-
1.
Physical and Chemical Researches of Raw Materials of the Far East of Russia for Synthesis on Their Basis of Foam Glass and Protective Enamel Coatings
-
(Raw materials)
-
Investigations of the physicochemical properties of silica-containing raw materials from the Russian Far East, suitable for the synthesis of foam glass and protective enamel coatings for oil and gas pipelines, ...
-
2.
Development of enamel coatings for promising combined-cycle plants
-
(Coatings)
-
High-temperature enamel coatings with a sufficiently high firing temperature have been obtained, which provide the necessary protective properties and heat resistance. The results of scientific and experimental ...
-
3.
Glass-enamel corrosion-resistant coatings for steel pipelines
-
(Coatings)
-
Currently, the problem of obtaining a defect-free corrosion-resistant glass enamel coating for steel pipelines is an urgent problem. The composition of the corrosion-resistant glass enamel coating for ...
-
4.
Glass-ceramic protective coatings for gasostatic processing of refractory nickel alloys
-
(Coatings. Enamels.)
-
The possibility of creating glass-ceramic coatings in the BaO - Al 2 О 3 - SiO 2 system for high-temperature gas-static treatment of heat-resistant nickel alloys is shown. The physicochemical and ...
-
5.
Single-frit nickel-free glassenamel Poesta coatings
-
(Coatings. Enamels.)
-
The basic principles of the POESTA powder electrostatic technology used at the enamel enterprises in Ukraine are considered, the requirements for powders and protective glass enamel coatings are presented. ...
-
6.
The influence of mixed valence cations on bio-cide behavior of glass-enamel coatings
-
(Coatings. Enamels.)
-
The prospect of using cations of metals of variable valence in the production of biocidal glass enamel coatings for household purposes has been established. The biocidal effect of glass enamel coatings ...
-
7.
Chemical resistance of titanium enamel coatings
-
(Coatings. Enamels.)
-
Titanium enamel for steel cookware has been developed, the composition of which contains a reduced amount of fluorides and boric anhydride in comparison with industrial enamel ESP-117. A comparative analysis ...
-
8.
Effect of ceramic coatings on sound absorbing properties of heat-protective materials
-
(Coatings)
-
Ceramic coatings for heat and sound absorbing materials, a technological scheme for the manufacture, application and formation of ceramic coatings have been developed, which makes it possible to obtain ...
-
9.
Protective technological coatings for thermal treatment of high-strength structural steels (VKS)
-
(Coatings. Enamels.)
-
Developed "universal" frit-free coatings for heat treatment of high-strength steels of the VKS type. The kinetics of oxidation of VKS steel with and without coating has been investigated. The efficiency ...
-
10.
Use of titanium dioxide in development of antibacterial glass enamel coatings
-
(Coatings. Enamels.)
-
The expediency of using titanium dioxide in the development of antibacterial glass enamel coatings has been established. A bactericidal powder (filler) based on hydroxyapatite modified with titanium oxide ...
-
11.
Treatment of titanium surface prior to deposition of dental enamel coatings
-
(Coatings. Enamels.)
-
A method for surface treatment of titanium and its alloys prior to the application of dental enamels is proposed. The effect of surface treatment and protective atmosphere on the adhesion strength at the ...
-
12.
TEMPERATURE AND TIME PARAMETERS FOR THE SYNTHESIS OF AMORPHIZED INORGANIC COATINGS FOR PROTECTING THE INNER SURFACE OF STEEL PIPELINES
-
(Not-set)
-
... (in the range of 700…950 °C, holding for 0.5…3.5 min) on the structure and quality of the protective layer has been studied using X-ray phase analysis and optical microscopy. It has been established that ...
-
13.
ANTIBACTERIAL PROPERTIES OF BOROSILICATE ENAMEL WITH NANOSCALE ZINC OXIDE PARTICLES
-
(Not-set)
-
Glass-enamel coatings have been modified with nanosized particles, which expands the scope of their application and is a promising direction. It has been established that the introduction of nanosized ...
-
14.
PROTECTIVE TECHNOLOGICAL COATING BASED ON ZrO2–BaO–B2O3–SiO2 SYSTEM FOR PROTECTION OF HEAT-RESISTANT NICKEL ALLOY WITH SINGLE-CRYSTAL STRUCTURE DURING HEAT TREATMENT
-
(Not-set)
-
The purpose of this work was developing of protective technological coating for protection of heat-resistant nickel alloy with single-crystal structure ZHS30 during high-temperature homogenization. Based ...
-
15.
Investigation of the Adhesion Strength of Reactive Coatings on VZh171 Alloy by Sclerometry Method
-
(Not-set)
-
Studies of the adhesion strength of an enamel reaction-hardening coating on a heat-resistant nickel alloy VZH171 by the sclerometry method have been carried out. The threshold value of the loads required ...
-
16.
Development and study of alkaly-resistant enamel for chemical units? protection
-
(Coatings)
-
On the basis of a patent search and theoretical calculations of physicochemical properties, the compositions of enamels were selected and refined, which were synthesized and investigated for consistency ...
-
17.
Multifunctional high-temperature coatings for heat-insulating materials
-
(Coatings)
-
The outer surfaces of reusable spacecraft are covered with special heat-shielding materials. These materials also need to be protected from erosion, moisture, etc. with thermal control coatings. At VIAM, ...
-
18.
Glass-ceramics coatings for protection of steels from hydrogen
-
(Coatings. Enamels.)
-
The possibility of synthesis of compositions and technology for the preparation and application of a gas-tight isotropic coating for the protection of special structural steels used in the manufacture ...
-
19.
Glass-ceramic insulator coatings for thick-film energy-saturated systems
-
(Coatings)
-
Electrically insulating glass-ceramic coatings with operating temperatures up to 400 ° C for stainless steel substrates have been developed. Their physical and chemical properties have been investigat
-
20.
High-temperature coatings for fiber insulation materials
-
(Coatings)
-
Functional coatings for heat-shielding and heat-insulating materials based on quartz fibers and whiskers are considered.
