-
1.
ASSESSMENT OF THE EFFECT OF LITHIUM CHLORIDE ON THE PROPERTIES OF BOROPHOSPHATE GLASS DURING THE IMMOBILIZATION OF RADIOACTIVE WASTE FROM PYROCHEMICAL PROCESSING OF SPENT NUCLEAR ...
-
(Not-set)
-
The paper presents the results of the studies of a matrix based on borophosphate glass (BFS) with the addition of lithium chloride as a simulator of spent electrolyte, a type of radioactive waste formed ...
-
2.
Mechanism of Structural and Phase Formation of Hollow Alumino-Magnesium Spinel Microspheres when Producing Powders Using the Chemical Dispersion of Aluminum-Magnesium Alloys
-
(Not-set)
-
The results of a study of the processes underlying the formation of hollow alumina-magnesia microspheres during chemical dispersion of aluminum-magnesium alloys with an increased magnesium content are ...
-
3.
Effect of pH and the Duration of Rotational Mixing of Slip on the Percent of Crack Rejects of Quartz Glass Ceramics
-
(Not-set)
-
According to the results of statistical analysis of data on the preparation of slip from quartz glass and data on the scrap of ceramic products, the effect of pH and the duration of rotary mixing of the ...
-
4.
Low-Shrink Ceramics Based on Dolerite Fine Waste of Crushed Stone Production
-
(Science for ceramic production)
-
The results of the possibility of using dolerite fine-grained waste of crushed stone production in ceramic charges for the manufacture of low-shrinkage products are presented. It was found that solid-phase ...
-
5.
Improving Technology of Ceramic High-Porous Permeable Cellular Materials
-
(Science for ceramic production)
-
The rheological properties of corundum suspensions have been investigated. It is shown that for the preparation of corundum slip in the preparation of ceramic highly porous permeable cellular materials ...
-
6.
Production of ceramic materials based on SiC with low-melting ox-ide additives
-
(Science for ceramic production)
-
Dense materials based on silicon carbide were obtained by liquid-phase sintering. The oxides MgO, Y 2 O 3 and Al 2 O 3 , corresponding to the composition of yttrium-aluminum garnet, were used as ...
-
7.
Structural ceramics from mining waste
-
(Utilization of waste)
-
The possibility of using mining waste in the form of magnesium silicate rocks - troctolites in the production of building ceramics has been studied. It was found that the introduction of troctolite into ...
-
8.
Glassware forming (a review)
-
(Science for glass production)
-
Various methods of forming glassware, their physicochemical and technological features are considered. At the same time, the structural and deformation characteristics of glass-forming melts, the performance ...
-
9.
Ceramic batch based on pyroxenite and low-melting clay
-
(Science for ceramic production)
-
The composition of low-shrinkage ceramics based on pyroxenite has been developed. The natural components used in the ceramic mass, including pyroxenite, low-melting clay, and additionally cullet, make ...
-
10.
Improvement of energy efficiency in glass container production by use of mineral raw materials
-
(Science for glass production)
-
Is it possible to reduce energy consumption in the production of glass containers by reducing the melting temperature of glasses by partially replacing traditional raw materials with alternative silicon-containing ...
-
11.
Rheological behavior of porcelain slurry with bio-surfactants
-
(Science for ceramic production)
-
The effect of culture liquids with bacteria Acinetobacter johnsonii str. J221 and Pseudomonas aeruginosa str. Gd on the rheological properties of a porcelain slip. The surface activity of the culture liquid ...
-
12.
Serpenitine ceramic heat-insulation material
-
(Science for ceramic production)
-
The composition of the heat-insulating porous material based on serpentinite has been developed. The natural components used in the charge, including serpentine and lake diatomite, make it possible to ...
-
13.
Yachevskii Optimization of physical and chemical processes upon glass batch preparation and assessment of the humidity effect on the efficiency of glass melting
-
(Science for glass production)
-
The analysis of physical and chemical processes and individual factors affecting the homogeneity of the charge both when mixing the components of the charge in the mixer of the compound shop, and during ...
-
14.
Low-temperature synthesis of the quenched cullet from the silica-based batch in production of foam materials
-
(Science for glass production)
-
The possibility of obtaining glass granulate as an intermediate product for glass-ceramic foam materials based on widespread silica components (marshallite, diatomite, flask) at temperatures not exceeding ...
-
15.
Process features of using marshallite in container glass production
-
(Science for glass production)
-
The results of the study of the possibility of using the marshallite of the Elbashinsky deposit in the production of container glass are presented. The physicochemical characteristics of marshallite and ...
-
16.
Procedure of the uniform glass batch production
-
(Science for glass production)
-
A method is proposed for obtaining a chemically homogeneous glass batch by introducing fine and hygroscopic raw materials in the form of microgranules into its composition, followed by compaction of the ...
-
17.
Ceramic with low TCLE for deposition of Nb2O5 protecting coating
-
(Science for ceramic production)
-
The thermal expansion of mullite-cordierite, mullite and quartz ceramics, which was used to obtain materials with protective coatings from Nb 2 O 5 , has been investigated. It is shown that, in terms ...
-
18.
Using of granulated raw concentrates in glass technology
-
(Raw materials)
-
The possibilities of using substandard raw materials in the form of granular raw concentrates in glass technology have been investigated. It has been established that the use of granular raw concentrates ...
-
19.
Using of natural soda from Mikhailoivskoe deposit in production of building glass
-
(Raw materials)
-
The fundamental possibility of using natural soda for partial replacement of traditional soda-containing raw materials in the technology of sheet and other types of glass has been established. The physicochemical ...
-
20.
Detonation synthesis of f.c.c. cuprite
-
(Science for ceramic production)
-
When the detonation products of C 4 H 4 N 8 O 14 interact with copper, tenorite and a previously unknown modification of cuprite with face-centered cubic lattice with a = 12.078 E. X-ray diffraction ...
