-
1.
Editorial Board
-
...
MEMBER OF THE EDITORIAL BOARD
Alexander B. Zhimalov
Doctor of Technical Sciences
OJSC "Saratov Institute of Glass"
https://elibrary.ru/author_profile.asp?id=580632&
...
-
2.
INORGANIC FOAMED THERMAL INSULATION MATERIALS BASED ON MINERAL SILICA-CONTAINING RAW MATERIALS
-
(Not-set)
-
Thermal insulation and composite foamed inorganic materials with a reduced thermal conductivity of 0,064…0,076 W/(m·K) have been developed on the basis of technogenic silica-containing raw materials. The ...
-
3.
PRODUCTION OF GLASS FOAMS ON THE BASIS OF ROCKS
-
(Not-set)
-
The results of research on the production of granular and block foam glass materials based on widespread highly siliceous rocks and technogenic waste are presented. The main attention of researchers is ...
-
4.
The Dielectric Method for Controlling the Recipe and Technologi-cal Parameters Upon Receipt of Sodium Silicate Materials
-
(Not-set)
-
The results of the study of the dielectric constant & # 949; modified sodium silicate compositions (SNK) depending on the content of the modifying zinc-containing aqueous solution (zinc acetate) and the ...
-
5.
Glass Cutting Technoligy Using the Two Different Lasers
-
(Not-set)
-
A new technology for laser cutting glass along a curved contour is described, which combines the combined use of two different cutting methods in one technological cycle: the method of laser controlled ...
-
6.
Synthesis and Properties of Porous Glass Composite Modified by Silicon Carbide
-
(Not-set)
-
The synthesis and properties of a porous glass composite obtained on the basis of cullet powder at temperatures not exceeding 100 ° C using aluminum powder and liquid glass are considered. It is shown ...
-
7.
Physico-chemical studies of gaize as alternative raw materials for foam-glass and foamed materials production
-
(Science for glass production)
-
Are the data of physical and chemical studies of flasks given? chemical, phase and granulometric composition, degree of crystallinity, as well as their thermal stability in the temperature range of 90 ...
-
8.
Features of titania micro- and nanoparticles sol-gel synthesis for a composite hybrid antireflection layer on float glass
-
(Science for glass production)
-
The sol-gel processes occurring during hydrolysis in the presence of a surfactant, diethylamine, have been studied. It has been shown that the rate of tetrabutoxytitanium hydrolysis at minimum water concentrations ...
-
9.
Precision cutting of glass and other brittle materials by controlled laser thermal splitting (a review)
-
(Science for glass production)
-
The results of the successful application of the method of laser controlled thermal cleavage (LUT) for precision cutting of glass, ceramics and other brittle non-metallic materials are presented. Other ...
-
10.
Use of amorphous silica rocks (gaizes) in production of foamglass with reduced sponging temperature
-
(Science for glass production)
-
Informational data on the use of amorphous siliceous rocks for the production of foam glass, as well as the results of laboratory studies on the study of the dependence of the foaming temperature on the ...
-
11.
Modeling of float-glass laser cutting process
-
(Science for glass production)
-
The results of mathematical and experimental modeling of the process of transverse cutting of float glass in the process of production by the method of laser controlled thermal splitting (LUT) are presented. ...
-
12.
Anniversary of I. N. Gorina
-
(Jubilee)
-
Inessa Nikolaevna Gorina turns 80 on April 4, 2016. I. N. Gorina is a well-known scientist and specialist in the field of glass technology, sheet glass compositions, candidate of technical sciences, senior ...
-
13.
Approaches to glass toughening. Glass surface layer modification
-
(Automation and mechanization of production)
-
An increase in glass strength can be achieved by modifying the surface layer. Considered: gradient glasses, in which the strength of the glass increases due to the difference in TCLE over the thickness ...
-
14.
Glassware toughening by ultrafine nanoadditives
-
(Science for glass production)
-
The effect of the use of ultradispersed (nano) materials on the strength characteristics of glass samples of various chemical compositions obtained by high-temperature sintering from powder-forming components ...
-
15.
Mechano-chemical activation of sand in AGO-2 centrifugal planetary mill
-
(Science for glass production)
-
The effect of mechanical dispersion on quartz sand using a centrifugal planetary mill AGO-2 has been investigated. It is shown that at a constant grinding time, but at different intensities of action in ...
-
16.
The use of fine-dispersed mixture of SiO2 + Sе as a colorant in tinted glass production
-
(Science for glass production)
-
A dye based on selenium obtained by converting it into micro- and nanostates by the method of mechanical dispersion with the use of the main component of the glass batch, quartz sand, as a matrix-stabilizer, ...
-
17.
Using of the glass cut in the manufacture of building materials
-
(Utilization of waste)
-
The issues of the formation of glass breakage both in the form of solid household waste and at the industrial processing of flat glass are considered. The prospect of using cullet in the manufacture of ...
-
18.
The modern technologies of float glass cutting
-
(Science for glass production)
-
The main types of cutting of sheet glass are considered. Mechanical roller cutting is described in most detail as the most common at the moment. Explains the effect of roller geometry and loading on edge ...
-
19.
Thermochemical modification of the surface of the moving glass ribbon
-
(Science for glass production)
-
The results of studies on thermochemical modification of the glass ribbon surface during its continuous production are presented. It is shown that the application of a composite coating developed by the ...
-
20.
Synthetic raw materials for float glass production
-
(Science for glass production)
-
The prospects of replacing the traditional charge with a charge containing synthetic raw materials (SSM) or entirely consisting of SSM are shown. This will allow saving raw materials and fuel and energy ...
