Steklo i Keramika (Glass and Ceramics). Monthly scientific, technical and industrial journal

 

ISSN 0131-9582 (Online)

Total: 10 results found.

1. STUDY OF DEGRADATION OF LUMINESCENT PROPERTIES OF ERBIUM-DOPED ZINC-TELLURITE GLASSES UNDER TROPICAL CLIMATE CONDITIONS
(Not-set)
Glasses in the TeO2–ZnO system doped with Er3+, Yb3+, Nd3+ were studied. The influence of the synthesis atmosphere on the properties was determined. The photoluminescence intensity, absorption, refractive ...
2. Obtaining of High-Porous Ceramic Materials on the Basis of Alumina-Magnesia Spinel
(Not-set)
The object of research is ceramic foam materials based on aluminum oxide, magnesium oxide and aluminum-magnesia spinel. The results of research on sintering spinel ceramics using aluminum and magnesium ...
3. Electrospinning Formation of Zirconia Fibers
(Not-set)
The possibility of obtaining ceramic fibers of zirconium oxide by electrospinning is considered. The factors influencing the fiber diameter and the presence of tape inclusions have been established. It ...
4. Synthesis, Structure and Properties of One- and Multi-Component Additives for Ceramic Materials Based on Aluminum Oxide (review)
(Science for ceramic production)
One- and multicomponent sintering additives for ceramics based on aluminum oxide are presented. It has been established from the literature that the use of one-component additives is less effective than ...
5. Magnesium-Aluminate Spinel Fibers Obtained with Sol-Gel Process
(At the enterprises and institutes)
A sol-gel process for producing aluminum-magnesium spinel fibers from a fiber-forming precursor based on aluminum and magnesium polycarboxylates is considered. The principal possibility of obtaining discrete ...
6. Evaluation of structural parameters in hydrated silica gel microstruc-ture
(At the enterprises and institutes)
The preparation of a modern highly porous insulating material based on silicon dioxide is shown. Using factor analysis, the most significant parameters influencing the formation of the porous structure ...
7. Properties of commercial silicasol and its modification for alumosilicate materials production
(At the enterprises and institutes)
The properties of industrial silica sol, such as average particle size and size distribution, are considered. The influence of separation methods (filtration and centrifugal) on the indicated characteristics ...
8. Physico-chemical properties of molding solutions for alumosilicate fibrous materials fabrication
(At the enterprises and institutes)
The rheological properties and aggregate stability of molding solutions for the production of aluminosilicate fibrous materials are considered. The effect of acetate groups in polyvinyl alcohol on the ...
9. Properties of composite ceramics as a function of clay raw ratio
(Science for ceramic production)
A composition has been developed for obtaining a composite material with an anorthite crystalline phase for the manufacture of installation parts for low-voltage equipment. The effect of replacing a part ...
10. Resistance to deformation of glass-ceramic material
(Science for glass production)
1 The features of the production of glass-crystalline materials of the CaO - Al 2 O 3 - SiO 2 system by the methods of continuous rolling and pressing are considered. The results of studies on the ...