-
1.
INFLUENCE OF THE MINERALOGICAL COMPOSITION OF CLAYS ON THE CAPILLARY-POROUS STRUCTURE AND FROST RESISTANCE OF CERAMIC BRICKS
-
(Not-set)
-
The influence of the mineralogical composition of clays on the microstructure and frost resistance of ceramic bricks has been studied. The pore radii were calculated by the method of capillary water saturation ...
-
2.
A Comprehensive Evaluation of the Effect of Mineralogical Composition of Clays and Component from Porous Glass on the Thermal Conductivity and Frost Resistance Heat-Efficient Wall Ceramics
-
(Science for ceramic production)
-
The results of studies of the porosity of heat-efficient ceramic materials based on clays of various mineralogical composition with a glass-porous component (SPC) and their effect on frost resistance and ...
-
3.
SYNTHESIS OF MARBLITE IN A PLASMA GLASS FURNACE
-
(Not-set)
-
... is considered. The operational parameters of marblite, such as water resistance, frost resistance, microhardness, and phase composition, have been studied. The color characteristics of marblite are determined ...
-
4.
ENERGY- AND RESOURCE-SAVING PLASMA TECHNOLOGY FOR GLAZING OF AUTOCLAVE-HARDENED BUILDING MATERIALS
-
(Not-set)
-
... it possible to increase such performance indicators as frost resistance, water resistance and microhardness. The features of the formation of the macro- and microstructure of the glaze coating when treating ...
-
5.
INFLUENCE OF NICKEL SLAGS ON STRUCTURAL CHANGES IN CERAMIC BRICKS
-
(Not-set)
-
... of the formation of the pore phase during the firing process and increases the frost resistance of products. At the same time, it has been established that an increase in the mass content of slag in the ...
-
6.
Relationship Between Properties, Phase Composition and Microstructure of Clinker Brick
-
(Not-set)
-
A clinker brick was obtained on the basis of polymineral raw materials, including low-melting and high-melting clays, loams and granitoid screenings with the plastic method of manufacturing. The relationship ...
-
7.
The Influence of Nepheline Syenite and Waste of Mineral Wool Production on the Operational Properties of Ceramics
-
(Not-set)
-
... as well as their frost resistance has been investigated. The use of NS in the amount of 5 - 15 & # 37; increases the compressive strength of the samples to 17 & # 37; and reduces the density, water absorption ...
-
8.
Study of the Influence of Nanotechnogenic Raw Materials and Pyrophyllite on Orientation of Clay Particles and Water Permeability of Acid Resistant Materials
-
(Not-set)
-
The use of nanotechnogenic aluminum-containing raw materials and pyrophyllite in the compositions of ceramic masses for the production of acid-resistant materials helps to reduce the shrinkage anisotropy ...
-
9.
Phase Composition of Porcelain Tiles Based on Russian Raw Materials
-
(Not-set)
-
Obtained porcelain stoneware based on Russian raw materials at a relatively low temperature in the range of 1200 & ndash; 1250 & # 176; C. X-ray phase, IR spectroscopic and electron microscopic analyzes ...
-
10.
Low-Temperature Co-Firable Ceramic Li2Zn3Ti4O12 with an Eutectic Additive in the Li2O-B2O3-SiO2 System
-
(Not-set)
-
In the Li 2 O-ZnO-TiO 2 system, a material has been developed for the technology of low-temperature co-firing of ceramics with a view to its use in the production of electronic components. The sintering ...
-
11.
Porosity Structure and Technical Properties of Ceramic Materials Based on Wastes of Nonferrous Metallurgy of Eastern Kazakhstan
-
(Not-set)
-
Clinker materials were obtained from non-ferrous metal waste, where the clay part of the tailings was used as the clay material. gravity of zircon-ilmenite ores (GZI), and feldspar concentrate (PShK) - ...
-
12.
Effect of Municipal Solid Waste Incineration Fly Ash on Properties, Durability and Environmental Toxicity of Fired Aluminosilicate
-
(Utilization of waste)
-
... EC. The density of such fired aluminosilicates is 1.8 g / cm 3 , compressive strength 24MPa, water absorption 15.3 & # 37;, total open porosity 31 & # 37;, frost resistance at least 25 freeze and thaw ...
-
13.
New construction materials with enhanced strength based on met-als industrial waste
-
(Utilization of waste)
-
... abrasion resistance, and frost resistance, have been developed. They are technologically advanced, environmentally friendly, their production can be realized on an extensive base of raw materials with ...
-
14.
Effect of superplastisizer «Polyplast SP-3» addition on concrete properties
-
(At the enterprises and institutes)
-
... The acceleration of the setting speed of the composition with the additive due to its peptizing effect has been established. At the same time, an increase in the strength indicators and frost resistance ...
-
15.
Brick clay modifier activation by ultrasonic extrusion
-
(Upgrading of quality)
-
The properties of ceramics in the case of clay modification with a small addition of glass fiber during ultrasonic extrusion of laboratory specimens have been investigated. Ultrasound enhances the hardening ...
-
16.
Ultrasonic draw die prototyping for ceramic bricks extrusion
-
(Science for ceramic production)
-
A reduced prototype of a die for extrusion of ceramic bricks with the application of ultrasonic vibrations from a magnetostrictive transducer to the walls of the die was tested. Improved extruder performance. ...
-
17.
Glassceramics based on mill tailings of lead-zink ores
-
(Utilization of waste)
-
Glass-ceramic material was obtained from the "tailings" of concentration of lead-zinc ores. The strength of the control samples was 22.26 MPa in bending and 90.22 MPa in compression. After 100 ...
-
18.
Estimation of competitive power for wall materials with glassy protective and decorative coatings made by plasma vitrification
-
(Efficiency and quality)
-
For the first time, the results of studies on the development of a scale of desirability for assessing the competitiveness of wall building materials with glassy protective and decorative coatings are ...
-
19.
Estimating the applicability of clay raw materials for wall and facing ceramics production
-
(Raw materials)
-
Studied the mineral composition of clay raw materials from 48 deposits of Ukraine, which have industrial application. The influence of the mineral composition of clays on the properties of ceramic materials ...
-
20.
Production of composite materials based on Kul'-Yurt-Tau pyrophillites
-
(Science for ceramic production)
-
... low thermal expansion, low thermal conductivity, high frost resistance and heat resistance. Such materials can be recommended as refractory and structural materials for their use in the temperature range ...
