-
1.
Optimal speed of cooling for porous filler made from liquid-glass batches
-
(Utilization of waste)
-
The composition and method of obtaining highly porous materials at low-temperature swelling of liquid glass and ash-and-slag material from the combustion of oil shale, used as a filler and burnout additive, ...
-
2.
The influence of batch grain composition on processing and physico-chemical properties of granulated porous silicate filler
-
(Science for glass and ceramic production)
-
The possibility of using ash and slag waste from thermal power plants in the production of heat-insulating glass materials has been established. Compositions with different granulometric composition of ...
-
3.
Lead titanate batch composition influence on thermal expansion coefficience of low-melting glass materials for corundum leak-tight low-temperature soldering
-
(At the enterprises and institutes)
-
The influence of the granulometric parameters of crystalline lead titanate on the thermal expansion coefficient of soldering glass compositions used for low-temperature vacuum-tight soldering of corundum ...
-
4.
Industrial experience in redyeing glass melts from slag batches
-
(Science for glass production)
-
The modes of repainting of glass melt in industrial furnaces of "Chagodoshchensky Glass Factory and Co." Ltd. operating on slag charges are analyzed. It is shown that the efficiency of the process ...
-
5.
Regulating properties of silicon carbide ceramics by batch granu-lometry variation
-
(Science for ceramic production)
-
An energy-efficient method for creating composite materials based on SiC modified with oxide eutectic compositions with high mechanical characteristics has been proposed. The effect of varying the particle ...
-
6.
Single-fired ceramic batches based on gabbro-dolerite and soft red-burning clay
-
(Science for ceramic production)
-
New compositions of ceramic mass using gabbro-dolerite and moderately red-burning clay are presented. Mathematical modeling was carried out to determine the optimal raw material composition. The optimum ...
-
7.
The influence of batch composition and treatment conditions on spectral characteristics of glasses and glass-crystalline materials in Bi2O3 - SiO2 - GeO2 system
-
(Science for glass production)
-
Glasses of compositions Bi 4 (Si x Ge 1-x ) 3 O 12 (x = 0.33; 0.5; 0.66, 1.00) and glass-crystalline materials based on them. The influence of the composition of the charge and the modes of heat ...
-
8.
The effect of component composition and redox characteristics of batches on sponging of pyroplastic silicate masses
-
(Science for glass production)
-
The influence of the composition of the charge based on various silica raw materials and the redox characteristics of its components on the foaming processes in the production of glass-foam materials is ...
-
9.
The effect of the redox potentials of the glass batch and cullet on the dye of commercial glass containing iron oxides
-
(Science for glass production)
-
The influence of the redox potentials (ORP) of charges and glass breakage on the color of glasses of industrial compositions containing up to 0.5% iron oxides has been investigated. The boundaries of the ...
-
10.
SPECTROSCOPIC PROPERTIES OF ZINC-PHOSPHATE GLASSES SINGLE-DOPED WITH Er3+ AT DIFFERENT CONCENTRATIONS
-
(Not-set)
-
Spectral-luminescence properties of zinc-phosphate ZnO–P2O5 (PZ) glasses doped with 0.25…1.00 mol. % Er2O3 were studied. It has been shown that an increase in the Er2O3 concentration in the synthesized ...
-
11.
PRODUCTION OF GLASS FOAMS ON THE BASIS OF ROCKS
-
(Not-set)
-
The results of research on the production of granular and block foam glass materials based on widespread highly siliceous rocks and technogenic waste are presented. The main attention of researchers is ...
-
12.
Formers for Cellular Glass on the Basis of Ash and Slag Materials of TPP
-
(Not-set)
-
A number of charge compositions with anthracite as the main blowing agent have been developed. The density and strength of the synthesized samples have been determined. The process of formation of a cellular ...
-
13.
Phase Separation in Borosilicate Glasses Synthesized in the Soda-Colemanite-Quartz Sand Material System
-
(Science for glass production)
-
Complex studies of phase separation in borosilicate glasses synthesized in the system of materials soda-colemanite-quartz sand have been carried out. Areas of glasses resistant to crystallization and glasses ...
-
14.
Optimised grain particle size composition for foam-glass materials production based on Chernoyarskoe deposit diatomite
-
(Science for glass production)
-
The types and purpose of foam glass are considered, depending on the used blowing agents. Compositions with different granulometric composition of the charge have been developed, and heat treatment has ...
-
15.
Structure formation in foam-glass made of Novocherkassk GRES ash and slag waste
-
(Utilization of waste)
-
Compositions and technological parameters of the synthesis of cellular glass based on ash and slag waste from the Novocherkasskaya SDPP (heat-insulating layer of a multilayer silicate composite heat-insulating ...
-
16.
Heat insulation material based on local industrial raw materials
-
(Utilization of waste)
-
The results of experimental studies on the production of foam glass-crystalline materials based on technogenic raw materials using the technology of low-temperature synthesis of glass granulate are presented. ...
-
17.
Phase transformations of silicon-aluminum-magnesium systems based on a precursor obtained by micellar technology [20-25]
-
(Science for ceramic production)
-
Phase transformations of model compositions of cordierite ceramics based on silicon dioxide synthesized by micellar technology have been studied by thermogravimetry, differential scanning analysis, and ...
-
18.
Ceramic pigments based on raw materials of Uzbekistan
-
(Science for ceramic production)
-
Compositions of green, blue and turquoise ceramic pigments have been obtained using the principles of heterovalent atomic substitution based on calcium aluminosilicate anorthite, replacing calcium and ...
-
19.
Wetting natural alumosilicates with NaOH solution as a source of a pore-forming gas
-
(At the enterprises and institutes)
-
The features of thermally activated pore formation of zeolite-containing rocks (CP) and flask in alkaline compositions are considered. It has been established that the low-temperature pore-forming gas ...
-
20.
Foam glass production based on natural and man-made aluminosilicates
-
(Science for glass production)
-
The possibility of using aluminosilicate rocks and materials for glass melting, which can be used in the production of foam glass, is shown. Modular characteristics in assessing the suitability of aluminosilicate ...
