-
1.
METHODS OF FORMING COMPLEX PROFILE PRODUCTS FROM HEAT-RESISTANT CERAMIC MATERIALS BASED ON SILICON CARBIDE
-
(Not-set)
-
The possibility of obtaining complex-shaped mechanical engineering products based on reaction-sintered silicon carbide using two methods - mechanical processing of polymerized blanks before sintering and ...
-
2.
The Prospects for the Use of Clay Raw Materials From the "Krupeisky Sad" Deposit For Obtaining Heat-Resistant Ceramic Product
-
(Not-set)
-
... of the formation of the structure and phase composition of heat-resistant ceramic materials obtained with the use of polymineral clay raw materials, in connection with the physicochemical properties and ...
-
3.
Rheological characteristics of the slips in the production of heat-resistant lithium aluminum silicate ceramics
-
(Raw materials)
-
... LC) on the rheological properties and stability of the ceramic slip used to obtain heat-resistant lithium aluminum silicate ceramics. It was found that the maximum liquefaction of the ceramic suspension ...
-
4.
Heat-resistant thermal insulation products based on aluminosilicate fiber experience of usage in the lining of thermal units of ceramic industry
-
(Industrial experience. Energy saving.)
-
The structure and properties of the developed high-alumina products based on aluminosilicate fiber are shown. The application of the developed NK-29 products in the lining of high-temperature thermal units ...
-
5.
Using of nontraditional raw materials for production of heat-resistant ceramics
-
(Science for ceramic production)
-
The possibility of using non-traditional raw materials for the production of heat-resistant cordierite-containing ceramics is shown. On the basis of refractory and low-melting Belarusian clays, cordierite-containing ...
-
6.
CORROSION AND HEAT-RESISTANT NANOPOROUS CERAMIC MATERIALS BASED ON Y2O3 AND ?-Al2O3
-
(Not-set)
-
Porous ceramic materials, including those with the addition of ?-Al2O3 of the order of 10 %, were obtained on the basis of yttrium oxide, which is inert to sintering and has cubic syngony. The characteristics ...
-
7.
GEL CASTING METHOD FOR THE PRODUCTION OF CERAMIC MATERIALS
-
(Not-set)
-
Gel casting is one of the new and promising methods for producing ceramics. Modern research on the production of ceramic materials by gel casting covers a wide range of materials, including both dense ...
-
8.
Cordierite Glass-Ceramic for Radioengineering Products
-
(Science for ceramic production)
-
A porous cordierite glass-ceramic was obtained. The processes of crystallization and sintering are considered, some properties of cordierite glass-ceramics made of magnesium-aluminosilicate glass are determined. ...
-
9.
Studies in high-performance alumina ceramics development (review). Part 1. Sintering with additives, reactive sintering, reinforced composites production
-
(Science for ceramic production)
-
A review of domestic dissertations on ceramics from aluminum oxide, methods of its preparation for the period since 2000 is presented. Thin structural ceramics are mainly considered. The emphasis is on ...
-
10.
Rheological behaviour of ceramic slurries and physic-mechanic properties of acidresistant ceramics made of nanosized petroleum chemistry and non-ferrous metals production industrial waste, and pyrophy
-
(Utilization of waste)
-
A significant effect of the amount of aluminum-containing nanotechnogenic raw materials based on non-ferrous metallurgy and pyrophyllite on the structural and rheological properties of ceramic masses for ...
-
11.
Research in technological parameters for obtaining heat-resistant grey, isabel and taupe ceramic pigments
-
(Science for ceramic production)
-
The results of the study of solid-phase synthesis and technological parameters for obtaining weather-resistant ceramic pigments of gray, gray-yellow and gray-brown colors are presented. The physicochemical ...
-
12.
Use of aluminous waste from nonferrous industry in ceramic clinker production
-
(Utilization of waste)
-
Compositions of ceramic masses for the production of clinker products based on unenriched kaolin and nanotechnogenic raw materials in the form of alkaline etching sludge of aluminum and its alloys of the ...
-
13.
Effect of kolemanite additives on the properties, microstructure and sintering of heat-resistant spodumene ceramics
-
(Science for ceramic production)
-
The influence of colemanite additives on sintering, properties and microstructure of spodumene ceramics has been investigated. It has been established that the introduction of colemanite in an amount of ...
-
14.
RESEARCH OF THE DEPENDENCE OF THE THERMAL STRENGTH PROPERTIES OF REFRACTORY MATERIALS OF THE LADLE LINING OF THE FERROALLOY PRODUCTION ON TEMPERATURE
-
(Not-set)
-
The article is devoted to the study of the dependence of the change in compressive strength on temperature for refractory materials of the lining of a pouring ladle of ferroalloy production – fireclay ...
-
15.
COMPREHENSIVE STUDY OF THE BARKHAN SANDS OF THE KUSHKUPYR DEPOSIT FOR THE PRODUCTION OF SODIUM SILICATE IN THE MICROSILICA–BARKHAN SAND–CAUSTIC SODA SYSTEM
-
(Not-set)
-
The chemical and mineralogical composition, grain structure and physicochemical properties of unenriched dune sands located in the Kushkupyr district of Uzbekistan were studied. Analysis of the granulometric ...
-
16.
EVALUATION OF ARMOR PROPERTIES OF DIAMOND-SILICON CARBIDE CERAMIC MATERIAL FABRICATED BY REACTION SINTERING TECHNOLOGY
-
(Not-set)
-
This study demonstrates the functional advantages of reaction-sintered diamond-silicon carbide (D–SiC) ceramics for armor applications compared to conventional materials including silicon carbide, boron ...
-
17.
CERAMIC-FORMING ORGANOSILICON POLYMER AS A MODIFIER OF HEAT-INSULATING SYNTHETIC MATERIAL
-
(Not-set)
-
The paper presents the results of obtaining hardened synthetic carbon materials that can be used for technical thermal insulation under conditions of elevated pressures and temperatures. The hardened syntactic ...
-
18.
PIEZOCERAMICS TECHNOLOGIES: APPROACHES FOR ENVIRONMENTAL IMPACT MITIGATION
-
(Not-set)
-
The functional ceramic materials are broadly used in the electronic industry. Many of them are comprised of ferroelectric materials because of their outstanding piezoelectric and dielectric properties. ...
-
19.
The Phase Composition and Physico-Mechanical Properties at Different Temperatures of Ceramic Firing Earthquake-Resistant Bricks Using Ferroli
-
(Not-set)
-
Ceramic bricks based on low-melting clay and ferro-dust were obtained from self-decaying slags of low-carbon ferrochrome in the temperature range 950 - 1100 ° C, which have grades from M100 to M175, respectively. ...
-
20.
Obtaining of High-Porous Ceramic Materials on the Basis of Alumina-Magnesia Spinel
-
(Not-set)
-
The object of research is ceramic foam materials based on aluminum oxide, magnesium oxide and aluminum-magnesia spinel. The results of research on sintering spinel ceramics using aluminum and magnesium ...
