-
1.
SYNTHESIS OF MARBLITE IN A PLASMA GLASS FURNACE
-
(Not-set)
-
The possibility of using waste from the enrichment of ferruginous quartzites of KMA and waste from vanadium production for the plasma synthesis of marblite and structural elements of a plasma glass furnace ...
-
2.
ENERGY- AND RESOURCE-SAVING PLASMA TECHNOLOGY FOR GLAZING OF AUTOCLAVE-HARDENED BUILDING MATERIALS
-
(Not-set)
-
An energy- and resource-saving plasma technology for glazing autoclaved building materials has been developed. It has been established that the introduction of colemanite into the initial charge makes ...
-
3.
SYNTHESIS OF EFFECTIVE SILICATE MATERIALS BASED ON WASTE FROM THE ENERGY INDUSTRY
-
(Not-set)
-
Describes a method for determining the physico-mechanical properties of a synthesized batch of propants. Industrial waste is one of the sources of anthropogenic impact on the environment on a global scale, ...
-
4.
INORGANIC FOAMED THERMAL INSULATION MATERIALS BASED ON MINERAL SILICA-CONTAINING RAW MATERIALS
-
(Not-set)
-
Thermal insulation and composite foamed inorganic materials with a reduced thermal conductivity of 0,064…0,076 W/(m·K) have been developed on the basis of technogenic silica-containing raw materials. The ...
-
5.
PHYSICAL AND MECHANICAL PROPERTIES OF CERAMIC TILE IN THE COMPOSITION CLAY–DUNE SAND
-
(Not-set)
-
The article investigates the physical, mechanical and technological properties of ceramic plates in the composition of Kulatau clay and dune sands of the Tuprakkala massif located in the lower amudarya ...
-
6.
ELECTROTECHNICAL PORCELAIN BASED ON RAW MATERIALS OF UZBEKISTAN
-
(Not-set)
-
The paper presents the results of the research on the production of electrical porcelain on the basis of available traditional raw materials of Uzbekistan. It is shown that in conditions of a shortage ...
-
7.
APPLICATION OF THERMAL PLASMA ENERGY FOR PRODUCING GLASS-CRYSTALLINE MATERIALS
-
(Not-set)
-
The characteristics of glass-ceramic materials obtained using thermal plasma have been studied. The effect of TPP ash on the properties of glass-ceramic materials should be taken into account. Samples ...
-
8.
INVESTIGATION OF THE STABILITY OF THE LUMINESCENT CHARACTERISTICS OF PHOSРHORS OF DIFFERENT NATURE UNDER THE CLIMATIC CONDITIONS OF SOUTH-EAST ASIA
-
(Not-set)
-
Luminescent films were obtained by the capillary method on the basis of inorganic, organometallic, and hybrid organic-inorganic powder materials. The films were deposited on surfaces of various nature ...
-
9.
PRODUCTION OF GLASS FOAMS ON THE BASIS OF ROCKS
-
(Not-set)
-
The results of research on the production of granular and block foam glass materials based on widespread highly siliceous rocks and technogenic waste are presented. The main attention of researchers is ...
-
10.
THE USE OF ALUMINUM-CONTAINING WASTE FROM THE PRODUCTION OF METALLIC CHROMIUM TO CREATE ACID-RESISTANT TILES
-
(Not-set)
-
The use of aluminum-containing slag from the production of metallic chromium in an amount of 40 % allows to obtain acid-resistant tiles with high physical, mechanical and chemical parameters at a firing ...
-
11.
PROPANTS BASED ON DRILLING SLURRIES
-
(Not-set)
-
The work is devoted to the study of the impact of drilling waste on the ecological system, types of drill sludge recycling, the possibility of using drill sludge from the Morozovskoye deposit (Russia) ...
-
12.
ASPECTS OF OBTAINING HOMOGENEOUS DENSE CERAMICS FROM NON-SCARCE RAW MATERIALS
-
(Not-set)
-
The combined effect of the microwave field and the content of reinforcing medium-dispersed silicon carbide particles on the density of a ceramic material based on montmorillonite containing clay of the ...
-
13.
STUDY OF THE POSSIBILITY OF OBTAINING THERMAL INSULATING MATERIALS USING ASH WASTE
-
(Not-set)
-
The possibility of obtaining inorganic block heat-insulating foams based on silica and ash-containing man-made waste is considered. The influence of modifying additives and technological modes on the structure ...
-
14.
COMPOSITION, STRUCTURE AND PROPERTIES OF LOW-TEMPERATURE FIRING PORCELAIN
-
(Not-set)
-
The article describes the mechanisms of formation of the structure of low-temperature porcelain with the use of new non-traditional raw materials. As a result of the research, it was found that the formation ...
-
15.
THE USE OF TECHNOGENIC METALLURGICAL RAW MATERIALS FOR THE PRODUCTION OF CERAMIC MATERIALS WITH AN ANORTHITE PHASE
-
(Not-set)
-
Studies have been carried out on the topic of obtaining ceramic materials for construction purposes with an anorthite phase. Clay and blast-furnace gas cleaning sludge were used as raw materials. The chemical ...
-
16.
CERAMIC TILE BASED ON LOCAL HYDROMICA CLAY AND PEGMATITE DUST REMOVAL WASTE
-
(Not-set)
-
The goal of the present contribution is to study the possible use of local clay of hydromica type for facing tile production. Pegmatite dust removal waste from the Chupa Milling and Dressing Factory was ...
-
17.
CERAMICS BASED ON FLUORINATED TALC
-
(Not-set)
-
A dense-sintered protoenstatite ceramics based on fluorinated talc was obtained. Influence of BaO and Al2O3 additives on the sinterability, structure and strength of ceramics was investigated. It makes ...
-
18.
On the Issue of Crystallization of Mullite in the Synthesis of a Ceramic Composite Material Based on it
-
(Not-set)
-
The process of crystallization of mullite during the synthesis of a ceramic composite material “mullite – zirconium oxide” obtained from a two-phase gel by a method combining co-deposition and sol-gel ...
-
19.
Influence of Mineral Additives on the Structure and Properties of Thermal Insulating Materials Based on Silica-Containing Raw Materials
-
(Not-set)
-
The article presents a justification for the production of plate heat-insulating foam silicate materials based on by-products of apatite-nepheline ore processing by low-temperature technology. Methods ...
-
20.
The Prospects for the Use of Clay Raw Materials From the "Krupeisky Sad" Deposit For Obtaining Heat-Resistant Ceramic Product
-
(Not-set)
-
The complex study of the mineralogical and chemical composition, as well as the technological properties of clay from the “Krupeisky Sad” deposit of the Republic of Belarus, was carried out. The features ...
