-
1.
LASER-INDUCED TRANSFER OF COLORING AGENT TO GLASS FOR MARKING STRUCTURAL OPTICS PRODUCTS
-
(Not-set)
-
A laser marking process for glass products was studied. This process involves laser-induced transfer of ink vapor to the product surface upon irradiation from the opposite side through the glass. A pulse-periodic ...
-
2.
METHODS OF FORMING COMPLEX PROFILE PRODUCTS FROM HEAT-RESISTANT CERAMIC MATERIALS BASED ON SILICON CARBIDE
-
(Not-set)
-
The possibility of obtaining complex-shaped mechanical engineering products based on reaction-sintered silicon carbide using two methods - mechanical processing of polymerized blanks before sintering and ...
-
3.
CHARACTERISTICS OF GLASSES IN PRODUCTS OF EXPERIMENTAL MODELING OF IMPACT MELTS
-
(Not-set)
-
... glasses have been produced from aluminosilicate and quartz components of the host target rocks of the Kara target under pressure conditions ?90 GPa and temperatures ?7000 °C. To study the synthesized products ...
-
4.
MODERN TRENDS IN THE DEVELOPMENT OF TECHNOLOGIES FOR MATTING GLASS PRODUCTS
-
(Not-set)
-
Modern trends in the development of technologies for matting glass and glass products are considered. An effective technology of glass matting using alternative energy sources, in particular low-temperature ...
-
5.
RESOURCE- AND ENERGY-SAVING TECHNOLOGY FOR DECORATING GLASS PRODUCTS WITH FOAMING PAINTS
-
(Not-set)
-
An energy-saving technology for decorating glass products with foaming paints has been developed. The optimal parameters of coating firing by the flow of plasma–forming gas – argon are determined. The ...
-
6.
The Prospects for the Use of Clay Raw Materials From the "Krupeisky Sad" Deposit For Obtaining Heat-Resistant Ceramic Product
-
(Not-set)
-
The complex study of the mineralogical and chemical composition, as well as the technological properties of clay from the “Krupeisky Sad” deposit of the Republic of Belarus, was carried out. The features ...
-
7.
Optimizing Technological Regulation of Container Glass Manufacturing: Best Available Techniques, General Binding Rules and Carbon Intensity of Products
-
(Not-set)
-
... NEI sources by General Binding Rules. The authors emphasize that resource efficiency parameters could be used to calculate the carbon intensity indicators for glass products. These indicators could be ...
-
8.
A New Design of a Pendulum Clamshell for the Formation of Mineral Wool Products
-
(Not-set)
-
The necessity of developing a new design of the pendulum clamshell for the formation of mineral wool products is shown. One of the possible variants of the design of mechanical-driven pendulum clamshells ...
-
9.
Influence of Slip Evacuation on Properties of Large-Size Products from Quartz Ceramics
-
(Not-set)
-
It is shown for the first time that the slurry evacuation method can be used within the technology of manufacturing large-size radio-technical items from quartz ceramics. According to the results of the ...
-
10.
Papulova G. N., Kvasnikov M. Yu. Development of Pigmented Colored Lead-Free Glazes to Improve the Structural Quality of Ceramic Products 50
-
(Not-set)
-
The features of the surface structure of various types of ceramics are determined and their comparative characteristics are presented. The decoration of faience with colored glazes is considered and the ...
-
11.
Technological Aspects of Using Glass Mass Granulators in Production of Different Glass Products
-
(Not-set)
-
Various designs of molten glass granulators used in the production of glass containers and other glass products are considered. The main advantages and disadvantages of such equipment installed in the ...
-
12.
Identification of Porcelain Products by Non-Destructive Optical
Spectroscopy Methods
-
(Not-set)
-
... of porcelain products are presented. According to the color characteristics and the list of optically active luminescence centers (OACL), the porcelain products were graded according to the composition ...
-
13.
Development of an Organic Binder for Ceramic Products Obtained by the Additive Technology Method
-
(Not-set)
-
When using almost all types of additive technologies, it is mandatory to use a binder with further heat treatment of the finished product. The binder compositions can be very diverse. Correct selection ...
-
14.
Energy Indicators of Foam-Glass-Concrete Building Products
-
(Not-set)
-
The results of studies of performance indicators of samples of foam glass concrete building products are presented. For a more visual representation of the possibilities of using products in various conditions, ...
-
15.
New Technology for Forming Mineral Products
-
(Not-set)
-
A new technology for the formation of a multilayer mineral wool carpet by means of a pendulum zigzag layout of a primary mineral wool carpet is described, which consists in the formation of a loop with ...
-
16.
Synthesis of Mullite on the Basis of Aluminum- and Silicon Oxygen Products of Sulfuric-Acid Processing of Nepheline
-
(Science for ceramic production)
-
For the synthesis of mullite 3Al 2 O 3 & middot; 2SiO 2 , hydrated aluminum oxide (GOA) and silicon dioxide SiO 2 obtained by sulfuric acid treatment of nepheline, as well as commercial finely dispersed ...
-
17.
Cordierite Glass-Ceramic for Radioengineering Products
-
(Science for ceramic production)
-
A porous cordierite glass-ceramic was obtained. The processes of crystallization and sintering are considered, some properties of cordierite glass-ceramics made of magnesium-aluminosilicate glass are determined. ...
-
18.
The Quality Improvement of Construction Products Based on Technogenic Crushed Glass
-
(Utilization of waste)
-
The size of the fraction of ground glass as the main component has a decisive influence on the quality of building products made of foam glass concrete. This indicates the need to ensure a given size of ...
-
19.
Laser Technology for Removal of Conducting Coatings from Electrowarmed Glassing Products (Review)
-
(Science for glass production)
-
A highly efficient method of laser removal of indium oxide films doped with tin In 2 O 3 (Sn) from the surface of soda-lime-silicate glass used for the manufacture of glazing products for railway transport ...
-
20.
Study of the Effect of Paraffin Production Waste on the Properties of Ceramic Products
-
(Utilization of waste)
-
The possibility of using (2.5 - 10 & # 37; by weight) wastes from the production of paraffin wax (OPP) in the production of porous ceramics has been investigated. Additive 2.5 & # 37; OPP increases the ...
