-
1.
Heat-Resistance Improvement of Glass Fiber-Reinforced Plastics under Industrial
Conditions
-
(Not-set)
-
Pilot winding of three batches of fiberglass rods was carried out on the production line. The optimal composition of the EDI binder was selected with the ratio of the components ED-22 / IMTGFA / UP-606/2 ...
-
2.
A Comprehensive Evaluation of the Effect of Mineralogical Composition of Clays and Component from Porous Glass on the Thermal Conductivity and Frost Resistance Heat-Efficient Wall Ceramics
-
(Science for ceramic production)
-
The results of studies of the porosity of heat-efficient ceramic materials based on clays of various mineralogical composition with a glass-porous component (SPC) and their effect on frost resistance and ...
-
3.
Heat resistance of glass melt wall layer in glass kiln refractory walls high-temperature corrosion zone
-
(Science for glass production)
-
A scientifically substantiated applied technique for engineering calculation of the thermal resistance of the wall layer has been developed. the temperature of the melt and the composition of the glass ...
-
4.
The impact of thermochemical treatment of glass samples on its heat resistance and the nature of destruction
-
(Science for glass production)
-
The results of studies of the thermal stability of float glass samples with modified surfaces are presented. The nature of glass destruction during testing is shown. It was found that the thermochemical ...
-
5.
Influence of the technological parameters of float glass manufacturing on the heat resistance
-
(Science for glass production)
-
The article presents the results of studies of the thermal stability of heat-absorbing float glass with a thickness of 4.0 - 12.0 mm. It is shown that heat-absorbing glass has high thermal stability (more ...
-
6.
Heat Res?stance of Glass Pipe Cover?ng
-
(Not-set)
-
... in the heat resistance of the pipe coating. This phenomenon is associated with an increase in temperature gradients when heating or cooling thick coatings compared to thin pipe coatings. It was found that ...
-
7.
Fluid-Glass Radiation-Resistant Heat-Regulating Coating
-
(Coatings)
-
A study of pigments and binders was carried out to obtain a radiation-resistant thermoregulatory coating (TRP) for spacecraft. On the basis of the selected components, a radiation-resistant thermo-regulating ...
-
8.
Effect of glass devitrification in porous fillers on alkali resistance of concrete
-
(Science for glass production)
-
The chemical activity to cement alkalis (ASR interaction) of porous fillers - foam ceramics and geopenositals (analogs of foam glass and foam glass) in an alkaline medium simulating the liquid phase of ...
-
9.
Characteristics of heat transfer through glass-melting tank walls
-
(Science for glass production)
-
A technique has been developed for the engineering calculation of the thermal resistance of the wall layer of glass, which allows, by taking into account the physical nature of the heat transfer process ...
-
10.
Indirect assessment of actual heat transfer coefficients in air cool-ing systems of operating glass kilns
-
(Science for glass production)
-
A scientifically substantiated applied technique for indirect assessment of the actual intensity of convective heat removal during jet cooling of corrosive zones of the melting basin of glass-making furnaces ...
-
11.
Development of glass-filled composite materials with improved fire resistance
-
(At the enterprises and institutes)
-
The results of the development and modeling of large-sized products based on sheet thermoplastic composite materials with increased fire resistance, which are a three-layer sandwich structure, obtained ...
-
12.
Effect of nanosized petrochemical waste with high alumina content on clinker heat resistance
-
(Science for ceramic production)
-
Studies have shown that it is advisable to use high-alumina nanotechnological raw materials as a softener to increase the thermal stability of clinker bricks. With an increase in the compositions of the ...
-
13.
Heat insulation of refractory brickwork in glass kilns
-
(Equipment)
-
Based on the results of mathematical modeling, the average and maximum heating temperatures of the side walls of the working space of a glass-melting furnace with a specific glass removal rate of 2.9 t ...
-
14.
Thermal resistance of green container glass
-
(Science for glass production)
-
The influence of individual production factors on the heat resistance of glass containers has been studied. It is shown that the use of quartz raw materials with a grade that differs from that adopted ...
-
15.
Foam-glass based composite heat-insulating material with protective-decorative coating of the face surface
-
(Energy saving)
-
Prospects for obtaining heat-insulating foam glass with a protective and decorative coating are considered, which will increase the water resistance, durability of the material, and also improve its decorative ...
-
16.
Water-resistance of the mold surface of float glass
-
(Science for glass production)
-
The results of studies of the water resistance of float glass from different manufacturers (both original and tempered) are presented. It was revealed that for heat-absorbing and colorless float glass ...
-
17.
Elecroconducting and heat-insulating paint work materials based on nickelized glass spheres
-
(Coatings. Enamels.)
-
It has been established that nickel-plated hollow glass microspheres can be used as a conductive and heat-insulating filler for paints and varnishes to obtain coatings on their basis with low values ??of ...
-
18.
Testing of laminate glass for impact-resistance
-
(Science for glass production)
-
Comparative tests of laminated glass of various completing for impact resistance were carried out. Tests have confirmed the possibility of using glass subjected to a special heat treatment for the production ...
-
19.
Resistance to deformation of glass-ceramic material
-
(Science for glass production)
-
... influence of various factors on the amount of vertical deformation arising during heat treatment of such materials are presented. It is shown that the different nature of the crystallization processes ...
-
20.
THE PROCESS OF FORMATION OF CRYSTALLINE PHASES IN HEAT-RESISTANT CORDIERITE-CONTAINING ELECTRICAL MATERIALS
-
(Not-set)
-
The article presents the results of studies of heat-resistant insulating ceramics, as well as a mechanism of cordierite phase formation during single firing of compositions containing polymineral clay ...
