-
1.
Heat-Resistance Improvement of Glass Fiber-Reinforced Plastics under Industrial
Conditions
-
(Not-set)
-
Pilot winding of three batches of fiberglass rods was carried out on the production line. The optimal composition of the EDI binder was selected with the ratio of the components ED-22 / IMTGFA / UP-606/2 ...
-
2.
A Comprehensive Evaluation of the Effect of Mineralogical Composition of Clays and Component from Porous Glass on the Thermal Conductivity and Frost Resistance Heat-Efficient Wall Ceramics
-
(Science for ceramic production)
-
The results of studies of the porosity of heat-efficient ceramic materials based on clays of various mineralogical composition with a glass-porous component (SPC) and their effect on frost resistance and ...
-
3.
Influence of SiO2/Al2O3 ratio on structure, properties and heat resistance of geo-polymer refractory materials
-
(At the enterprises and institutes)
-
A study of the properties of lightweight geopolymer materials (GM) based on refractory technogenic waste of aluminosilicates has been carried out. The effect of the ratio of oxides SiO 2 and Al 2 O ...
-
4.
Heat resistance of glass melt wall layer in glass kiln refractory walls high-temperature corrosion zone
-
(Science for glass production)
-
A scientifically substantiated applied technique for engineering calculation of the thermal resistance of the wall layer has been developed. the temperature of the melt and the composition of the glass ...
-
5.
Effect of nanosized petrochemical waste with high alumina content on clinker heat resistance
-
(Science for ceramic production)
-
Studies have shown that it is advisable to use high-alumina nanotechnological raw materials as a softener to increase the thermal stability of clinker bricks. With an increase in the compositions of the ...
-
6.
The impact of thermochemical treatment of glass samples on its heat resistance and the nature of destruction
-
(Science for glass production)
-
The results of studies of the thermal stability of float glass samples with modified surfaces are presented. The nature of glass destruction during testing is shown. It was found that the thermochemical ...
-
7.
Influence of the technological parameters of float glass manufacturing on the heat resistance
-
(Science for glass production)
-
The article presents the results of studies of the thermal stability of heat-absorbing float glass with a thickness of 4.0 - 12.0 mm. It is shown that heat-absorbing glass has high thermal stability (more ...
-
8.
THE PROCESS OF FORMATION OF CRYSTALLINE PHASES IN HEAT-RESISTANT CORDIERITE-CONTAINING ELECTRICAL MATERIALS
-
(Not-set)
-
The article presents the results of studies of heat-resistant insulating ceramics, as well as a mechanism of cordierite phase formation during single firing of compositions containing polymineral clay ...
-
9.
HEAT-INSULATING MATERIALS BASED ON EXPANDED ROCKS OF UZBEKISTAN
-
(Not-set)
-
The work is devoted to the issues of obtaining thermal insulation materials using local mineral resources. The focus of this study is to create refractory thermal insulation consisting of a porous filler ...
-
10.
HEAT-RESISTANT MULTIFUNCTIONAL COATING FOR THE PROTECTION OF CORROSION-RESISTANT STEEL PARTS
-
(Not-set)
-
A new heat-resistant multifunctional glass-based coating has been developed in the BaO–B2O3–SiO2 system, which protects parts made of corrosion-resistant steels from high-temperature gas corrosion at temperatures ...
-
11.
SYNTHESIS OF A FRIT FOR OBTAINING ENAMEL COATING OF STEEL PIPES BY THE METHOD OF INDUCTION HEATING
-
(Not-set)
-
The paper presents the results of a study of the processes of glass formation during the production of a frit by the method of induction heating. According to X-ray phase analysis, the resulting frit is ...
-
12.
INFLUENCE OF THE MINERALOGICAL COMPOSITION OF CLAYS ON THE CAPILLARY-POROUS STRUCTURE AND FROST RESISTANCE OF CERAMIC BRICKS
-
(Not-set)
-
The influence of the mineralogical composition of clays on the microstructure and frost resistance of ceramic bricks has been studied. The pore radii were calculated by the method of capillary water saturation ...
-
13.
Heat Res?stance of Glass Pipe Cover?ng
-
(Not-set)
-
... in the heat resistance of the pipe coating. This phenomenon is associated with an increase in temperature gradients when heating or cooling thick coatings compared to thin pipe coatings. It was found that ...
-
14.
Pilot Testing of Heat-Resistant Citall Coating for High-Temperature Corrosion Protection of Nichrome Alloys
-
(Coatings)
-
The results of tests in laboratory and production conditions of the developed heat-resistant sitall coatings for the protection of expensive nichrome alloys based on technogenic raw materials are presented. ...
-
15.
Fluid-Glass Radiation-Resistant Heat-Regulating Coating
-
(Coatings)
-
A study of pigments and binders was carried out to obtain a radiation-resistant thermoregulatory coating (TRP) for spacecraft. On the basis of the selected components, a radiation-resistant thermo-regulating ...
-
16.
Effect of glass devitrification in porous fillers on alkali resistance of concrete
-
(Science for glass production)
-
The chemical activity to cement alkalis (ASR interaction) of porous fillers - foam ceramics and geopenositals (analogs of foam glass and foam glass) in an alkaline medium simulating the liquid phase of ...
-
17.
Characteristics of heat transfer through glass-melting tank walls
-
(Science for glass production)
-
A technique has been developed for the engineering calculation of the thermal resistance of the wall layer of glass, which allows, by taking into account the physical nature of the heat transfer process ...
-
18.
Indirect assessment of actual heat transfer coefficients in air cool-ing systems of operating glass kilns
-
(Science for glass production)
-
A scientifically substantiated applied technique for indirect assessment of the actual intensity of convective heat removal during jet cooling of corrosive zones of the melting basin of glass-making furnaces ...
-
19.
Research in technological parameters for obtaining heat-resistant grey, isabel and taupe ceramic pigments
-
(Science for ceramic production)
-
The results of the study of solid-phase synthesis and technological parameters for obtaining weather-resistant ceramic pigments of gray, gray-yellow and gray-brown colors are presented. The physicochemical ...
-
20.
Current state and prospects of development of vitreous foamed heat-insulating materials manufacturing
-
(At the enterprises and institutes)
-
The advantages and disadvantages of heat-insulating materials offered in the construction market of the CIS are stated. It is noted that, in terms of the totality of characteristics, foam glass surpasses ...
