-
21.
HIGH-TEMPERATURE LIGHTWEIGHT ALKALINE-ACTIVATED MATERIALS WITH ADDITION OF MULTI-WALLED CARBON NANOTUBES
-
(Not-set)
-
The effect of the concentration (from 18 to 6 %) of an alkaline activator (AA) solution on the viscosity and basic properties of geopolymer composites based on chamotte with additives of foam glass production ...
-
22.
CARBON FOOTPRINT OF THE LIFE CYCLE OF GLASS CONTAINER
-
(Not-set)
-
... solutions for reducing carbon footprint of glass containers manufacturing industry. The publications have been arranged in order to minimize the uncertainties and expand the scope of the investigation. ...
-
23.
A Diagnostics of Working Zone with Stable Gradient in Magne-tometer with Magnetic Susceptibility
Control of Particles (in the Magnetic Separation Tasks)
-
(Not-set)
-
A ponderomotive method for obtaining information on the magnetic susceptibility of iron-containing particles in various media, including glass and ceramic industries, is considered. A corresponding magnetometer ...
-
24.
Effect of Municipal Solid Waste Incineration Fly Ash on Properties, Durability and Environmental Toxicity of Fired Aluminosilicate
-
(Utilization of waste)
-
Investigations of the effect of fly ash generated from the incineration of municipal solid waste on the properties, durability and environmental toxicity of fired luminosilicates are presented. In the ...
-
25.
The Quality Improvement of Construction Products Based on Technogenic Crushed Glass
-
(Utilization of waste)
-
The size of the fraction of ground glass as the main component has a decisive influence on the quality of building products made of foam glass concrete. This indicates the need to ensure a given size of ...
-
26.
Influence of SiO2/Al2O3 ratio on structure, properties and heat resistance of geo-polymer refractory materials
-
(At the enterprises and institutes)
-
A study of the properties of lightweight geopolymer materials (GM) based on refractory technogenic waste of aluminosilicates has been carried out. The effect of the ratio of oxides SiO 2 and Al 2 O ...
-
27.
Systematic approach to secondary products implementation in glass-making
-
(Environmental protection. Utilization of waste)
-
The technological features of the use of secondary products in the technology of silicate materials are considered; the main problems that must be taken into account when using secondary products and substandard ...
-
28.
Decrystallisation of amorphous phase in foam-glass as a method for alkali-silica reaction inhibition
-
(Science for glass production)
-
The possibility of eliminating the alkali-silicon reaction (ASR-interaction) in foam glass due to the crystallization of the glass is considered. It was found that devitrite (Na 2 Ca 3 Si 6 O 16 ...
-
29.
Effect of biofuel combustion products on refractory material phase composition and structure
-
(At the enterprises and institutes)
-
Changes in the phase composition and microstructure of an aluminosilicate refractory material destroyed during its operation in a solid biofuel combustion unit have been investigated. Based on the results ...
-
30.
Glassware toughening by ultrafine nanoadditives
-
(Science for glass production)
-
The effect of the use of ultradispersed (nano) materials on the strength characteristics of glass samples of various chemical compositions obtained by high-temperature sintering from powder-forming components ...
-
31.
Structure formation in a porous high-refractory granular ceramic material
-
(Science for ceramic production)
-
On the basis of model and experimental studies, the formation of the structure of a porous highly refractory ceramic material with a granular structure has been studied. The concept of the structure of ...
-
32.
Bottom block for glass furnaces: fired articles or concrete?
-
(Refractories for glass production)
-
Comparative studies of the properties of fired fireclay products and products made of low-cement refractory concretes (LCC), fired at different temperatures, and non-fired concretes, used for laying the ...
-
33.
Stabilization of glass spectral characteristics and technology
-
(Science for glass production)
-
Sheet glass from different manufacturers or from the same production, but at different periods of their production, differ in color shade and total light transmission, which depends not only on the total ...
-
34.
Methods of measuring the flow properties of pastes for extrusion (review)
-
(Science for ceramic production)
-
A classification of methods for measuring the rheological properties of ceramic pastes for extrusion is given. Depending on the magnitude of the shear stresses at which the tests are carried out, it is ...
-
35.
Heat insulation material based on the glass cut subjected to mechanochemical activation
-
(Utilization of waste)
-
Methods of recycling mixed glass breakage, which is a part of solid household waste, are analyzed. It is shown that the problem of utilization of this type of waste is still relevant. On the basis of the ...
-
36.
Processes of phase-and structure-formation upon self-propagating high-temperature synthesis in the system Al - MgCO3 - SiO2 - C
-
(Science for ceramic production)
-
The processes of phase formation and structure formation in the Al - MgCO 3 - SiO 2 - C system during self-propagating high-temperature synthesis are considered. The dependences of the structure and ...
