-
1.
Foam-Glass Ceramics Synthesis with Application of Mechanized Preparation of the Batch by Extrusion Method
-
(Glassceramics)
-
The synthesis of an inorganic heat-insulating material - glass-foam ceramics with the use of activating methods for preparing a charge in the form of its extrusion and autoclaving is considered. The interaction ...
-
2.
Brick clay modifier activation by ultrasonic extrusion
-
(Upgrading of quality)
-
The properties of ceramics in the case of clay modification with a small addition of glass fiber during ultrasonic extrusion of laboratory specimens have been investigated. Ultrasound enhances the hardening ...
-
3.
PIEZOCERAMICS TECHNOLOGIES: APPROACHES FOR ENVIRONMENTAL IMPACT MITIGATION
-
(Not-set)
-
The functional ceramic materials are broadly used in the electronic industry. Many of them are comprised of ferroelectric materials because of their outstanding piezoelectric and dielectric properties. ...
-
4.
ASSOCIATED SYNTHESIS OF MICROGRANULAR FOAM-GLASS CERAMICS FROM DIATOMACEOUS CLAYS
-
(Not-set)
-
The technology of synthesis of porous microgranular material based on diatomaceous clay is considered. The process of foaming microgranules in an industrial furnace was implemented in the way of obtaining ...
-
5.
OXIDE-CONTAINING MINERAL FIBERS: TYPES, METHODS OF PRODUCTION, APPLICATION AND MANUFACTURERS (REVIEW)
-
(Not-set)
-
... and continuous fibers, such as spinning fibers from melts, sol-gel technology, spinning from solutions of metal salts, etc., are described. filtration for alumino-silicate and bio-soluble fibers; thermal ...
-
6.
Production of aluminum-graphite composite by spark-plasma sintering
-
(At the enterprises and institutes)
-
... aluminum carbide is revealed. It is shown that the use of larger graphite plates reduces the formation of Al 4 C 3 by almost 2 times. The influence of the graphite content on the density, thermal expansion ...
-
7.
Effect of molding composition and properties on alumina block substrates characteristics
-
(Science for ceramic production)
-
Ceramic block supports were obtained by extrusion molding, varying the particle size and the conditions for obtaining corundum. The structural and mechanical properties of the molding mixtures were investigated, ...
-
8.
Research in highly loaded calcium phosphate slurries for producing shaped bioceramic bodies
-
(Biomaterials)
-
... bioceramics with a gyroid architecture were made by casting water slips into polymer molds with a gyroid geometry, produced by thermal extrusion and stereolithographic 3D printing. The limitations of this ...
