-
1.
SOL-GEL SYNTHESIS AND EFFECTS OF NEODYMIUM AND EUROPIUM OXIDES ON THE STRUCTURE FORMATION OF CALCIUM MONOALUMINATE
-
(Not-set)
-
Calcium monoaluminate was synthesized using the sol-gel method and the effect of europium and neodymium oxides on the synthesis and kinetics of structure formation in the temperature range of 500 – 1000 ...
-
2.
Interoperational control of conductive layer formation on nano-fibrous materials surface
-
(At the enterprises and institutes)
-
The coatings on glass witness samples were investigated, which made it possible to record the technological modes of their application, as well as the parameters of the installation: operating current, ...
-
3.
Structural and thermophysical features of complex ceramic oxides in Dy2O3-HfO2 system
-
(Science for ceramic production)
-
The structure and thermophysical properties of materials formed in the Dy 2 O 3 -HfO 2 system (molar ratio from 1: 3 to 3: 1 ) as a result of isothermal roasting of X-ray amorphous mixed hydroxides ...
-
4.
Effect of biofuel combustion products on refractory material phase composition and structure
-
(At the enterprises and institutes)
-
Changes in the phase composition and microstructure of an aluminosilicate refractory material destroyed during its operation in a solid biofuel combustion unit have been investigated. Based on the results ...
-
5.
Engineering ceramics based on potassium polytitanate and titania mixtures
-
(Science for ceramic production)
-
The regularities of the process of interaction of amorphous potassium polytitanate with titanium oxide in the process of firing their mixtures taken with different content of components are investigated. ...
-
6.
Bottom block for glass furnaces: fired articles or concrete?
-
(Refractories for glass production)
-
Comparative studies of the properties of fired fireclay products and products made of low-cement refractory concretes (LCC), fired at different temperatures, and non-fired concretes, used for laying the ...
-
7.
Ceramic membranes for photocatalytic purification of water
-
(Science for ceramic production)
-
The structure and photocatalytic properties of ceramic membranes synthesized on the basis of amorphous potassium polytitanate intercalated with nickel ions have been investigated. It is shown that the ...
-
8.
Unbaked castable refractory phase composition formation at the heating-up service conditions temperature of glassmaking aggregates
-
(Refractories for glass production)
-
Comprehensive studies of the phase composition of refractory concrete compositions, heat-treated in various temperature ranges, including when the glass-melting units are put into operation, have been ...
-
9.
Composites based on the mixtures of potassium polytitanate and biocompatible glasses
-
(Biomaterials)
-
The possibility of synthesizing ceramic composites based on mixtures of powders of two types of biocompatible glasses and potassium polytitanate has been investigated. It is shown that in the course of ...
-
10.
Formation of composite structures in aluminosilicate systems upon introduction of potassium titanates
-
(Science for ceramic production)
-
The regularities of the formation of the structure of composite ceramic materials during reaction firing of raw mixtures, including mixtures of powders of traditional aluminosilicate raw materials (kaolinite) ...
-
11.
Application of IR spectroscopy to the study of structure formation processes in low-cement concretes
-
(Refractories)
-
Optimization of compositions and areas of application of unfired refractory concretes determine the need to study the processes of their structure formation, which take place in the material when the temperature ...
-
12.
Production of refractory concretes and their application in glass melting units
-
(Refractories for glass production)
-
Presented are the refractory concrete products manufactured by the Semiluksk Refractory Plant and refractory masses used in glass-melting units. Their technical characteristics are given - strength, density, ...
-
13.
Thermophysical characteristics of refractory composite materials for glass production
-
(Refractories for glass production)
-
When the lining of large refractory products is brought to the operating mode, it is important to know the temperature rise of the material in order to determine the mounting clearances and to be sure ...
-
14.
Petrography analysis of aluminosilicate refractory concretes
-
(Refractories for glass production)
-
Investigations by the methods of petrography of concrete aluminosilicate materials produced by the Semiluksky refractory plant, on a fireclay filler and an integral binder based on high-alumina cement, ...
-
15.
Petrographic analysis of porous structure of refractory alumosilicate concretes
-
(Refractories for glass production)
-
The results of a petrographic study of the pore structure of chamotte filler, a binder of aluminosilicate refractory concretes and rammed chamotte bar are presented. It has been established that basically ...
-
16.
Main directions in development of refractory materials for glass industry in Russia
-
(Refractories for glass production)
-
The main refractory plants in Russia, which produce refractory products for glass enterprises, and the materials produced by them are presented. The main trends in the development of refractory production ...
-
17.
Color setting in the tint glass
-
(Science for glass production)
-
A technique has been developed for stabilizing the optical characteristics of float glass by adding specially selected dyes to the charge, the amount of which is determined by the difference in light transmission ...
-
18.
Development of the composition of the refractory composites for glass production
-
(Refractories for glass production)
-
Semiluki Refractory Plant produces refractories using concrete technology and develops and improves compositions and technology for manufacturing large-sized products by vibrocasting. The Saratov Institute ...
-
19.
Special service features of the float-bath refractory lining and performance test of novel refractory composite materials
-
(Refractories for glass production)
-
To prevent glass defects formed from the lining that breaks down during operation, and to maintain the operable state of the float bath equipment, it is necessary to use high-quality refractory materials, ...
-
20.
Experience of the Saratov Institute for Glass in design of refractories of special duty for float-process
-
(Refractories for glass production)
-
The Saratov Institute of Glass - the developer of the domestic version of the float process by the method of two-stage glass molding - is one of the leading applied institutes in Russia and successfully ...