-
1.
Optimization of the ash content (light fraction) in compositions of ceramic tiles
-
(Science for ceramic production)
-
Using the linear regression method, it was found that the optimal content of light fraction ash in the compositions of ceramic masses for the production of facade tiles from technogenic raw materials without ...
-
2.
Application of electroplating slime to production of ceramic pane tiles
-
(Utilization of waste)
-
The physical and mechanical properties of sludge from galvanic production have been studied. The possibility of their use as flux in the composition of ceramic masses is shown. Optimal charge compositions ...
-
3.
PHYSICAL AND MECHANICAL PROPERTIES OF CERAMIC TILE IN THE COMPOSITION CLAY–DUNE SAND
-
(Not-set)
-
The article investigates the physical, mechanical and technological properties of ceramic plates in the composition of Kulatau clay and dune sands of the Tuprakkala massif located in the lower amudarya ...
-
4.
The Influence of Nepheline Syenite and Waste of Mineral Wool Production on the Operational Properties of Ceramics
-
(Not-set)
-
The possibility of using wastes from the production of mineral wool (MB) and nepheline-syenite (NS) in the production of ceramics in order to improve the physical and mechanical properties of the samples, ...
-
5.
Study of the Influence of Nanotechnogenic Raw Materials and Pyrophyllite on Orientation of Clay Particles and Water Permeability of Acid Resistant Materials
-
(Not-set)
-
The use of nanotechnogenic aluminum-containing raw materials and pyrophyllite in the compositions of ceramic masses for the production of acid-resistant materials helps to reduce the shrinkage anisotropy ...
-
6.
Low-Temperature Co-Firable Ceramic Li2Zn3Ti4O12 with an Eutectic Additive in the Li2O-B2O3-SiO2 System
-
(Not-set)
-
In the Li 2 O-ZnO-TiO 2 system, a material has been developed for the technology of low-temperature co-firing of ceramics with a view to its use in the production of electronic components. The sintering ...
-
7.
Porosity Structure and Technical Properties of Ceramic Materials Based on Wastes of Nonferrous Metallurgy of Eastern Kazakhstan
-
(Not-set)
-
Clinker materials were obtained from non-ferrous metal waste, where the clay part of the tailings was used as the clay material. gravity of zircon-ilmenite ores (GZI), and feldspar concentrate (PShK) - ...
-
8.
Research Black Core and Bloating During Firing of Porcelain
-
(At the enterprises and institutes)
-
One of the reasons for the relatively low quality of dense ceramic materials (porcelain stoneware, facade tiles and floor tiles) due to the appearance of a black core is the presence of unburned coal particles ...
-
9.
Ceramic batch based on pyroxenite and low-melting clay
-
(Science for ceramic production)
-
The composition of low-shrinkage ceramics based on pyroxenite has been developed. The natural components used in the ceramic mass, including pyroxenite, low-melting clay, and additionally cullet, make ...
-
10.
Batch formulation for facing ceramics from Kazakhstan raw materials
-
(Science for ceramic production)
-
A study of aluminosilicate rocks used for facade ceramics is presented. The possibility of efficient use of oil shale, the reserves of which are significant in South Kazakhstan, is shown. The use of shale ...
-
11.
Ceramic finishing materials made of alumosilicates from Zabaikal'e regio
-
(Science for ceramic production)
-
The possibilities of obtaining aluminosilicate finishing materials for interior decoration of buildings and structures and facade tiles using the hyper pressing method are considered. The influence of ...
-
12.
Application of Mg-containing technogenic raw in production of ornamental ceramics
-
(Utilization of waste)
-
... man-made raw materials with satisfactory physical and mechanical properties - tiles for internal facing of walls and facades, tiles, ceramic bricks, and shingles. Tab. 2, ill. 3, bibliography: 1 title ...
-
13.
Using of Gzhel' polymineral clays in ceramic production
-
(Raw materials)
-
As a result of research and industrial tests, it was found that the clays of the Gzhel deposit can be used in the production of bricks, facade and floor tiles, as well as majolica, pottery, art, architectural ...
-
14.
Basalt-tuff ceramics
-
(Science for ceramic production)
-
The results of physicochemical and technological studies of basalt tuffs as a new type of raw material for the manufacture of building ceramics are presented. Tests carried out in production conditions ...
