-
1.
Influence of High-Alumina Sludge of Alkaline Etching on Technical Parameters and Phase Composition of Acid-Resistant Materials
-
(Not-set)
-
The introduction of 40 % calcined alkali-etched sludge into the ceramic mass of nanotechnogenic high-alumina raw materials makes it possible to obtain products with high physical, mechanical and chemical ...
-
2.
Synthesis of refractory glass-ceramic coatings using high-alumina waste
-
(Utilization of waste)
-
The results of synthesis and physicochemical studies of heat-resistant glass-crystalline coatings using high-alumina waste from the metallurgical industry, intended to protect nichrome alloys from high-temperature ...
-
3.
Production of high-alumina refractory and tin-oxide articles
-
(Growth of the production efficiency)
-
NIIStekla has organized the production of high-alumina refractories for feeders of glass-forming machines and tin dioxide electrodes. Il. 1.
-
4.
Sintering kinetics of high-alumina ceramics with complex additive
-
(Science for ceramic production)
-
The results of studies of the kinetics of ceramics compaction during sintering under isothermal and non-isothermal heating conditions are presented. Kinetic equations of the compaction process are given ...
-
5.
PHYSICOCHEMICAL STUDIES OF DIABASE ROCKS OF THE UZUNBULAK DEPOSIT TO OBTAIN ACID-RESISTANT MATERIALS
-
(Not-set)
-
The chemical and mineralogical compositions, physical and chemical characteristics and phase transformations of diabase rocks of the Uzunbulak deposit were studied. It has been shown that as a result of ...
-
6.
INFLUENCE OF NANODISPERSED ALUMINUM OXIDE ON THE PHYSICAL AND MECHANICAL PROPERTIES OF TECHNICAL CERAMICS
-
(Not-set)
-
The article presents the results of a study on the development of a composition of technical ceramics for ceramic grinding bodies and the influence of dispersed oxide on its basic properties. It is shown ...
-
7.
CERAMIC MASS BASED ON THE SYSTEM KAOLIN–ALUMINA-CONTAINING WASTE–DOLOMITE
-
(Not-set)
-
The article investigates the high-temperature interaction and sintering processes of samples of high-alumina masses of low-temperature firing for technical ceramics based on the ternary system kaolin–alumina-containing ...
-
8.
APPLICATION OF THERMAL PLASMA ENERGY FOR PRODUCING GLASS-CRYSTALLINE MATERIALS
-
(Not-set)
-
The characteristics of glass-ceramic materials obtained using thermal plasma have been studied. The effect of TPP ash on the properties of glass-ceramic materials should be taken into account. Samples ...
-
9.
Fly Ash as a Technogenic Raw Material for the Production of Re-fractory and Insulating Ceramic Materials (Review)
-
(Not-set)
-
A review of the literature on the production of fly ash at thermal power plants and the level of its processing in Russia and abroad is presented. The properties of fly ash and its fields of application ...
-
10.
. Gas Processing Waste Perspective Raw Materials for Designing the Composition of Ceramic Grinding Bodies
-
(Not-set)
-
Investigated the chemical and mineralogical characteristics of alumina-containing waste & # 8211; catalysts of the gas processing industry and their use in the design of charge compositions of high-alumina ...
-
11.
Research of Mullitization Processes in Floated Materials on the Basis of Kaolinite Clay and Waste
-
(Not-set)
-
The results of research on the production of fused materials based on kaolinite clay and high-alumina waste using a concentrated radiant flux are presented. The phase composition, microstructure, and elemental ...
-
12.
Low-Temperature Co-Firable Ceramic Li2Zn3Ti4O12 with an Eutectic Additive in the Li2O-B2O3-SiO2 System
-
(Not-set)
-
In the Li 2 O-ZnO-TiO 2 system, a material has been developed for the technology of low-temperature co-firing of ceramics with a view to its use in the production of electronic components. The sintering ...
-
13.
Porosity Structure and Technical Properties of Ceramic Materials Based on Wastes of Nonferrous Metallurgy of Eastern Kazakhstan
-
(Not-set)
-
Clinker materials were obtained from non-ferrous metal waste, where the clay part of the tailings was used as the clay material. gravity of zircon-ilmenite ores (GZI), and feldspar concentrate (PShK) - ...
-
14.
Synthesis, Structure and Properties of One- and Multi-Component Additives for Ceramic Materials Based on Aluminum Oxide (review)
-
(Science for ceramic production)
-
One- and multicomponent sintering additives for ceramics based on aluminum oxide are presented. It has been established from the literature that the use of one-component additives is less effective than ...
-
15.
Rheological behaviour of ceramic slurries and physic-mechanic properties of acidresistant ceramics made of nanosized petroleum chemistry and non-ferrous metals production industrial waste, and pyrophy
-
(Utilization of waste)
-
A significant effect of the amount of aluminum-containing nanotechnogenic raw materials based on non-ferrous metallurgy and pyrophyllite on the structural and rheological properties of ceramic masses for ...
-
16.
Protection of Nichrome alloys articles from high-temperature cor-rosion (review)
-
(Coatings)
-
The results of the analysis of research in the field of developing compositions and methods of applying high-temperature coatings for the protection of various metals and alloys are presented. The relevance ...
-
17.
Heat-resistant thermal insulation products based on aluminosilicate fiber experience of usage in the lining of thermal units of ceramic industry
-
(Industrial experience. Energy saving.)
-
The structure and properties of the developed high-alumina products based on aluminosilicate fiber are shown. The application of the developed NK-29 products in the lining of high-temperature thermal units ...
-
18.
Use of aluminous waste from nonferrous industry in ceramic clinker production
-
(Utilization of waste)
-
Compositions of ceramic masses for the production of clinker products based on unenriched kaolin and nanotechnogenic raw materials in the form of alkaline etching sludge of aluminum and its alloys of the ...
-
19.
Effect of nanosized petrochemical waste with high alumina content on clinker heat resistance
-
(Science for ceramic production)
-
Studies have shown that it is advisable to use high-alumina nanotechnological raw materials as a softener to increase the thermal stability of clinker bricks. With an increase in the compositions of the ...
-
20.
Preventing crack formation in plastic molding of ceramic ware with high alumina content
-
(Science for ceramic production)
-
The reasons for the formation and methods of preventing structural cracks during the molding of high-alumina ceramics on screw presses are considered.
