-
1.
Physical-Chemical Research of Glazed Ceramics of Kyrgyzstan X ? XVI Centuries
-
(Not-set)
-
An experience of physical and chemical analysis of some fragments of medieval glazed ceramics, discovered at different times in the area of ??medieval settlements located in the Chui, Talas and Kochkor ...
-
2.
Glazed wall ceramics exhibiting improved physicomechanical and decorative properties
-
(Science for ceramic production)
-
A technology has been developed for glazing wall ceramics by preliminary flashing of dried unfired products with a plasma torch with their subsequent firing. Tab. 1, bibliography: 9 titles.
-
3.
EFFECT OF SURFACE GLAZE TREATMENT AND MECHANICAL POLISHING ON THE COLOR STABILITY OF TWO TYPES OF CAD/CAM CERAMICS
-
(Not-set)
-
... changes (P < 0.001). After glazing and mechanical polishing, LDS exhibited considerably less color change in both groups than ZLS. In both types of ceramics, the glazed group experienced less color variation ...
-
4.
MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF OPAQUE CERAMIC TILES GLAZED WITH SOME INDUSTRIAL WASTES
-
(Not-set)
-
The primary goal of this research is to determine the mechanical properties of opaque glazed ceramic tiles containing fly ash, tincal waste, and recycled red clay, including to assess if the results meet ...
-
5.
SUSTAINABLE DEVELOPMENT OF SHOUSHAN STONE WASTE IN GLAZE MATERIALS: STUDY ON COLORATION MECHANISM AND DURABILITY
-
(Not-set)
-
This study focuses on the sustainable utilization of shoushan stone mineral processing waste in glaze materials, exploring its synergistic effects on regulating the coloration mechanism and optimizing ...
-
6.
STUDY ON THE FIRING TECHNOLOGY AND INFLUENCING FACTORS OF COPPER-BASED GREEN GLAZE IN JUN PORCELAIN IN CERAMIC INDUSTRIAL PRODUCTION
-
(Not-set)
-
Cu-series green glaze was prepared using raw materials such as kaolin, feldspar, calcite, talc, limestone, quartz, and copper oxide. This study investigated the effects of formulation composition and preparation ...
-
7.
PHYSICAL AND MECHANICAL PROPERTIES OF CERAMIC TILE IN THE COMPOSITION CLAY–DUNE SAND
-
(Not-set)
-
The article investigates the physical, mechanical and technological properties of ceramic plates in the composition of Kulatau clay and dune sands of the Tuprakkala massif located in the lower amudarya ...
-
8.
THE POSSIBILITY OF USING WASTE FROM THE ENRICHMENT OF FERRUGINOUS QUARTZITE KMA IN THE PRODUCTION OF CERAMIC BUILDING MATERIALS
-
(Not-set)
-
The possibility of using waste from the enrichment of ferruginous quartzites of KMA is considered. The chemical composition of waste from Lebedinsky GOK has been investigated. It has been established that ...
-
9.
THE USE OF GAS CLEANING DUST OF STEELMAKING FURNACES IN THE COMPOSITION OF CERAMIC MASSES
-
(Not-set)
-
The chemical-mineralogical compositions, new formations of crystalline phases of minerals and the main properties of the ceramic mass were studied using iron-containing dust from the gas cleaning of steel-smelting ...
-
10.
Plasma Technology for the Production of Glass
Pellets Based on Waste from the Enrichment of Ferruginous Quartzite KMA
-
(Not-set)
-
A technology has been developed for producing glass microspheres in a plasma reactor based on the wastes of enrichment of ferruginous quartzites KMA. The regularities of the influence of the flow rate ...
-
11.
The Stress State of the Glass Coating of the Pipe
-
(Not-set)
-
The study of the stress state of the glass coating of a pipe in the petrochemical industry is presented. Formulas are obtained for determining the longitudinal, radial and tangential stresses arising in ...
-
12.
Temperature Coefficient of Linear Expansion of Ceramic Material Based on Color Metallurgy Wastes, Glaze and its Mechanism of Formation During Firing
-
(Utilization of waste)
-
Studies have shown that in order to obtain a glazed ceramic material with increased heat resistance, it is necessary that the value of the TEC for the ceramic material be no more than 1.50 - 1.55 & # 37; ...
-
13.
Interrelation of Structure with Whiteness and Transparency in Soft Porcelain
-
(Science for ceramic production)
-
The structures of two types of soft porcelain (bone china and parian) have been investigated. The features of the structure of these materials are revealed, which determine the combination of pronounced ...
-
14.
Comprehensive assessment of glased porcelain surface state
-
(Science for ceramic production)
-
A comprehensive assessment of the state of the glazed porcelain surface by mechanical and optical means has been carried out. It is shown that both of these tools can be used to assess the quality of the ...
-
15.
Optical control of porcelain firing conditions
-
(Science for ceramic production)
-
It is proposed to control the redox conditions of porcelain firing in sity (& # 171; in place & # 187;) by reflection spectra in the UV-VIS-NIR region. The difference in color characteristics of glazed ...
-
16.
Evaluation of porcelain whiteness and gloss
-
(Science for ceramic production)
-
A specific example shows the effect of firing conditions on the color characteristics and gloss of glazed porcelain surface after firing in a tunnel kiln. The whiteness of glazed porcelain is determined ...
-
17.
Properties of glass-foam material doped with nanosized zirconia
-
(Science for glass production)
-
The effect of small additions of zirconium concentrate with an average particle size of 30 nm on the physical and mechanical properties of foam glass is considered. It was found that the introduction of ...
-
18.
Transparent glazes for high-voltage porcelain
-
(Coatings)
-
The results of the development of compositions of raw material compositions of transparent shiny glaze coatings used for the production of ceramic high-voltage porcelain insulators are presented. The area ...
-
19.
Copper oxide behavior in silicoborate glazy glass
-
(Coatings. Enamels.)
-
Copper-containing glazed glasses in the system B 2 O 3 - SiO 2 - Al 2 O 3 < / sub> - CaO - CuO with a molar content of copper oxide from 5 to 25%, introduced during the synthesis of glasses. Glasses ...
-
20.
Chemical stability of Zn-containing glaze for quartz glass ceramic
-
(Science for glass production)
-
... and acid resistance of the glaze exceeds that of conventional glazed glasses. The alkali resistance of quartz glass-ceramics during its glazing with glass-crystalline glaze increases more than 4 times. ...
