-
1.
JOINT PROCESSING OF QUARTZ-LEUCOXENE CONCENTRATE AND BRUCITE CONTAINING WASTE FROM THE PRODUCTION OF REFRACTORY MATERIALS TO OBTAIN COMPLEX COAGULANTS
-
(Not-set)
-
The volumes of large-tonnage mineral waste generation cause serious concern from the side of environmental supervision. Most of the mineral waste is a valuable secondary raw material, but the lack of integrated ...
-
2.
INVESTIGATION OF THE INTERACTION OF LEAD-SILICATE GLASSES WITH BARIUM HYDROXIDE
-
(Not-set)
-
... It is proposed in the production technology of electric vacuum devices, where lead-silicate glasses are used, to use washing with barite water for rapid coagulation of silica gel, which eliminates the ...
-
3.
Plasma Technology for the Production of Glass
Pellets Based on Waste from the Enrichment of Ferruginous Quartzite KMA
-
(Not-set)
-
... 1.5 to 2.5 m3 / h and the current strength from 400 to 500 A due to the processes of coagulation, the amount of the fraction over 630 ?m increases. It has been shown that glass microspheres are enriched ...
-
4.
Preparation of Highly Porous Materials Based on Refractory Clays
-
(Not-set)
-
Made porous ceramics based on clay and non-plastic aluminosilicate raw materials of Uzbekistan by slip casting. Molding was carried out using a blowing agent - technical foam and sawdust, stabilizing the ...
-
5.
Improving Technology of Ceramic High-Porous Permeable Cellular Materials
-
(Science for ceramic production)
-
... slip is 1 ... 3 & # 37 ;. It has been experimentally established that corundum suspensions with such a ratio of the dispersed phase and the dispersion medium are coagulation structures with a characteristic ...
-
6.
Rheological behaviour of alumina slurries
-
(Science for ceramic production)
-
... of ceramic materials. The ranges of the ratios of the solid (sintered powders) and liquid (technological binder) phases have been determined, at which coagulation and direct contacts are formed in the ...
-
7.
Solid surface wetting with dopant solutions
-
(At the enterprises and institutes)
-
The results of studies of the effect of a complex additive containing sodium tripolyphosphate and a resorcinolfurfural oligomer on the processes of wetting hard surfaces are presented. It is shown that ...
-
8.
Structure formation behaviour in sanitaryware slurries
-
(Science for ceramic production)
-
The features of the coagulation structure and technological properties of slip masses for casting ceramics on stands in gypsum molds and under external pressure in polymer molds are shown. The compositions ...
-
9.
Features of deformation and fracture of polycrystalline oxide ceramics at temperatures up to 1600 °C
-
(Science for ceramic production)
-
... apparently, as a result of the formation of vacancies in areas of the stretched zone, confined to the boundaries of the crystals, and then their coagulation at the boundaries. The course of the processes ...
-
10.
Morphological approach to optimization of the molding compound properties for extrusion (review)
-
(Science for ceramic production)
-
... such parameters as the ratio of deformations, the relaxation period, the power for the destruction of the coagulation structure, and the flow index. For extrusion, masses with developed plastic properties ...
-
11.
The effect of microorganizms on the properties of porcelain masses upon maturing
-
(Science for ceramic production)
-
... shown that when a nutrient substrate is added to the porcelain mass, the vital activity of the natural microflora is stimulated, which is accompanied by a favorable change in the coagulation, condensation ...
