-
1.
PRODUCTION OF GLASS FOAMS ON THE BASIS OF ROCKS
-
(Not-set)
-
The results of research on the production of granular and block foam glass materials based on widespread highly siliceous rocks and technogenic waste are presented. The main attention of researchers is ...
-
2.
Rostov region glass sands
-
(Raw materials)
-
The results of work on the search and study of glass sands in the Rostov region are presented. A description of the geological structure of the subsoil is given and the prospects of identifying deposits ...
-
3.
Bin glass batch mixers
-
(Equipment)
-
Various designs of hopper devices for glass batch mixers are considered. The factors influencing the shape, volume and number of the receiving bins of the mixers have been determined. The possibility of ...
-
4.
Features of return cullet lines development in glass containers production
-
(Equipment. Technology)
-
The features of designing a line of return cullet formed at the "hot" and "cold" ends in the production of glass containers are considered. Various options for the layouts of technological ...
-
5.
Phase transformations of silicon-aluminum-magnesium systems based on a precursor obtained by micellar technology [20-25]
-
(Science for ceramic production)
-
Phase transformations of model compositions of cordierite ceramics based on silicon dioxide synthesized by micellar technology have been studied by thermogravimetry, differential scanning analysis, and ...
-
6.
Batch components granulometry for efficient glass-making
-
(Science for glass production)
-
The analysis of the granulometric composition of the raw material components of the charge intended for high-performance glass melting has been carried out. It was found that the narrow-fractional composition ...
-
7.
Improvement of glass batch transporter lines
-
(Equipment)
-
The problems of transportation of glass batch over long distances are considered. A project for the reconstruction of flow lines for raw materials and glass batch in the production of float glass is presented. ...
-
8.
Expenditure accounting of own glass cullet stock in glassware production
-
(Equipment)
-
The features of accounting for the consumption of own cullet in the production of glass containers are considered. A possible version of the system for separate and general measurement of the mass of its ...
-
9.
The use of statistical analysis methods in regulating the process of glass batch preparation
-
(Efficiency and quality)
-
Some methods of statistical analysis used to control the quality of glass batch are considered, and factors influencing its temperature and humidity are determined. An assessment of the accuracy of the ...
-
10.
Design features of the glass batch transportation lines
-
(Automation and mechanization of production)
-
The features of designing lines for transporting glass batch from compound shops to glass-making furnaces are considered. Variants of schemes using aboveground and underground galleries are presented. ...
-
11.
Features of using vibratory feeders with
unbalanced electric drive for dosing of crumbling components of the glass charge
-
(Automation and mechanization of production)
-
The features of using vibrating feeders with an unbalanced electric drive for dosing bulk components of a glass batch are considered. Designs of vibrating feeders are presented that exclude the influence ...
-
12.
Assembly for supersized sheet glass transportation by railway cars
-
(Equipment)
-
The issues of safety of super-sized sheet glass of 6x; 3 m when transporting it in railway wagons. The design of an A-shaped transportation pyramid and a sealing shelter, consisting of a removable cap, ...
-
13.
Optimization of the control algorithm of batch charging in the glass melting tank
-
(Automation of production)
-
An algorithm for optimal control of charge loading into a glass-making furnace is considered, taking into account the possible use of partial doses of rejected charge. According to the results of the calculation, ...
-
14.
Special features of dosing and mixing of small components of the glass batch
-
(Automation and mechanization of production)
-
The features of dosing of glass melt decolorizers and preparation of premixes with various fillers (sand, soda, feldspar) on their basis are considered. An algorithm for dosing Se and CoO is proposed, ...
-
15.
Increase in the efficiency of vibration devices due to excitation of low-frequency resonance vibrations
-
(Automation and mechanization of production)
-
The issues of increasing the efficiency of vibration mechanisms due to the implementation of the mode of multiple Raman parametric resonance are considered. As a drive of the vibration mechanism, it is ...
-
16.
Extending of the glass-making sand base using low-charges technology
-
(Raw materials)
-
Even minor fluctuations (tenths of a percent) in the molten glass of such components as iron and aluminum oxides lead to serious changes in the rheological properties of the melt, heat transfer conditions ...
-
17.
Optimization of the batch charging in the glass-melting furnace
-
(Automation and mechanization of production)
-
The problems of deterioration of the quality of the charge during its storage and transportation are considered. Technical solutions have been proposed to optimize the loading of the charge and scrap into ...
-
18.
Statistical methods of monitoring and control in technology of the glass batch preparation
-
(Computerized monitoring systems)
-
Statistical methods of quality control of raw materials and glass batch supplied to enterprises are considered. An algorithm for statistical regulation of the batch preparation process is proposed. Tab. ...
-
19.
Modernization of the system controlling pneumatic transport of the raw components of the glass batch
-
(Automation and mechanization of production)
-
The modernized control system of pneumatic conveying of raw materials of glass batch produced by JSC "Stromizmeritel" is considered. A comparative analysis of various control schemes for the process ...
-
20.
Quality management system at the batch preparation shop
-
(Problems of quality)
-
The process model of batch preparation and the role of the quality management system in improving product quality are considered. Il. 3, bibliography: 1 title.
