-
1.
ASSESSMENT OF THE EFFECT OF LITHIUM CHLORIDE ON THE PROPERTIES OF BOROPHOSPHATE GLASS DURING THE IMMOBILIZATION OF RADIOACTIVE WASTE FROM PYROCHEMICAL PROCESSING OF SPENT NUCLEAR ...
-
(Not-set)
-
The paper presents the results of the studies of a matrix based on borophosphate glass (BFS) with the addition of lithium chloride as a simulator of spent electrolyte, a type of radioactive waste formed ...
-
2.
Production of ceramic materials based on SiC with low-melting ox-ide additives
-
(Science for ceramic production)
-
Dense materials based on silicon carbide were obtained by liquid-phase sintering. The oxides MgO, Y 2 O 3 and Al 2 O 3 , corresponding to the composition of yttrium-aluminum garnet, were used as ...
-
3.
Glassware forming (a review)
-
(Science for glass production)
-
Various methods of forming glassware, their physicochemical and technological features are considered. At the same time, the structural and deformation characteristics of glass-forming melts, the performance ...
-
4.
Improvement of energy efficiency in glass container production by use of mineral raw materials
-
(Science for glass production)
-
Is it possible to reduce energy consumption in the production of glass containers by reducing the melting temperature of glasses by partially replacing traditional raw materials with alternative silicon-containing ...
-
5.
Yachevskii Optimization of physical and chemical processes upon glass batch preparation and assessment of the humidity effect on the efficiency of glass melting
-
(Science for glass production)
-
The analysis of physical and chemical processes and individual factors affecting the homogeneity of the charge both when mixing the components of the charge in the mixer of the compound shop, and during ...
-
6.
Low-temperature synthesis of the quenched cullet from the silica-based batch in production of foam materials
-
(Science for glass production)
-
The possibility of obtaining glass granulate as an intermediate product for glass-ceramic foam materials based on widespread silica components (marshallite, diatomite, flask) at temperatures not exceeding ...
-
7.
Process features of using marshallite in container glass production
-
(Science for glass production)
-
The results of the study of the possibility of using the marshallite of the Elbashinsky deposit in the production of container glass are presented. The physicochemical characteristics of marshallite and ...
-
8.
Procedure of the uniform glass batch production
-
(Science for glass production)
-
A method is proposed for obtaining a chemically homogeneous glass batch by introducing fine and hygroscopic raw materials in the form of microgranules into its composition, followed by compaction of the ...
-
9.
Using of granulated raw concentrates in glass technology
-
(Raw materials)
-
The possibilities of using substandard raw materials in the form of granular raw concentrates in glass technology have been investigated. It has been established that the use of granular raw concentrates ...
-
10.
Using of natural soda from Mikhailoivskoe deposit in production of building glass
-
(Raw materials)
-
The fundamental possibility of using natural soda for partial replacement of traditional soda-containing raw materials in the technology of sheet and other types of glass has been established. The physicochemical ...
-
11.
Detonation synthesis of f.c.c. cuprite
-
(Science for ceramic production)
-
When the detonation products of C 4 H 4 N 8 O 14 interact with copper, tenorite and a previously unknown modification of cuprite with face-centered cubic lattice with a = 12.078 E. X-ray diffraction ...
-
12.
Using of unconventional types of raw materials with allowance for their redox properties
-
(Raw materials. Utilization of waste.)
-
The possibility of using unconventional raw materials as substitutes for sand and soda in the production of container glass, taking into account their redox characteristics, has been investigated. It has ...
-
13.
Phase transformations in wetted glass batches upon compaction
-
(Science for glass production)
-
The character of phase transformations in glass mixtures at all stages of their preparation, including moistening, compaction and drying, has been studied, and criteria for evaluating the formability of ...
-
14.
The effect of protecting gas atmosphere on the reduction potential of the melt tank
-
(Science for glass production)
-
A method is considered, the use of which makes it possible to reduce tin oxides in the low-temperature part of the molten bath, where they are predominantly formed. On the basis of experimental data, a ...
-
15.
Methods of obtaining safety (protecting) atmosphere used upon float-glass production
-
(Science for glass production)
-
Based on the analysis of patent information, scientific and technical literature and developments of the Saratov Institute of Glass, a classification of protective nitrogen-hydrogen atmospheres by methods ...
-
16.
The effect of gas atmosphere on the physicochemical processes of float-glass formation
-
(Science for glass production)
-
Based on the analysis of patent information, scientific and technical literature and developments of the Saratov Institute of Glass, the influence of the gas environment on the physical and chemical processes ...
-
17.
Modern history of the Krasnoe Ekho Glass Works development
-
(Information)
-
-
18.
The effect of additives and admixtures in tin on oxidation and incorporation of tin into bottom surface of the float glass
-
(Science for glass production)
-
Based on the analysis of patent information, scientific and technical literature and developments of the Saratov Institute of Glass, the influence of additives and impurities in tin on the quality of float ...
-
19.
Physicomechanical properties of aspirated dust in production of ceramic pigments
-
(Environmental protection)
-
The conditions of formation and physical and mechanical properties of dust emissions, formed in the production of ceramic pigments, have been investigated. Practical recommendations are given. Tab. 1, ...
-
20.
Functional duty of the slag camera and its design
-
(Science for glass production)
-
The design of the slag chamber and its purpose in the process of forming float glass are considered. The development of the Saratov Institute of Glass - a device for supplying a protective atmosphere to ...
