-
1.
BENTONITE AS THE BASIS OF A GEOPOLYMER BINDER
-
(Not-set)
-
The physicochemical characteristics of the commercial bentonite S-4205-02 (Bentovin), as well as its structural parameters, are given. Clay agglomerates were mainly up to 10…20 ?m in size. X-ray spectral ...
-
2.
APPLICATION FEATURES OF GLASS-CERAMIC SO-115M IN MANUFACTURING OF OPTICAL PARTS FOR RING He-Ne-LASERS
-
(Not-set)
-
The results of an investigations into the effect of filamentous striae with birefringence from 3 to 15 nm/cm in SO-115M glass-ceramic on the manufacturing quality of optical parts for ring lasers and the ...
-
3.
COLLOID-CHEMICAL PROPERTIES OF KAOLIN ZHURAVLINY LOG SUSPENSIONS
-
(Not-set)
-
Dispersion characteristics of the Zhuravliny Log kaolin, zeta potential, and apparent viscosity of its suspensions were studied. Kaolin suspensions had rather high stability due to the negative charge ...
-
4.
The Periclase Sintering on the Brucite Alumophosphate Binder
-
(Not-set)
-
The kinetics of sintering of periclase with a brucitaluminophosphate bond has been studied. To determine the kinetic parameters, a model was used that takes into account the role of physical compaction ...
-
5.
Glass Silica Based on Ferrous Quartzite Kursk Magnetic Anomaly Enrichment Waste and Glass Household Waste
-
(Not-set)
-
A technology has been developed for the production of glass-silica based on the wastes of enrichment of ferruginous quartzites of the Kursk Magnetic Anomaly (KMA) of the Lebedinsky GOK and fractionated ...
-
6.
Electrospinning Formation of Zirconia Fibers
-
(Not-set)
-
The possibility of obtaining ceramic fibers of zirconium oxide by electrospinning is considered. The factors influencing the fiber diameter and the presence of tape inclusions have been established. It ...
-
7.
Production Technology of Ceramic Materials for Hydrocylones Liner
-
(Not-set)
-
The development of effective ceramic lining materials is an important industry challenge. Alumophosphate binder materials may be considered new for hydrocyclone applications. This work is devoted to the ...
-
8.
Analysis of Technological and Economic Expediency of Applying Additive Technologies in Manufacturing of Ceramic Parts
-
(Science for ceramic production)
-
An experience of manufacturing a complex ceramic part using the additive technology LCM (Lithography-based Ceramic Manufacturing) and an analysis of the economic feasibility of its use in serial and pilot ...
-
9.
The Cobalt Spinel Synthesis: the Effect of a Mechanical Activation and Magnesium/Zinc Ions Doping
-
(Coatings)
-
Thermal analysis was used to study the behavior of various cobalt oxides (CoO, Co 2 O 3 and Co 3 O 4 ) when heated. At 200 - 850 & # 176; C Co 2 O 3 gradually passed into Co 3 O 4 , which ...
-
10.
Additive techniques for ceramics manufacturing
-
(Science for ceramic production)
-
A review of publications devoted to additive technologies used in the production of ceramic products is presented. Methods for molding articles from sedimentation-resistant systems are described in most ...
-
11.
Computer experiment on models for mechanical strain field dynamics in complex-shape glass items during annealing
-
(Science for glass production)
-
Mathematical models of the dynamics of mechanical stress fields in glassware of complex configuration of cylindrical-conical and prismatic-cylindrical type have been developed. On the basis of the obtained ...
-
12.
Mathematical simulation of temperature field dynamics in complex shaped glassware annealing
-
(Science for glass production)
-
Mathematical models of the dynamics of temperature fields during annealing of glassware of complex configuration are presented on the example of container glass of cylindrical-conical and prismatic-cylindrical ...
-
13.
Studies in polyfunctional composite silicate materials prosessing. Education and training for construction matrials industry
-
(Science for glass and ceramic production)
-
To the 110th anniversary of the South Russian State Polytechnic University (NPI) named after M.I. Platova. The history of education, the types of activities of the department? General chemistry and technology ...
-
14.
Marnetic separation of raw materials for glass and ceramics production. Aspects of ferrous impurities control
-
(Raw materials)
-
Numerous data on the magnetic separation of raw materials for the production of glass and ceramics are summarized with an additional key indicator - the separation efficiency (relative decrease in the ...
-
15.
Thermodynamic Substantiation of the Mechanism of Solid-Phase Transformations in Roasting of Light-Color Ceramic Bricks
-
(Science for ceramic production)
-
The results of thermodynamic modeling of solid-phase processes occurring during the firing of volumetric light-colored ceramic bricks obtained on the basis of refractory clay and artificial flux are presented. ...
-
16.
Luminescence characteristics of alkali borate glass
-
(Science for glass production)
-
The luminescence of alkaline borate glasses with the composition Li 2 O - B 2 O 3 and Na 2 O has been studied by pulsed cathodoluminescence. - B 2 O 3 . The results obtained are compared with ...
-
17.
The effect of the redox potential on the susceptibility of glass to bubble nucleation
-
(Science for glass production)
-
The processes of glass clarification are closely related to its redox potential, for the quantitative assessment of which an indicator indicator was used - the proportion of ferrous iron, proportional ...
-
18.
Control of the stress-strain state of building glass stone
-
(Science for glass production)
-
On the basis of the polariscope-polarimeter, a device has been developed for monitoring residual stresses in building glass blocks, which makes it possible to automate the process of measuring residual ...
-
19.
Application of magnetic separation to production of electrocast refractories
-
(Efficiency and quality)
-
It is shown that the magnetic enrichment of crushed secondary bakor raw materials (scrap bakor and factory waste) on a magnetic separator produced by the electromechanical company EMCO made it possible ...
-
20.
Developing of the glass matrix composition of white low-melting enamel for steels
-
(Enamels)
-
Based on R 2 O - B 2 O 3 - Al 2 O 3 - SiO 2 - TiO 2 - P 2 O 5 regions of glass formation of low-melting glass matrices are determined. The dependence of the ability to jam the synthesized ...
