-
1.
RESEARCH OF THE DEPENDENCE OF THE THERMAL STRENGTH PROPERTIES OF REFRACTORY MATERIALS OF THE LADLE LINING OF THE FERROALLOY PRODUCTION ON TEMPERATURE
-
(Not-set)
-
The article is devoted to the study of the dependence of the change in compressive strength on temperature for refractory materials of the lining of a pouring ladle of ferroalloy production – fireclay ...
-
2.
SYNTHESIS OF MARBLITE IN A PLASMA GLASS FURNACE
-
(Not-set)
-
The possibility of using waste from the enrichment of ferruginous quartzites of KMA and waste from vanadium production for the plasma synthesis of marblite and structural elements of a plasma glass furnace ...
-
3.
POSSIBILITY OF USING DUMPS OF CHUPINSKY PEGMATITES IN THE PRODUCTION OF CERAMIC MATERIALS
-
(Not-set)
-
The possibility of using pegmatite dumps in the production of ceramic materials is shown. Microcline pegmatite according to the results of research of dielectric and technological properties in the future ...
-
4.
PREPARATION OF A COMPOSITE BASED ON HOLLOW GLASS MICROSPHERES MODIFIED WITH SILVER NANOPARTICLES
-
(Not-set)
-
Composite materials based on K 25 hollow glass microspheres were obtained by modifying them with silver nanoparticles obtained by an environmentally friendly “green” method using an aqueous plant extract ...
-
5.
INFLUENCE OF TECHNOLOGICAL FACTORS ON MECHANICAL STRENGTH OF PERICLASE-CARBON REFRACTORIES
-
(Not-set)
-
The paper presents the results of research on the influence of humidity, heat treatment temperature, fractional composition of periclase, time of aging before heat treatment, the amount of carbon in the ...
-
6.
APPLICATION OF SOL-GEL TECHNIQUE FOR SYNTHESIS OF NANOSTRUCTURED PIEZOELECTRIC MATERIALS IN LEAD ZIRCONATE-TITANATE SYSTEM – A REVIEW. PART 1. POWDERS SYNTHESIS
-
(Not-set)
-
In the present study, we presented a review progress in sol-gel method for the synthesis of powders of ferroelectric ceramics of the PbTiO3–PbZrO3 system, based on the controlled hydrolysis of mixtures ...
-
7.
STUDY OF THE STRUCTURAL AND MECHANICAL PROPERTIES OF SAMPLES BASED ON MAGNESIUM OXIDE FORMED IN THE PROCESS OF POLYMERIZATION OF ORGANIC BINDER
-
(Not-set)
-
The article presents the results of a study of the influence of humidity, oxygen on the formation of the structure and strength properties of products based on magnesium oxide and organic binder SFPR-054. ...
-
8.
PRODUCTION OF GLASS FOAMS ON THE BASIS OF ROCKS
-
(Not-set)
-
The results of research on the production of granular and block foam glass materials based on widespread highly siliceous rocks and technogenic waste are presented. The main attention of researchers is ...
-
9.
Energy-Saving Technology Decoration of Varietal Dishes By Plasma Spraying
-
(Not-set)
-
An energy-saving technology for decorating varietal dishes by plasma spraying of colored varietal and container glasses has been developed. The optimal parameters of glass powder deposition are determined. ...
-
10.
Features of Batch Mixing with Selenium
-
(Not-set)
-
The features of batch mixing for flint and heat absorbing bronze glass melting containing selenium are considered. Methods to decrease selenium losses during glass mixture transportation and glass melting ...
-
11.
The Influence of Nepheline Syenite and Waste of Mineral Wool Production on the Operational Properties of Ceramics
-
(Not-set)
-
The possibility of using wastes from the production of mineral wool (MB) and nepheline-syenite (NS) in the production of ceramics in order to improve the physical and mechanical properties of the samples, ...
-
12.
Analysis of the Couses of Efflorescence in Brickwork in the Aral Sea Region
-
(Not-set)
-
The analysis of the main reasons for the formation of efflorescence in brickwork in the Aral Sea regions is presented. It has been established that as a result of alternating moistening and drying of the ...
-
13.
Synthesis and Properties of Porous Glass Composite Modified by Silicon Carbide
-
(Not-set)
-
The synthesis and properties of a porous glass composite obtained on the basis of cullet powder at temperatures not exceeding 100 ° C using aluminum powder and liquid glass are considered. It is shown ...
-
14.
New Technology for Forming Mineral Products
-
(Not-set)
-
A new technology for the formation of a multilayer mineral wool carpet by means of a pendulum zigzag layout of a primary mineral wool carpet is described, which consists in the formation of a loop with ...
-
15.
Foam-Glass Ceramics Synthesis with Application of Mechanized Preparation of the Batch by Extrusion Method
-
(Glassceramics)
-
The synthesis of an inorganic heat-insulating material - glass-foam ceramics with the use of activating methods for preparing a charge in the form of its extrusion and autoclaving is considered. The interaction ...
-
16.
Plasma Technologies in the Manufacture of Glass
-
(Science for glass production)
-
The possibility of using plasma technologies in glass production is considered. On the example of the synthesis of lump silicate in a plasma glass-making furnace, the features of the glass-making process ...
-
17.
Obtaining Finely Dispersed Spheric Particles of Iron-Oxide Pigments from
Kazakhstan Diatomites
-
(Raw materials)
-
It is proposed to use natural raw materials - ferruginous diatomites from the Zhalpak deposit (Kazakhstan) as an affordable cheap raw material for obtaining complex iron oxide silica-containing pigments. ...
-
18.
Use of improved glassy phosphate composition for water treatment
-
(At the enterprises and institutes)
-
The results of experiments on studying the properties of a glassy phosphate composition, modernized with copper-containing additives, are presented. The composition is designed to protect the surfaces ...
-
19.
Thermal performance of diatomite-based materials in a broad temperature range
-
(Coatings)
-
The dependences of the ultimate strength in compression of diatomite on temperature in the temperature range of 50 - 700 ° C are investigated. The ultimate strength in compression at a temperature of 450 ...
-
20.
Methods of magnesium aluminate spinel powders synthesis for optically transparent ceramics (a review)
-
(Science for ceramic production)
-
Prospects for the use of optically transparent ceramics made of aluminum-magnesium spinel are considered. The technologies for the synthesis of spinel powders for subsequent use in the production of transparent ...
