-
1.
CONTROL OF MECHANICAL STRENGTH OF SAFETY GLASSES FOR GROUND TRANSPORTATION DURING THEIR PRODUCTION PROCESS
-
(Not-set)
-
The article describes the study of the effect of the tempering mode on the mechanical strength of products. It shows the effect of the press settings and the temperature in the tunnel furnace chambers ...
-
2.
INFLUENCE OF TECHNOLOGICAL PARAMETERS OF THE FLOAT PROCESS ON THE ADHESION OF TIN OXIDES TO SHEET GLASS
-
(Not-set)
-
The influence of the operating mode of the float bath on the adhesion of tin oxides to the lower surface of the produced glass ribbon was studied. Statistical analysis of the experimental data and modeling ...
-
3.
THE ROLE OF IRON OXIDES IN THE PRODUCTION OF FLOAT GLASS
-
(Not-set)
-
A statistical analysis of the relationship of the redox ratio of the produced float glass with the technological mode of cooking, the charge content and the chemical composition of the glass was carried ...
-
4.
IMPROVING THE QUALITY OF SAFE TEMPERED GLASS IN THE PRODUCTION PROCESS
-
(Not-set)
-
Selective control of the tempered glasses produced was carried out. Deviations of bent products from a given shape are revealed. Linear adaptive models describing the dependence of the shape of products ...
-
5.
Improving the Quality of Multilayer Glasses in the Production Process
-
(Not-set)
-
Selective quality control of the produced multilayer windshields was carried out. Deviations of bent products from the specified shape are revealed. Linear regression models describing the dependence of ...
-
6.
Information Analysis of the Coefficient of Use of Flat Glass in Production
-
(Not-set)
-
An informational analysis of the yield of suitable glass in the production process has been carried out. The influence of waste from individual production stages on the utilization rate of glass is shown. ...
-
7.
Automation of Quality Control Laminated Glass in the Production Process
-
(Glass production automation)
-
A selective quality control of the produced multilayer windshields during their bending was carried out. Deviations of the parameters of products from the requirements of technical conditions are revealed. ...
-
8.
Challenges of implementing digital economics in Russia glass plants
-
(Efficiency and quality)
-
The aspects of digitalization of the economy of glass production are considered. The influence of digitalization on the emergence of new and change in existing business models is shown. Thanks to the modernization ...
-
9.
Mathematical simulation of temperature field dynamics in complex shaped glassware annealing
-
(Science for glass production)
-
Mathematical models of the dynamics of temperature fields during annealing of glassware of complex configuration are presented on the example of container glass of cylindrical-conical and prismatic-cylindrical ...
-
10.
Glass moulding process control in automobile windshields production
-
(Science for glass production)
-
A selective quality control of the produced multilayer windshields during their bending was carried out. Deviations of the magnitude of surface tensile stresses in the edge of the glass from the requirements ...
-
11.
Annealing process control in production of flat glass by float-method
-
(Science for glass production)
-
A mathematical model has been developed on fuzzy sets, which describes the dependence of residual stresses in sheet glass on the annealing mode. An adaptive control system for glass annealing is proposed ...
-
12.
Computer-aided control of automobile glass quenching
-
(Growth of the production efficiency)
-
A mathematical model has been developed on fuzzy sets, which describes the dependence of the deviation of the shape of bent automobile glasses on the tempering mode. An adaptive algorithm for controlling ...
-
13.
An efficient float process control of making flat glass
-
(Efficiency and quality)
-
The results of simulation modeling of the technological process control for the production of sheet glass by the float method are presented. the effectiveness of a systematic approach to management is ...
-
14.
The use of statistical analysis methods in regulating the process of glass batch preparation
-
(Efficiency and quality)
-
Some methods of statistical analysis used to control the quality of glass batch are considered, and factors influencing its temperature and humidity are determined. An assessment of the accuracy of the ...
-
15.
The systematic approach to controlling the technological process of glass production
-
(Science for glass production)
-
A systematic approach to managing the technological process of sheet glass production is presented, which comprehensively solves the problems of managing the quality of the produced glass, economical use ...
-
16.
Control of a float glass annealing
-
(Efficiency and quality)
-
Models based on neural networks, describing the process of annealing a moving strip of sheet glass in a tunnel oven, have been developed. The problem of annealing temperature control is formulated. Simulation ...
-
17.
Quality management system at the batch preparation shop
-
(Problems of quality)
-
The process model of batch preparation and the role of the quality management system in improving product quality are considered. Il. 3, bibliography: 1 title.
-
18.
Consulting management systems in occupational-and job safety at glass-work
-
(Job safety)
-
The consulting of the management system in the field of occupational safety and labor protection is considered on the example of JSC "Borsky glass plant". Il. 2, bibliography: 5 titles.
-
19.
Simulation of environmental control system for batch preparation plant
-
(Environmental protection)
-
The process model of the environmental control system of the charge preparation shop is considered. Il. 2.
-
20.
The effect of the batch preparation technology on the batch
-
(Quality and management)
-
The quality of the batch preparation process is assessed by determining the properties of the produced sheet glass. Statistical research methods were used. Tab. 1, ill. 4, bibliography: 1 title.
