-
1.
Aspects of formation of titanium glaze coatings for floor tiles
-
(Coatings)
-
The efficiency of using titanium dioxide as a muffler for obtaining glass-crystalline wear-resistant semi-fritted glaze coatings of floor tiles with the required physicochemical and operational characteristics ...
-
2.
Formation of the black core upon quick-firing of floor tiles
-
(Science for ceramic production)
-
The results of studies of the formation of a black core during high-speed firing of floor tiles and methods of its elimination are presented. Tab. 3, bibliography: 5 titles.
-
3.
Phase Composition of Porcelain Tiles Based on Russian Raw Materials
-
(Not-set)
-
Obtained porcelain stoneware based on Russian raw materials at a relatively low temperature in the range of 1200 & ndash; 1250 & # 176; C. X-ray phase, IR spectroscopic and electron microscopic analyzes ...
-
4.
Production of vitrified wall tiles from stiff clay and industrial waste of Vladimir region
-
(Science for ceramic production)
-
The composition of the charge for the production of facing ceramics based on low-plasticity clay has been developed. As additives, the mixture is introduced (mass content, & # 37;) 10 & # 37; titanium ...
-
5.
PROSPECTS OF USING CLAYEY RAW MATERIALS OF THE STOLINSKIE KHUTORA DEPOSIT FOR PRODUCING BUILDING CERAMICS
-
(Not-set)
-
... clinker material, as well as ceramic floor tiles. Samles of building ceramics synthesized in the laboratory using clay from the Stolinskie Khutora deposit had the necessary set of physicochemical and performance ...
-
6.
PHYSICAL AND MECHANICAL PROPERTIES OF CERAMIC TILE IN THE COMPOSITION CLAY–DUNE SAND
-
(Not-set)
-
The article investigates the physical, mechanical and technological properties of ceramic plates in the composition of Kulatau clay and dune sands of the Tuprakkala massif located in the lower amudarya ...
-
7.
Fly Ash as a Technogenic Raw Material for the Production of Re-fractory and Insulating Ceramic Materials (Review)
-
(Not-set)
-
A review of the literature on the production of fly ash at thermal power plants and the level of its processing in Russia and abroad is presented. The properties of fly ash and its fields of application ...
-
8.
Research Black Core and Bloating During Firing of Porcelain
-
(At the enterprises and institutes)
-
One of the reasons for the relatively low quality of dense ceramic materials (porcelain stoneware, facade tiles and floor tiles) due to the appearance of a black core is the presence of unburned coal particles ...
-
9.
Design of ceramic lining material with self-glazing effect based on stiff clay
-
(Science for ceramic production)
-
The composition of the charge for facing ceramics based on low-plasticity clay with an additive containing boric acid and lithium carbonate as fluids, as well as titanium dioxide as a hardening additive ...
-
10.
Optimization of the fritted component composition in the raw mixture of wear-resistant coatings
-
(Coatings. Enamels.)
-
... for the production of floor tiles by reducing the synthesis temperature of the frit by 80-100 ° C and reducing its amount to 20-22.5% in the raw material compositions. Tab. 3, ill. 3, bibliography: 6 ...
-
11.
Using of Gzhel' polymineral clays in ceramic production
-
(Raw materials)
-
As a result of research and industrial tests, it was found that the clays of the Gzhel deposit can be used in the production of bricks, facade and floor tiles, as well as majolica, pottery, art, architectural ...
-
12.
The Use of Metallurgical Slag in the Tile Mass Composition
-
(Utilization of waste)
-
Compositions of slab masses using local clay and metallurgical slag have been investigated. The optimal composition of the mass of floor tiles was determined by the method of mathematical planning. The ...