-
1.
INFLUENCE OF CONDITIONS AND MODES OF MIXTURE PREPARATION ON THE STRUCTURE AND STRENGTH OF SULFUR CONCRETE
-
(Not-set)
-
One of the main disadvantages of sulfur concrete is the formation of a crack defect when cooled in metal molds. The proposed way of using sequential addition of components, temperature control at the entire ...
-
2.
MODIFIED AlF3 AND LiF OXYFLUORIDE LITHIUM-SILICATE SCINTILLATION GLASS FOR NEUTRON DETECTION
-
(Not-set)
-
Lithium-silicate scintillation glasses doped with rare earth ions are promising materials for neutron detectors. Oxyfluoride glasses, due to modification by fluorine, have improved spectral and mechanical ...
-
3.
TESTING POLYMER COATINGS FOR THE PURPOSES OF RESTORING AND REPAIRING CONCRETE STRUCTURES AT THE YAKUTSK CLIMATE STATION
-
(Not-set)
-
The adhesion properties of polyurethane- and polyurea-based polymer coatings designed to protect concrete were studied under the climatic conditions of Yakutia. Coated concrete samples were exposed to ...
-
4.
LASER FORMATION OF LUMINESCENT TRACKS IN BISMUTH-DOPED NANOPOROUS GLASS
-
(Not-set)
-
The formation of microtracks in the volume of porous glass samples by femtosecond laser pulses which is of importance for laser writing of active optical waveguides was studied. It was found that impregnation ...
-
5.
METHOD FOR ELIMINATION OF FLATNESS DEFECTS ON GLASS PLATES FOR THEIR THERMAL JOINING
-
(Not-set)
-
A method has been developed to eliminate gaps between glass plates during thermal bonding using a system for distributing the mechanical load. Theoretical and experimental studies of the proposed method ...
-
6.
Influence of Copper (II) Oxide on Microstructure and Phase Trans-formations of Bismuth Orthoniobate
-
(Not-set)
-
The microstructure and phase transformations of copper-doped BiNbO 4 ceramics synthesized at 950 and 1100 & # 176; C are investigated. According to XRD data, samples in a compact, pressed form crystallize ...
-
7.
Chemical, Phase Compositions and Structure of the Porosity of Bricks of the White Tower (Greece) is Older than 450 Years
-
(At the enterprises and institutes)
-
The increased carbon content (9.59 & # 37;) in the inclusions indicates the introduction of fuel into the raw material, which increases the porosity of the products and contributes to the uniform sintering ...
-
8.
Nanoporous glass with controlled pore size for high performance oligonucleotides
synthesis
-
(Science for glass production)
-
The results of the development of powdered nanoporous glass (NPS) with a controlled pore size for solid-phase synthesis of oligonucleotides with an increased product yield are presented. By varying the ...
-
9.
Element and phase composition and porous structure of millennia-old ceramic samples from Champa tower (Vietnam)
-
(At the enterprises and institutes)
-
Elemental analyzes of ceramic samples over 1000 years old showed that the main chemical elements are, & # 37 ;: for samples: the outer part of the bricks: 24.45 Si; 14.31 Ca; 12.68 C; 11.55 Al; 5.60 Fe; ...
-
10.
Influence of pigments on the properties of the colored slips for porcelain production
-
(Science for ceramic production)
-
The effect of the introduction of different types of ceramic pigments into the slip on the change in its properties has been studied. Pigments have an emaciating effect on the slip and increase the rate ...
-
11.
Effect of nanosized petrochemical waste with high alumina content on clinker heat resistance
-
(Science for ceramic production)
-
Studies have shown that it is advisable to use high-alumina nanotechnological raw materials as a softener to increase the thermal stability of clinker bricks. With an increase in the compositions of the ...
-
12.
Adjusting the strength of ceramics during fabrication process
-
(Science for ceramic production)
-
The mechanism of forming the strength of a casting ceramic mold is shown. The schemes of the arrangement of the binder composition between the solid components are considered. Various options for the destruction ...
-
13.
Reduction of the probability of pinhole formation in cobalt feldspathic glazes used in porcelain production
-
(Science for ceramic production)
-
The use of pegmatite of the Chupinskoye deposit with admixtures of mica for the production of porcelain glaze may cause the formation of a "prickly" glaze defect. It was found that the introduction ...
-
14.
Chemically and thermally paired synthesis of silicon nitride based composites using ferrosilicon
-
(Science for ceramic production)
-
The results of the synthesis of composite materials based on silicon nitride, which were discussed from the standpoint of chemical and (or) thermal conjugation, are presented.
The synthesis of silicon ...