-
1.
CONDUCTIVE PASTES FOR LOW TEMPERATURE CO-FIRED CERAMICS – A REVIEW
-
(Not-set)
-
This article presents a review of the available scientific and technical information on conductive metallization pastes used in the production by low-temperature co-fired ceramic (LTCC) multilayer electronic ...
-
2.
LTCC-RESISTORS
-
(Not-set)
-
In this paper the experience of using regular and specially developed resistive pastes for resistors compatible with LTCC substrates is reviewed. Characteristics of surface, buried, and 3D resistors manufactured ...
-
3.
A NEW ALTERNATIVE SOURCE OF CLAY RAW MATERIALS FOR CERAMIC MATERIALS BASED ON SILT DEPOSITS OF RESERVOIRS
-
(Not-set)
-
The possibility of obtaining a new alternative source of clay raw materials for obtaining ceramic materials based on silt deposits of reservoirs, which has functional properties, is considered. The physicochemical ...
-
4.
THE USE OF GAS CLEANING DUST OF STEELMAKING FURNACES IN THE COMPOSITION OF CERAMIC MASSES
-
(Not-set)
-
The chemical-mineralogical compositions, new formations of crystalline phases of minerals and the main properties of the ceramic mass were studied using iron-containing dust from the gas cleaning of steel-smelting ...
-
5.
HIGH-TEMPERATURE LIGHTWEIGHT ALKALINE-ACTIVATED MATERIALS WITH ADDITION OF MULTI-WALLED CARBON NANOTUBES
-
(Not-set)
-
... waste, multi-walled carbon nanotubes (MWCNT) and air-entraining additive (AEA) after heat treatment at different temperatures. In specimens with АЕА, the density decreases from 1600 to 1240 kg/m3, strength ...
-
6.
Study of the Influence of Nanotechnogenic Raw Materials and Pyrophyllite on Orientation of Clay Particles and Water Permeability of Acid Resistant Materials
-
(Not-set)
-
The use of nanotechnogenic aluminum-containing raw materials and pyrophyllite in the compositions of ceramic masses for the production of acid-resistant materials helps to reduce the shrinkage anisotropy ...
-
7.
Rheological behaviour of ceramic slurries and physic-mechanic properties of acidresistant ceramics made of nanosized petroleum chemistry and non-ferrous metals production industrial waste, and pyrophy
-
(Utilization of waste)
-
A significant effect of the amount of aluminum-containing nanotechnogenic raw materials based on non-ferrous metallurgy and pyrophyllite on the structural and rheological properties of ceramic masses for ...
-
8.
Mixed defoculants of various nature and their influence on cement stone structure and properties
-
(At the enterprises and institutes)
-
The effect of two deflocculants that effectively reduce the viscosity of the cement paste has been investigated. sodium tripolyphosphate (PF) and Castament FS 20 (C1) based on polycarboxylate ether and ...
-
9.
The influence of metallurgical slurries on drying behaviour of ceramic masses for lining brick production
-
(Utilization of waste)
-
The influence of metallurgical slags on the drying properties of ceramic masses has been investigated. It has been experimentally established that the use of fine-grained slag helps to reduce the sensitivity ...
-
10.
The effect of microbiological treatment on the technological properties of clays of different mineral composition
-
(Raw materials)
-
... Bacterial processing of clay raw materials contributes to an increase in its dispersion and plasticity, a decrease in air linear shrinkage and a coefficient of sensitivity to drying, which makes it possible ...
