-
1.
General information
-
... AND GLAZES;
STONE CASTING;
MINERAL WOOL;
OTHER INORGANIC FIRING NEW AND TRADITIONAL MATERIALS.
AREAS OF USE:
building; common consumption goods; chemistry; metallurgy; electronics and electrical engineering; the ...
-
2.
About this journal
-
... technical, structural, superconducting and other types of special ceramics);
SITALLS AND GLASS CERAMICS;
fiberglass;
ENAMELS AND GLAZES;
STONE CASTING;
MINERAL WOOL;
OTHER INORGANIC FIRING NEW AND TRADITIONAL ...
-
3.
Development and testing of the mathematical model of the tunnel kiln for brick firing
-
(At the enterprises and institutes)
-
A mathematical model is considered, with the help of which technological parameters are maintained in real time, depending on the amount of bricks produced. Il. 2.
-
4.
Modeling of temperature fields in glass articles upon their firing
-
(Science for glass production)
-
Methods for calculating temperature fields in flat and cylindrical glassware are considered. The advantages of numerical methods for calculating temperature fields in comparison with analytical methods ...
-
5.
Computer experiment on models for mechanical strain field dynamics in complex-shape glass items during annealing
-
(Science for glass production)
-
Mathematical models of the dynamics of mechanical stress fields in glassware of complex configuration of cylindrical-conical and prismatic-cylindrical type have been developed. On the basis of the obtained ...
-
6.
Trivalent chromium ions luminescence in mullite at kaolin firing
-
(Science for ceramic production)
-
The luminescence spectra of samples of baked kaolin are investigated. It is shown that the obtained radiation corresponds to the luminescence of Cr 3+ ions in mullite. The effect of the firing temperature ...
-
7.
Glassenamels firing with concentrated solar power
-
(At the enterprises and institutes)
-
The possibilities of using concentrated solar energy to create a light-emitting technology for producing art items with glass enamel are considered. Calculations have been carried out to select the optimal ...
-
8.
Simulation of optimized firing conditions for zirconia and alumina-based ceramics
-
(Science for ceramic production)
-
An approach to the production of ceramics in the ZrO 2 - Al 2 O 3 system with high physical and mechanical properties and a low sintering temperature, based on theoretically calculated optimal firing ...
-
9.
Structure and rheology of semi-finished porcelain upon firing
-
(Science for ceramic production)
-
Data on the rheological behavior of samples of materials of the porcelain group at pure shear were obtained, complementing the results of dilatometric studies of shrinkage. The concept of the macromechanism ...
-
10.
Modern electric furnaces for heat treatment of ceramic article and fancy glass
-
(At the enterprises and institutes)
-
The "Termix" enterprise produces electric furnaces of a new generation for bending and fusing glass, as well as for drying and firing ceramic products. During the entire period of heat treatment ...
-
11.
Cause-effect relation of the spoilage upon brick firing in tunnel kilns
-
(At the enterprises and institutes)
-
... determined. With existing gas burner devices, the requirements for high-speed firing modes cannot be met. It is necessary to modernize the furnace: replacement of Vulcan-Gas gas burners with burners of ...
-
12.
Pore formation upon firing of granulated mineral raw materials
-
(At the enterprises and institutes)
-
Based on the regularity of the growth of gas bubbles, crystallization of metals, topochemical reactions of decomposition of solids, the kinetic equation of pore formation during the firing of granules ...
-
13.
Prediction of water absorption in nonglazed tiles of semidry molding using regression model
-
(Science for ceramic production)
-
The possibility of predicting water absorption in the production of semi-dry pressing ceramic tiles by using data on the linear dimensions of the pressed tiles and their firing modes has been investigated. ...
-
14.
LTCC-RESISTORS
-
(Not-set)
-
In this paper the experience of using regular and specially developed resistive pastes for resistors compatible with LTCC substrates is reviewed. Characteristics of surface, buried, and 3D resistors manufactured ...
-
15.
DEVELOPMENT OF TECHNOLOGY FOR THE SYNTHESIS OF HEAT-INSULATING GLASS-CRYSTALLINE MATERIALS BASED ON DRILLING MUD BY HYDRATE FOAMING
-
(Not-set)
-
... thermal insulation materials. A series of raw materials for synthesizing sludge, as well as temperature and time modes of firing, were developed. A study of the physical and chemical properties of the ...
-
16.
INVESTIGATION OF PROPERTIES OF CLINKER CERAMICS USING ALBITOPHIR ADDITIVE OF VARIOUS FRACTIONS
-
(Not-set)
-
... achievement of characteristics corresponding to clinker ceramics. This article discloses the relationship between the composition of the raw components of ceramics, their granulometric composition, firing ...
-
17.
SYNTHESIS OF MULLITE-SILICA CERAMICS WITH ENHANCED ELECTROPHYSICAL PROPERTIES
-
(Not-set)
-
... of thermal processes during firing, as well as X-ray phase analysis for phase identification were used for the analysis. It is shown that the choice of the optimal temperature regime and preliminary mechanical ...
-
18.
FIREСLAY CRUCIBLES WITH IMPROVED PROPERTIES FOR ORE ASSAY ANALYSIS
-
(Not-set)
-
... the samples increases to 8 thermal cycles. At the same time, the amount of mullite formed after firing at 1420 ?C increases noticeably. The research promotes the use of local materials and recycling of ...
-
19.
DEVELOPMENT OF CERAMIC BRICK COMPOSITIONS FOR RESTORATION OF HISTORICAL HERITAGES BASED ON LOESS–DEFECATE COMPOSITION
-
(Not-set)
-
... the study of physical and chemical processes during firing with the introduction of amorphous silica and calcium-containing waste as a defecate in the brick mass. Technological firing modes have been determined. ...
-
20.
PROPERTIES OF POWDERS SYNTHESIZED FROM AQUEOUS SOLUTIONS OF SODIUM SILICATE AND IRON SULFATE
-
(Not-set)
-
... of the synthesized powder in distilled water included only an X-ray amorphous product.
After firing in air in the range of 400…1200 ?C, hematite Fe2O3 and cristobalite SiO2 were found in powder samples ...
