-
1.
Production and properties of glassy metaphosphate composition for corrosion protection of water heating systems
-
(At the enterprises and institutes)
-
Considered is the production of a non-waste technology from simple and readily available substances and the use of an environmentally safe glassy metaphosphate composition (SFC) of patented compositions ...
-
2.
Composition and aggregative state of the products of TiO2 heating in argon atmosphere
-
(Science for ceramic production)
-
Compositions of condensed matter are calculated using thermodynamic modeling methods taking into account the existence of solid and liquid solutions from TiO 2 , TiO, Ti 2 O 3 , Ti 3 O 5 and Ti ...
-
3.
RESEARCH OF THE DEPENDENCE OF THE THERMAL STRENGTH PROPERTIES OF REFRACTORY MATERIALS OF THE LADLE LINING OF THE FERROALLOY PRODUCTION ON TEMPERATURE
-
(Not-set)
-
The article is devoted to the study of the dependence of the change in compressive strength on temperature for refractory materials of the lining of a pouring ladle of ferroalloy production – fireclay ...
-
4.
SYNTHESIS OF A FRIT FOR OBTAINING ENAMEL COATING OF STEEL PIPES BY THE METHOD OF INDUCTION HEATING
-
(Not-set)
-
The paper presents the results of a study of the processes of glass formation during the production of a frit by the method of induction heating. According to X-ray phase analysis, the resulting frit is ...
-
5.
Production of Ceramic Materials Based on Gabbro Using Liquid Glass as a Binding Component
-
(Not-set)
-
A method for obtaining ceramics from igneous rocks is proposed using the example of gabbro. The possibility of using potassium liquid glass as a binding component is shown. The mineral compositions of ...
-
6.
Obtaining Hollow Glass microspheres and Their Application in the Production of Water-Dispersion Coatings
-
(Science for glass production)
-
The results of obtaining hollow glass microspheres and their effect on the properties of facade water-dispersion paints and varnishes when replacing titanium oxide and calcium carbonate in the formulation ...
-
7.
Production of aluminum-graphite composite by spark-plasma sintering
-
(At the enterprises and institutes)
-
An alumina-graphite composite was obtained by the method of spark-plasma sintering. The influence of the size of graphite particles, the compaction temperature and the holding time on the formation of ...
-
8.
Physico-chemical studies of gaize as alternative raw materials for foam-glass and foamed materials production
-
(Science for glass production)
-
Are the data of physical and chemical studies of flasks given? chemical, phase and granulometric composition, degree of crystallinity, as well as their thermal stability in the temperature range of 90 ...
-
9.
Optimized air temperature selection for melting tanks heating
-
(Science for glass production)
-
The necessary level of air heating was determined by calculation, which ensures the maximum permissible temperature of the combustion products of the bath furnace in the combustion zone. The inexpediency ...
-
10.
Kinetics of foamglass formation at different heating rates
-
(Science for glass production)
-
The processes of glass powder melting, carbonate blowing agent decomposition and melt porization at different heating rates were investigated in order to identify the most optimal parameters of the technological ...
-
11.
The influence of preliminary binder heating on the quality of glass-composite pultrusion rods
-
(At the enterprises and institutes)
-
A description of a mathematical model based on Darcy's law for determining the pressure in the inlet part of the die in the manufacture of large-size composite rods obtained by pultrusion based on glass ...
-
12.
Production of mineral fibers from Kazakhstan ash in low-energy plasma units
-
(Utilization of waste)
-
A technology has been developed for the disposal of ash and slag wastes of the Republic of Kazakhstan in the production of mineral fibers using an electroplasma installation for melting silicate-containing ...
-
13.
Production of composite materials based on Kul'-Yurt-Tau pyrophillites
-
(Science for ceramic production)
-
... up to 1250 - 1350 ° C, depending on the composition of the initial charge. The production technology for obtaining materials is described. Products and refractory masses have found application in specific ...
-
14.
Production of composite materials based on Kul'-Yurt-Tau pyrofillite and phosphate binder
-
(Science for ceramic production)
-
Changes in the phase and chemical compositions, as well as the course of hardening during heating of mixtures with a phosphate binder of pyrophyllite raw materials from the Kul-Yurt-Tau deposit and for ...
-
15.
Sintering and crystallization processes in strontium-anortite ceramics production
-
(Glassceramics)
-
The processes of crystallization and sintering, occurring during firing, during the production of strontium-anorthite glass-ceramics by the method of powder technology, have been studied. The character ...
-
16.
Recycling technology of mineral fiber production from ashes and slag waste and combustible shale waste
-
(Utilization of waste)
-
The technology of utilization of ash and slag waste and waste of oil shale in the production of mineral fibers using an electroplasma installation for melting silicate-containing materials and a scheme ...
-
17.
Unbaked castable refractory phase composition formation at the heating-up service conditions temperature of glassmaking aggregates
-
(Refractories for glass production)
-
Comprehensive studies of the phase composition of refractory concrete compositions, heat-treated in various temperature ranges, including when the glass-melting units are put into operation, have been ...
-
18.
Temperature regimes of granulated material production for foam
-
(Science for glass production)
-
The temperature regimes of obtaining glass granulate, which is the initial raw material for glass-ceramic foam materials, are considered, depending on the composition of the charge and the nature of the ...
-
19.
Special features of glass heating using multipoint power source
-
(Science for glass production)
-
On the basis of the principle of superposition of wave addition, a mathematical model of the power distribution on the surface of a glass plate when it is heated with the help of tubular heaters is proposed. ...
-
20.
Formation of the surface layer of multi-component lead-silicate glass in hydrogen atmosphere upon heating
-
(Science for glass production)
-
The sequence of chemical transformations of elements of the surface layer of silicate glass of the system PbO - BaO - Na 2 O - Al 2 O 3 - SiO 2 when heated in a hydrogen atmosphere. The process ...
