-
1.
INFLUENCE OF TECHNOLOGICAL PARAMETERS OF THE FLOAT PROCESS ON THE ADHESION OF TIN OXIDES TO SHEET GLASS
-
(Not-set)
-
The influence of the operating mode of the float bath on the adhesion of tin oxides to the lower surface of the produced glass ribbon was studied. Statistical analysis of the experimental data and modeling ...
-
2.
The effect of the float-side location on the sheet glass strength upon bending
-
(Science for glass production)
-
It was found that the transverse bending strength of float glass sheet depends on the location of the float side relative to the applied load. If, when bent, the side in contact with the tin (float side) ...
-
3.
Special features of the structure and service of high-capacity glass furnaces of sheet float-glass
-
(Science for glass production)
-
The data on the improvement of the main technical and economic indicators of glass-melting furnaces in the leading countries and JSC "Salavatsteklo" are presented. The issues of improving the design ...
-
4.
Developing of the float-process in sheet glass production
-
(Science for glass production)
-
Three independent float glass production methods developed by Pilkington (England), Pi-Pi-Gee Industries (USA) and Saratov Glass Institute (Russia) are considered. The fundamental differences between these ...
-
5.
Annealing process control in production of flat glass by float-method
-
(Science for glass production)
-
A mathematical model has been developed on fuzzy sets, which describes the dependence of residual stresses in sheet glass on the annealing mode. An adaptive control system for glass annealing is proposed ...
-
6.
Rational heat and technological operation of float-glass tanks
-
(Science for glass production)
-
The basic principles of controlling the thermal and technological modes of the glass-making process in furnaces for the production of sheet glass by the float method are presented. To ensure more efficient ...
-
7.
An efficient float process control of making flat glass
-
(Efficiency and quality)
-
The results of simulation modeling of the technological process control for the production of sheet glass by the float method are presented. the effectiveness of a systematic approach to management is ...
-
8.
Analysis of sheet glass making process in large glass furnaces
-
(Science for glass production)
-
The analysis of the process of melting float glass in multi-tonnage glass-making furnaces has been carried out. The optimal values ??of the speed, duration of cooking and molten glass are determined. It ...
-
9.
The influence of the constant stress of float glass on cutting quality
-
(Science for glass production)
-
The main reasons for the occurrence of defects when cutting glass are given: breakage not along the cut and breakage during cutting. The main attention is paid to the residual stresses in the glass, the ...
-
10.
The use of raw materials with predetermined characteristics: additional reserve for increasing the efficiency of glass melting furnaces and quality of the float glass production
-
(Efficiency and quality)
-
The results of the study are presented and the reasons for the instability of the high quality of float glass at a high level of equipment and technology used in the production of glass are analyzed. Based ...
-
11.
Control of a float glass annealing
-
(Efficiency and quality)
-
Models based on neural networks, describing the process of annealing a moving strip of sheet glass in a tunnel oven, have been developed. The problem of annealing temperature control is formulated. Simulation ...
-
12.
A rational approach to regulation of the redox characteristics of the batch for melting float glass
-
(Efficiency and quality)
-
Optimization of physicochemical processes in the preparation of glass batch, improvement of the processes of its preparation, transportation, feeding into the glass-making furnace and quality indicators ...
-
13.
Influence of the technological parameters of float glass manufacturing on the heat resistance
-
(Science for glass production)
-
The article presents the results of studies of the thermal stability of heat-absorbing float glass with a thickness of 4.0 - 12.0 mm. It is shown that heat-absorbing glass has high thermal stability (more ...
-
14.
The modern technologies of float glass cutting
-
(Science for glass production)
-
The main types of cutting of sheet glass are considered. Mechanical roller cutting is described in most detail as the most common at the moment. Explains the effect of roller geometry and loading on edge ...
-
15.
Synthetic raw materials for float glass production
-
(Science for glass production)
-
The prospects of replacing the traditional charge with a charge containing synthetic raw materials (SSM) or entirely consisting of SSM are shown. This will allow saving raw materials and fuel and energy ...
-
16.
Sol-gel coatings on the float-glass
-
(Science for glass production)
-
The refractive indices and thickness of double-sided sol-gel coatings of different compositions, applied by dipping onto float glass sheets, have been measured. It was found that the refractive index on ...
-
17.
Special features of batch preparation and glass melting upon using different kinds of soda in sheet glass production
-
(Science for glass production)
-
The experience of using in a continuous technological process of production of sheet light-heat-shielding, mass-colored float glass "light" and "heavy" soda produced by JSC "Soda" ...
-
18.
PREPARATION OF A COMPOSITE BASED ON HOLLOW GLASS MICROSPHERES MODIFIED WITH SILVER NANOPARTICLES
-
(Not-set)
-
Composite materials based on K 25 hollow glass microspheres were obtained by modifying them with silver nanoparticles obtained by an environmentally friendly “green” method using an aqueous plant extract ...
-
19.
MODERN TRENDS IN THE DEVELOPMENT OF TECHNOLOGIES FOR MATTING GLASS PRODUCTS
-
(Not-set)
-
Modern trends in the development of technologies for matting glass and glass products are considered. An effective technology of glass matting using alternative energy sources, in particular low-temperature ...
-
20.
Information Analysis of the Coefficient of Use of Flat Glass in Production
-
(Not-set)
-
An informational analysis of the yield of suitable glass in the production process has been carried out. The influence of waste from individual production stages on the utilization rate of glass is shown. ...
