-
1.
Thermodynamic analysis as a method for choosing dopants in silicon carbide ceramics production
-
(Science for ceramic production)
-
Abraham T. Powder Market Update: Nanoceramic Applications Emerge // Am. Cer. Soc. Bull. 2004. V. 83. N 8. P. 23.
Toropov N. A., Barzakovsky V. P., Lapin V. V., Kurtseva N. N. State diagrams of silicate ...
-
2.
Designing particularities of the dosing-mixing lines dust-exhaust systems
-
(Equipment)
-
The features of the design of the aspiration system for dosing and mixing lines are considered and various technical solutions are presented that increase the efficiency of the joint operation of aspiration ...
-
3.
Features of using vibratory feeders with
unbalanced electric drive for dosing of crumbling components of the glass charge
-
(Automation and mechanization of production)
-
The features of using vibrating feeders with an unbalanced electric drive for dosing bulk components of a glass batch are considered. Designs of vibrating feeders are presented that exclude the influence ...
-
4.
Criteria of choosing clayey raw for production of aluminum silicate proppants
-
(Raw materials)
-
The possibility of using kaolins of the Ural-Siberian region in the technology of ceramic proppants has been investigated. The main selection criteria and physicochemical principles of using clay raw materials ...
-
5.
Special features of dosing and mixing of small components of the glass batch
-
(Automation and mechanization of production)
-
The features of dosing of glass melt decolorizers and preparation of premixes with various fillers (sand, soda, feldspar) on their basis are considered. An algorithm for dosing Se and CoO is proposed, ...
-
6.
Increase in the accuracy of weigh hopper dosing and elimination of gumming on the functional surfaces of the equipment
-
(Automation and mechanization of production)
-
It is shown that the equipment of weighing hoppers-batchers with anti-sticking lining plates makes it possible to increase not only the accuracy of material dosing and equipment productivity, but also ...
-
7.
Improving of dosing of the low content components of the glass mixture
-
(Automation and mechanization of production)
-
The design and principle of operation of screw feeders for small components of the glass batch and a dosage-mixing complex for preparing a preliminary mixture of selenium and cobalt oxide with a filler ...
-
8.
RESEARCH OF DOMESTIC BORON CARBIDE POWDERS FOR THE PRODUCTION OF REACTION-BONDED CERAMICS
-
(Not-set)
-
The article discussed the problem of manufacturing boron carbide ceramics with high physical and mechanical characteristics. The problem of choosing raw powders and ceramic manufacturing technology is ...
-
9.
CERAMIC FILTER SYSTEMS FOR INTEGRATED PURIFICATION OF HIGH-TEMPERATURE FLUE GASES FROM GLASS-MELTING FURNACES
-
(Not-set)
-
... an integrated purification train that includes an acid-gas neutralization reactor, reagent-dosing systems (for lime, caustic solution, and ammonia water), an inertial separator, a ceramic catalytic filter ...
-
10.
ROBOT BDTR-500: MODERN SOLUTIONS FOR CRACK DIAGNOSTICS IN TUBES WITH SILICATE-ENAMEL COATING
-
(Not-set)
-
The article presents the successful project of the BDTR-500 robot, designed for diagnosing cracks in pipes with a silicate-enameled coating. Key achievements of the system include the use of GPS navigation ...
-
11.
ASSESSMENT OF THE EFFECT OF LITHIUM CHLORIDE ON THE PROPERTIES OF BOROPHOSPHATE GLASS DURING THE IMMOBILIZATION OF RADIOACTIVE WASTE FROM PYROCHEMICAL PROCESSING OF SPENT NUCLEAR ...
-
(Not-set)
-
The paper presents the results of the studies of a matrix based on borophosphate glass (BFS) with the addition of lithium chloride as a simulator of spent electrolyte, a type of radioactive waste formed ...
-
12.
MORPHOLOGY OF NICKEL AND COBALT OXIDES DEPOSITED ON VARIOUS SUBSTRATES
-
(Not-set)
-
The morphology of nickel and cobalt oxides deposited on various substrates, namely ?-alumina and silica gel, is investigated. The main purpose of the work was to study the effect of synthesis methods, ...
-
13.
PREPARATION OF A COMPOSITE BASED ON HOLLOW GLASS MICROSPHERES MODIFIED WITH SILVER NANOPARTICLES
-
(Not-set)
-
Composite materials based on K 25 hollow glass microspheres were obtained by modifying them with silver nanoparticles obtained by an environmentally friendly “green” method using an aqueous plant extract ...
-
14.
ADVANCED ELECTRIC SPARK FLAW DETECTOR FOR DETECTION OF MICROCRACKS IN SILICATE-ENAMEL-COATED PIPES
-
(Not-set)
-
... are commonly used to improve corrosion resistance, but the identification of subsurface macro-micro cracks remains challenging. Despite the fact that the process
of diagnosing macro cracks on the surface ...
-
15.
FEATURES OF GLASS BATCH PREPARATION IN THE PRODUCTION OF COLORLESS SHEET GLASS WITH INCREASED TRANSPARENCY
-
(Not-set)
-
The features of glass batch preparation in the production colorless sheet glass with increased transparency are considered. A non-standard algorithm for dosing and loading selenium, cobalt oxide, erbium ...
-
16.
CHARACTERISTICS OF GLASSES IN PRODUCTS OF EXPERIMENTAL MODELING OF IMPACT MELTS
-
(Not-set)
-
The transformation of substances under extremely high pressures and temperatures is an actual direction both in the field of solid state physics and materials science, and for natural objects. Among the ...
-
17.
INVESTIGATION OF THE STRUCTURAL ADSORPTION PROPERTIES OF A COMPOSITE BASED ON MOLYBDENUM NANOPARTICLES IN A ZEOLITE MATRIX
-
(Not-set)
-
The results of the study of the structure and adsorption properties of the Mo/zeolite composite obtained by enriching the zeolite of the Chuguevsky deposit of Primorsky Krai with Mo nanoparticles followed ...
-
18.
The Construction of Catalysts on the Basis of Ti Nanoparticles Encapsulated in Zeolite Supporter
-
(Not-set)
-
The object of the study is the Ti/zeolite composite based on the raw zeolite materials from the Kulikovskoye deposit in Amur Region. The aim of the research is design of catalysts on the basis of zeolite ...
-
19.
Investigation of Different SiC-Whiskers Amount on the Properties of Spark Plasma Sintering Ceramic Composite Material
-
(Not-set)
-
The effect of the content of silicon carbide whiskers and the sintering temperature on the physicomechanical and thermophysical properties of samples of a ceramic composite material (CMC) of the SiC & ...
-
20.
Using of Qualitatively Improved Expanded Perlite
-
(Not-set)
-
A comparative analysis of the physical and technical properties of existing and proposed perlite thermal insulation products, agricultural components, acoustic fillings, demonstrating a significant improvement ...
