-
1.
Aspects of energotechnological combination for recovery of secondary energy resources from kilns
-
(Energy saving)
-
The possibility of creating an energy-technological unit on the basis of a kiln for a more complete use of the resulting secondary energy resources, as well as the feasibility of using an exergy method ...
-
2.
Raw materials and pathways of increasing the efficiency of building ceramic production
-
(Raw materials)
-
The ways of increasing the efficiency of production of building ceramics - sanitary ware, facing tiles, etc. are shown. The effective use of the mineral resource base of the Urals is one of the ways to ...
-
3.
A STUDY OF THE EFFECT OF REPLACING ASH AND SLAG WASTE WITH DRILL CUTTINGS ON THE STRUCTURE AND PROPERTIES OF THERMAL INSULATION GEOPOLYMER MATERIALS
-
(Not-set)
-
The possibility of replacing bottom ash waste (ASW), which serves as the main raw material for the synthesis of such materials, with drill cuttings (DC) was investigated. It was found that DC, unlike ASW, ...
-
4.
ANTI-FILTRATION AND SORPTION CHARACTERISTICS OF OVERBURDEN ROCKS FOR RAW MATERIAL EXTRACTION FOR THE CEMENT INDUSTRY
-
(Not-set)
-
The article presents the results of determining the anti-filtration and sorption capacity of palygorskite and other clays of the Borshchevsky and Voskresensky cement raw material deposits, which are overburden ...
-
5.
STUDY ON THE FIRING TECHNOLOGY AND INFLUENCING FACTORS OF COPPER-BASED GREEN GLAZE IN JUN PORCELAIN IN CERAMIC INDUSTRIAL PRODUCTION
-
(Not-set)
-
Cu-series green glaze was prepared using raw materials such as kaolin, feldspar, calcite, talc, limestone, quartz, and copper oxide. This study investigated the effects of formulation composition and preparation ...
-
6.
GRINDING OF BIOGENIC SILICA
-
(Not-set)
-
The temperature regimes of the thermal extraction method for obtaining silicon dioxide from rice husk and various conditions of subsequent milling were investigated. Elemental, X-ray phase, petrographic ...
-
7.
LOCAL ELECTRIC FIELD ENHANCEMENT IN THE VICINITY OF Ag NANOPARTICLES AND THEIR AGGLOMERATES IN ZINC-PHOSPHATE AND SILICATE GLASS
-
(Not-set)
-
Based on calculations, spatial distribution of the local electric field (LEF) for various structural configurations of silver nanoparticles (NPs) in silicate and zinc-phosphate glasses was studied. The ...
-
8.
JOINT PROCESSING OF QUARTZ-LEUCOXENE CONCENTRATE AND BRUCITE CONTAINING WASTE FROM THE PRODUCTION OF REFRACTORY MATERIALS TO OBTAIN COMPLEX COAGULANTS
-
(Not-set)
-
The volumes of large-tonnage mineral waste generation cause serious concern from the side of environmental supervision. Most of the mineral waste is a valuable secondary raw material, but the lack of integrated ...
-
9.
PIEZOCERAMICS TECHNOLOGIES: APPROACHES FOR ENVIRONMENTAL IMPACT MITIGATION
-
(Not-set)
-
The functional ceramic materials are broadly used in the electronic industry. Many of them are comprised of ferroelectric materials because of their outstanding piezoelectric and dielectric properties. ...
-
10.
Optimizing Technological Regulation of Container Glass Manufacturing: Best Available Techniques, General Binding Rules and Carbon Intensity of Products
-
(Not-set)
-
... Russian BAT Reference Document on Glass Production and clarifying the technological parameters for resource efficiency and environmental performance of production. It is proposed to regulate the secondary ...
-
11.
Glass formation in material system quartz sand - colemanite - soda
-
(Science for glass production)
-
Complex studies of glass formation and determination of glass properties in the material system of materials quartz sand - colemanite - soda have been carried out. The possibility of using a multicomponent ...
-
12.
Research in electrodes with active layer of TiO2, RuO2, SnO2 oxides mixture
-
(Growth of the production efficiency)
-
Samples of electrodes with an active layer based on TiO 2 , RuO 2 , and SnO 2 oxides have been obtained. The physicochemical characteristics of the electrode surface have been determined. Their electrochemical ...
-
13.
Use of fiberglass in transport engineering
-
(Environmental protection)
-
The properties and advantages of fiberglass and carbon fiber reinforced plastics, as well as the directions of their use in the construction of vehicles are considered. The possibility of increasing the ...
-
14.
Glass melt heat recuperation by circulating flue gases
-
(RESOURCE SAVING)
-
The use of the heat of cooling of molten glass in the working ducts of the furnace for the production of container glass is considered. Intermediate heat carrier application? circulating flue gases? allows ...
-
15.
The use of computer-aided technologies in foamglass pore structure formation modeling
-
(Science for glass and ceramic production)
-
Optimal compositions for the synthesis of foam glass with the use of slag waste from thermal power plants have been developed? foam slag glass. Based on the experimental data, a program has been created ...
-
16.
Photoconverter with increased capacity energy storage system based on LiCoO2 and carbon materials
-
(RESOURCE SAVING)
-
As an energy storage device in autonomous photovoltaic systems, it is proposed to use a hybrid electrochemical storage device. The developed device combines the advantages of lithium-ion batteries and ...
-
17.
Reduction of specific air consumption in jet cooling systems of melting chamber refractory protection
-
(Equipment. Resourse efficiency)
-
Principles have been formulated and an applied method has been developed to substantiate rational parameters for air cooling systems of critical zones of the melting basin of glass-making furnaces, which ...
-
18.
Industrial experience in redyeing glass melts from slag batches
-
(Science for glass production)
-
The modes of repainting of glass melt in industrial furnaces of "Chagodoshchensky Glass Factory and Co." Ltd. operating on slag charges are analyzed. It is shown that the efficiency of the process ...
-
19.
Batch components granulometry for efficient glass-making
-
(Science for glass production)
-
The analysis of the granulometric composition of the raw material components of the charge intended for high-performance glass melting has been carried out. It was found that the narrow-fractional composition ...
-
20.
Prospects for implementing best available techniques and integrated permits in glass and ceramics production (a review)
-
(Environmental protection)
-
The analysis of the prospects for the introduction of the best available technologies at enterprises producing glass and ceramics in Russia. The modernization of the factories has contributed to the improvement ...
