-
1.
ASSESSMENT OF THE EFFECT OF LITHIUM CHLORIDE ON THE PROPERTIES OF BOROPHOSPHATE GLASS DURING THE IMMOBILIZATION OF RADIOACTIVE WASTE FROM PYROCHEMICAL PROCESSING OF SPENT NUCLEAR ...
-
(Not-set)
-
... – the amorphous structure and homogeneity of the obtained material were confirmed. Using differential scanning calorimetry and thermal conductivity measurements, the thermophysical properties of the material ...
-
2.
ION EXCHANGE HARDENING OF GLASSES OF THE ZnO–MgO–Al2O3–SiO2 SITALL-FORMING SYSTEM WITH AN INCREASED CONTENT OF Na2O
-
(Not-set)
-
Zinc magnesium aluminosilicate (ZMAS) glasses have been obtained with the addition of Na2O (from 1.1 to 7.0 mol. %). Influence of the Na2O content on glass forming ability and effectiveness of the ion-exchange ...
-
3.
INVESTIGATION OF THE STRUCTURE AND INFLUENCE OF ION EXCHANGE ON THE MICROHARDNESS OF LOW-ALKALI TRANSPARENT GANITE GLASS-CERAMICS
-
(Not-set)
-
Transparent glass-ceramics are attracting more and more attention as a material for protecting the screens of electronic devices. The paper considers the possibility of carrying out ion-exchange of transparent ...
-
4.
Influence of the Anionic Composition of the Starting Salts on the Preparation of Zinc Orthostannate by the Sol-Gel Method
-
(Not-set)
-
The effect of the anionic composition of zinc salts upon interaction with tin (IV) chloride on the preparation of zinc orthostannate by the sol-gel method was studied. It was determined that the minimum ...
-
5.
Thermophysic properties of silicon carbide based composite ceramics materials made by sparkplasma sintering (SPS)
-
(Science for ceramic production)
-
The factors affecting the thermal conductivity of ceramic composite materials based on SiC with additives B 4 C, AlN, Si 3 N 4 , Y 2 O 3 , Al 2 O 3 , HfB 2 , obtained by spark plasma sintering ...
-
6.
Studies in technological processes of foam-glass making with mathematical simulation (a review)
-
(Science for glass production)
-
An overview of the directions for improving the technological processes of foam glass production using mathematical modeling over the past 15 years is presented. The developments of leading scientists ...
-
7.
Hydraulic radius evaluation in porous structure of ceramic materials
-
(Science for ceramic production)
-
The analysis of the existing dependences describing the capillary absorption of liquid in porous materials is carried out on the basis of an ideal model and data of mercury porosimetry. It is shown that ...
-
8.
Bottom block for glass furnaces: fired articles or concrete?
-
(Refractories for glass production)
-
... lower structure of glass-melting bath furnaces (bottom beam), have been carried out. The experimentally obtained data on thermophysical properties, thermal expansion coefficient, glass resistance of products ...
-
9.
Liquid glass fire-retardant based on mechanically activated alumina
-
(At the enterprises and institutes)
-
... ° C, a decrease in thermal diffusivity is achieved by the formation of a heat-insulating layer foamed with vapors of water dehydrated from liquid glass. In the high-temperature region, the nepheline synthesis ...
