-
1.
Design of ceramic lining material with self-glazing effect based on stiff clay
-
(Science for ceramic production)
-
The composition of the charge for facing ceramics based on low-plasticity clay with an additive containing boric acid and lithium carbonate as fluids, as well as titanium dioxide as a hardening additive ...
-
2.
Heat-resistant thermal insulation products based on aluminosilicate fiber experience of usage in the lining of thermal units of ceramic industry
-
(Industrial experience. Energy saving.)
-
The structure and properties of the developed high-alumina products based on aluminosilicate fiber are shown. The application of the developed NK-29 products in the lining of high-temperature thermal units ...
-
3.
The influence of metallurgical slurries on drying behaviour of ceramic masses for lining brick production
-
(Utilization of waste)
-
The influence of metallurgical slags on the drying properties of ceramic masses has been investigated. It has been experimentally established that the use of fine-grained slag helps to reduce the sensitivity ...
-
4.
Basalts and granitoid solids as mass constituents for ceramic internal lining tiles
-
(Science for ceramic production)
-
Basalt and granitoid rocks have been investigated as components of raw materials for producing ceramic tiles for interior wall cladding. The combined introduction of granitoids and basalts contributes ...
-
5.
RESEARCH OF THE DEPENDENCE OF THE THERMAL STRENGTH PROPERTIES OF REFRACTORY MATERIALS OF THE LADLE LINING OF THE FERROALLOY PRODUCTION ON TEMPERATURE
-
(Not-set)
-
The article is devoted to the study of the dependence of the change in compressive strength on temperature for refractory materials of the lining of a pouring ladle of ferroalloy production – fireclay ...
-
6.
CERAMIC COMPOSITE MATERIALS IN THE Ca2P2O7–Ca3(PO4)2 SYSTEM BASED ON POWDER MIXTURES INCLUDING CALCIUM PHOSPHATE OF NATURAL ORIGIN AND MONOCALCIUM PHOSPHATE MONOHYDRATE
-
(Not-set)
-
Ceramics in the Ca2P2O7–Ca3(PO4)2 system were obtained from powder mixtures containing calcium hydroxyapatite Са10(РО4)6(ОН)2 of natural origin and monocalcium phosphate monohydrate Ca(H2PO4)2·H2O. Fish ...
-
7.
The Phase Composition and Physico-Mechanical Properties at Different Temperatures of Ceramic Firing Earthquake-Resistant Bricks Using Ferroli
-
(Not-set)
-
Ceramic bricks based on low-melting clay and ferro-dust were obtained from self-decaying slags of low-carbon ferrochrome in the temperature range 950 - 1100 ° C, which have grades from M100 to M175, respectively. ...
-
8.
Production Technology of Ceramic Materials for Hydrocylones Liner
-
(Not-set)
-
The development of effective ceramic lining materials is an important industry challenge. Alumophosphate binder materials may be considered new for hydrocyclone applications. This work is devoted to the ...
-
9.
Ceramic tiles made with phosphorus slags
-
(Utilization of waste)
-
Compositions, technological parameters of ceramic products for internal lining, obtained using phosphonic slag, refractory and bentonite clays, are given. The chemical and mineralogical composition of ...
-
10.
Effect of ceramic coatings on sound absorbing properties of heat-protective materials
-
(Coatings)
-
Ceramic coatings for heat and sound absorbing materials, a technological scheme for the manufacture, application and formation of ceramic coatings have been developed, which makes it possible to obtain ...
-
11.
Effect of Phase Composition on the Endurance of the Ceramic Facing of the Samarkand Shakhi-Zinda Ensemble
-
(At the enterprises and institutes)
-
It was determined by X-ray phase and electron microscopic methods of analysis that wollastonite and anorthite give the strength properties to the ceramic facings of the Shakhi-Zinda ensemble. In addition, ...
-
12.
Effective lining of tunnel kiln cars made of aluminosilicate ceramoconcretes
-
(At the enterprises and institutes)
-
On the basis of aluminosilicate ceramic concrete, a lining for trolleys used in ceramic kilns has been developed and introduced. The first trolleys with such a lining have already passed over 50 cycles. ...
-
13.
Porous ceramics obtained from strontium zirconate
-
(Science for ceramic production)
-
Porous ceramics were obtained from strontium zirconate synthesized from zirconium dioxide TsRO-2 and baddeleyite powder PB-1 and strontium carbonate using a burnout additive - bead polystyrene. The possibility ...
-
14.
FACING BUILDING MATERIAL BASED ON CULLET MODIFIED WITH POTASSIUM HYDROXIDE
-
(Not-set)
-
The technology of facing material based on mechanically activated cullet modified with potassium hydroxides has been developed. The phase composition, macro- and microstructure of the lining material are ...
-
15.
FACING BUILDING MATERIAL BASED ON MECHANICALLY ACTIVATED CULLET MODIFIED WITH SODIUM HYDROXIDE
-
(Not-set)
-
The technology of facing material based on mechanically activated cullet modified with sodium hydroxides has been developed. The phase composition, macro- and microstructure of the lining material are ...
-
16.
SINTERING PROCESSES AND SOLID-PHASE REACTIONS IN THE TRIPLE COMPOSITION “QUARTZITE–CLAY–ADDITIVES”
-
(Not-set)
-
The article presents the results of a physicochemical study of the process of high-temperature sintering and solid-phase reactions in a ternary composition based on Koitash quartzite, Angren clay and Karakhtaisky ...
-
17.
Experimental Studies for
Prototype Manufacturing of Flame Tube Cladding Elements Pro-duced from Composite Material
-
(Not-set)
-
The results of experimental studies on the manufacture of prototypes of the elements of the lining of the flame tube of the combustion chamber from a ceramic composite material are presented, the structure ...
-
18.
& # 171; NPO MEGATEK & # 187; 15 YEARS WORKING FOR YOU
-
(Jubilee)
-
Currently, the developed & # 171; NPO MEGATEK & # 187; eight grades of ceramic materials for the repair of the main types of refractory lining of high-temperature industrial furnaces (dinas, chamotte, ...
-
19.
Characteristics of heat transfer through glass-melting tank walls
-
(Science for glass production)
-
A technique has been developed for the engineering calculation of the thermal resistance of the wall layer of glass, which allows, by taking into account the physical nature of the heat transfer process ...
-
20.
Thermal performance of diatomite-based materials in a broad temperature range
-
(Coatings)
-
The dependences of the ultimate strength in compression of diatomite on temperature in the temperature range of 50 - 700 ° C are investigated. The ultimate strength in compression at a temperature of 450 ...
