-
1.
Kovalenko A. F. Methods for pulse laser annealing of non-metal plates
-
(At the enterprises and institutes)
-
Within the framework of the quasi-static problem of thermoelasticity, three methods of pulsed laser annealing of nonmetallic plates are considered. The possibility of reducing the maximum tensile stresses ...
-
2.
EXPERIMENTAL DETERMINATION OF THE SPECIFIC ENERGY OF DESTRUCTION OF SILICON CARBIDE-BASED CERAMICS UNDER THE INFLUENCE OF MILLISECOND LASER RADIATION
-
(Not-set)
-
Experimental studies of the effect of laser radiation with a wavelength of 1.06 ?m on reaction-sintered silicon carbide-based ceramics in the range of power densities corresponding to the mode of advanced ...
-
3.
ASSESSMENT OF THE EFFECT OF THE FLINAK SALT ADDITIVE ON THE PROPERTIES OF BOROPHOSPHATE GLASSES
-
(Not-set)
-
The paper presents the results of the studies of borophosphate glasses containing an additive of the FLiNaK salt, an eutectic mixture of alkali metal fluorides of the composition 46.5 mol. % LiF – 11.5 ...
-
4.
PHASE FORMATION OF NEW PYROCHLORE TYPE CERAMICS Bi2.7Zn0.46Ni0.70Sb2O10 + ?
-
(Not-set)
-
The process of phase formation of new antimony pyrochlore (sp. gr. Fd-3m) Bi2.7Zn0.46Ni0.70Sb2O10 + ? during solid-phase synthesis from oxide precursors was studied. The process of solid-phase synthesis ...
-
5.
CONSIDERATION OF REFLECTION FROM THE BACK SURFACE DURING LASER ANNEALING OF OPTICAL GLASS PLATES WITH HIGH REFRACTIVE INDEX VALUES
-
(Not-set)
-
Within the framework of a quasi-static unrelated thermoelasticity problem, a criterion for the thermal strength of a freely pinched plate during pulsed laser annealing is obtained, taking into account ...
-
6.
CERAMICS WITH ULTRAHIGH PERMITTIVITY VALUES: COMPOSITIONS, SYNTHESIS METHODS AND PROPERTIES AT LOW AND MEDIUM FREQUENCIES
-
(Not-set)
-
An overview of dielectric materials with high (more than 10 000) values of relative permittivity is presented. Most of the compositions of these materials are based on systems that include ferroelectric ...
-
7.
INVESTIGATION OF THE POSSIBILITY OF REDUCING ENERGY COSTS DURING LASER SCRIBING OF GLASS AND CERAMIC PLATES
-
(Not-set)
-
In the framework of the one-dimensional problem of evaporation of the absorbing layer of the material with the “instantaneous” release of laser pulse energy, the possibility of reducing energy costs when ...
-
8.
Pulsed Laser Punching of Holes in Ceramic Parts
-
(Not-set)
-
Within the framework of the theory of developed evaporation of matter under the action of laser radiation, the problem of assessing the strength of ceramic parts of a cylindrical shape during laser punching ...
-
9.
Pulsed Laser Penetration of Through Holes
in Optically Thick Glass and Ceramic Plates
-
(Not-set)
-
Within the framework of the one-dimensional problem of the evaporation of an absorbing layer of matter at For the release of laser pulse energy, analytical relationships are obtained for calculating the ...
-
10.
Nanosecond pulse laser annealing of vitreous and ceramic materials
-
(Materials processing)
-
Within the framework of a dynamic uncoupled problem of thermoelasticity for a half-space, the effect of pulsed laser radiation on glassy and ceramic materials is considered. Analytical relations are obtained, ...
-
11.
Pulse laser annealing of glass plates under partial radiation covering
-
(At the enterprises and institutes)
-
Within the framework of the quasi-static problem of thermoelasticity, the effect of pulsed laser radiation on a plate is considered. An analytical relationship is obtained, which is the condition for the ...
-
12.
Options analysis of pulsed laser penetration of the through holes in vitreous and ceramic plates
-
(At the enterprises and institutes)
-
In the framework of the one-dimensional problem of the evaporation of an absorbing layer of matter at & # 171; instantaneous & # 187; For the release of laser pulse energy, analytical relations are obtained ...
-
13.
The influence of woven mineral fillers chemical nature on polymer composite materials properties
-
(At the enterprises and institutes)
-
The physicomechanical (density, tensile and compressive strength), thermophysical (TCLE) and dielectric (dielectric constant) properties of polymer composite materials based on woven fillers of mineral ...
-
14.
Conditions of high-temperature СО2 laser annealing of KO-3 optical ceramics
-
(Materials processing)
-
Within the framework of a quasi-static uncoupled problem of thermoelasticity for an isotropic plate, non-destructive modes of high-temperature laser annealing of optical ceramics
KO-3 with CO2-laser radiation ...
-
15.
Improvement of space-saving luminous tube lamps
-
(At the enterprises and institutes)
-
The composition of the elements of a compact fluorescent lamp is described. The functions and requirements for the bulb, phosphor layer, electrodes and other parts of the lamp are given. Improved technologies ...
-
16.
Rational schedules for glass and ceramic plates laser treatment
-
(Materials processing)
-
Within the framework of the one-dimensional problem of the evaporation of an absorbing material layer at When the energy of a laser pulse was released, an analytical relationship was obtained for calculating ...
-
17.
Parameters for high-temperature laser annealing of KO-1 and KO-5 optical ceramics with СО2-radiation
-
(Science for glass production)
-
Within the framework of a quasi-static uncoupled problem of thermoelasticity for an isotropic plate, non-destructive modes of high-temperature laser annealing of optical ceramics KO-1 and KO-5 with CO ...
-
18.
Energy-efficient conditions of glass and ceramic materials laser processing
-
(Materials processing)
-
Within the framework of the one-dimensional problem of the evaporation of an absorbing material layer at For the release of laser pulse energy, analytical relationships are obtained for calculating the ...
-
19.
Optimized technique for laser processing of glass and ceramic materials
-
(Materials processing)
-
Within the framework of the one-dimensional problem of the evaporation of an absorbing layer of a material with an "instantaneous" release of laser pulse energy, an analytical relationship is obtained ...
-
20.
Properties of nano-coated glass composite correlated with fabrication process parameters
-
(Coatings)
-
The change in the thickness and refractive index of one-component coatings of the compositions SiO 2 and TiO 2 , deposited from solutions on a float glass substrate, and the light transmission of composites, ...
