-
21.
Crystalline phase formation in foamglass and its effect on material performance
-
(Science for glass production)
-
The results of studies on the formation of the crystalline phase in the foam glass matrix, as well as the effect that it has on the operational properties of the material (compressive strength, density, ...
-
22.
Development of a process system for sand washing
-
(Equipment. Technology)
-
... 0.92% Al 2 O 3 , 0.43% Fe 2 O 3 , 0.11% TiO 2 , 0.04% Cr 2 O 3 , sand was obtained by the most demanded industry grade ВС-030-В. A distinctive feature of the technological scheme of gravity separation ...
-
23.
Compositions and technological parameters for synthesis of cellular insulator construction glass materials with tailored density
-
(RESOURCE SAVING)
-
The possibility of synthesis of heat-insulating building materials with a given density on the basis of cullet, slag of a metallurgical plant and ash and slag waste from thermal power plants is considered. ...
-
24.
Properties of glass-foam material doped with nanosized zirconia
-
(Science for glass production)
-
The effect of small additions of zirconium concentrate with an average particle size of 30 nm on the physical and mechanical properties of foam glass is considered. It was found that the introduction of ...
-
25.
The use of modified Petri networks as control models in glass batch making process
-
(Growth of the production efficiency)
-
It is proposed to use modified Petri nets, describing the operations that make up the technological process of preparing a glass batch, as control models of the technological process to ensure the efficiency ...
-
26.
Thermophysics of stove tiles made with the use of galvanic waste
-
(Science for ceramic production)
-
... characteristics of products is shown. The introduction of wastewater sludge from the galvanic industries of Atlant and Belorussian Metallurgical Plant in an amount of 9% promotes the formation of a ceramic ...
-
27.
Structural and technological characteristics of glass melts
-
(Science for glass production)
-
A review of works on the structure of silicate and glass melts is carried out using the provisions of synergetics, cluster and fractal concepts. With this in mind, some features of industrial technological ...
-
28.
Bottom block for glass furnaces: fired articles or concrete?
-
(Refractories for glass production)
-
Comparative studies of the properties of fired fireclay products and products made of low-cement refractory concretes (LCC), fired at different temperatures, and non-fired concretes, used for laying the ...
-
29.
Effect of kolemanite additives on the properties, microstructure and sintering of heat-resistant spodumene ceramics
-
(Science for ceramic production)
-
The influence of colemanite additives on sintering, properties and microstructure of spodumene ceramics has been investigated. It has been established that the introduction of colemanite in an amount of ...
-
30.
Diffusion-chemical interactions in the glass system K2О - РbО - SiO2
-
(Science for glass production)
-
The analysis of diffusion-chemical interactions in glasses of the K 2 O - PbO - SiO 2 system has been carried out. Interactions are considered from the kinetic point of view in relation to the structural ...
-
31.
Dyeing of ceramic bricks
-
(Science for ceramic production)
-
The results of a study of the possibility of volumetric coloring of ceramic bricks by introducing manganese and iron ores, as well as metallurgical slags and sludge from electroplating industries, are ...
