-
1.
INORGANIC FOAMED THERMAL INSULATION MATERIALS BASED ON MINERAL SILICA-CONTAINING RAW MATERIALS
-
(Not-set)
-
Thermal insulation and composite foamed inorganic materials with a reduced thermal conductivity of 0,064…0,076 W/(m·K) have been developed on the basis of technogenic silica-containing raw materials. The ...
-
2.
PRODUCTION OF GLASS FOAMS ON THE BASIS OF ROCKS
-
(Not-set)
-
The results of research on the production of granular and block foam glass materials based on widespread highly siliceous rocks and technogenic waste are presented. The main attention of researchers is ...
-
3.
Synthesis and Properties of Porous Glass Composite Modified by Silicon Carbide
-
(Not-set)
-
The synthesis and properties of a porous glass composite obtained on the basis of cullet powder at temperatures not exceeding 100 ° C using aluminum powder and liquid glass are considered. It is shown ...
-
4.
Physico-chemical studies of gaize as alternative raw materials for foam-glass and foamed materials production
-
(Science for glass production)
-
Are the data of physical and chemical studies of flasks given? chemical, phase and granulometric composition, degree of crystallinity, as well as their thermal stability in the temperature range of 90 ...
-
5.
Rigid spheres close packing models and possibilities of their use for development of promising ceramics and refractories (review)
-
(Science for ceramic production)
-
An overview of the current state of theoretical studies of close-packed systems of hard spheres is presented. A description of the main models of regular and random dense packings of rigid spheres is given. ...
-
6.
Production of high-density bitstone powders for alumina-based ceramics sintering
-
(Science for ceramic production)
-
The results of theoretical and experimental studies of methods for obtaining powder fillings with a relative density of more than 0.50 for subsequent sintering of samples of high-density ceramics based ...
-
7.
Sol-gel synthesis of anti-reflection mesoporous silica-based coat-ings
-
(Science for glass production)
-
The results of the synthesis of antireflection mesoporous coatings based on silicon dioxide obtained by acid hydrolysis of tetraethoxysilane (TEOS) in the presence of organic additives are presented. Investigations ...
-
8.
Use of amorphous silica rocks (gaizes) in production of foamglass with reduced sponging temperature
-
(Science for glass production)
-
Informational data on the use of amorphous siliceous rocks for the production of foam glass, as well as the results of laboratory studies on the study of the dependence of the foaming temperature on the ...
-
9.
Mechano-chemical activation of sand in AGO-2 centrifugal planetary mill
-
(Science for glass production)
-
The effect of mechanical dispersion on quartz sand using a centrifugal planetary mill AGO-2 has been investigated. It is shown that at a constant grinding time, but at different intensities of action in ...
-
10.
Aspects of energotechnological combination for recovery of secondary energy resources from kilns
-
(Energy saving)
-
The possibility of creating an energy-technological unit on the basis of a kiln for a more complete use of the resulting secondary energy resources, as well as the feasibility of using an exergy method ...
-
11.
The use of fine-dispersed mixture of SiO2 + Sе as a colorant in tinted glass production
-
(Science for glass production)
-
A dye based on selenium obtained by converting it into micro- and nanostates by the method of mechanical dispersion with the use of the main component of the glass batch, quartz sand, as a matrix-stabilizer, ...
-
12.
Synthetic raw materials for float glass production
-
(Science for glass production)
-
The prospects of replacing the traditional charge with a charge containing synthetic raw materials (SSM) or entirely consisting of SSM are shown. This will allow saving raw materials and fuel and energy ...
-
13.
Glass modified with Ti coatings
-
(Science for glass production)
-
The results of studies of glasses with modified titanium coatings are presented. It has been found that by treating glasses with coatings containing titanium nitride, it is possible to obtain a modified ...
-
14.
The effect of non-traditional additives on silicate-and glass formation processes
-
(Science for glass production)
-
The results of studying the effect of unconventional additives - powders of aluminum and zinc metals - on the processes of silicate and glass formation using the method of polythermy and thermogravimetric ...
-
15.
Special features of depositing functional coatings upon float-glass production
-
(Science for glass production)
-
The features, advantages and technological parameters of obtaining reflective and low-emission glasses by pyrolytic methods during the production of float glass are considered. Tab. 1, bibliography: 2 ...
-
16.
Synthesis direction of Dekorit opacified glass
-
(Science for glass production)
-
The results of studies of the effect of grain size composition, specific surface area of ??the introduced metals, charge preparation modes, as well as temperature-time conditions of synthesis, the nature ...
-
17.
At the threshold of the exhibition Porcelain. Ceramics. Glass-2001
-
(Information)
-
-
18.
Heat-absorbing glass: pathways of synthesis
-
(Science for glass production)
-
The process of obtaining light and heat absorbing glasses of a wide color gamut is considered. The scheme of interaction of various color centers associated with Se, CoO, FeO, Fe 2 O and their combinations ...
