-
1.
Physico-chemical properties of low-melting phosphate glasses in relation to tin content
-
(Science for glass production)
-
The effect of SnO on the physicochemical properties of low-melting glasses of the Li 2 O-SnO-P 2 O 5 (LSP) system intended for use in compositions for vacuum-tight low-temperature joining of various ...
-
2.
Particularities of bismuth ions structural state in bismuth-borate glasses
-
(Science for glass production)
-
Presented are the properties and graphical dependences of the properties of bismuth borate glasses in a wide range of compositions? molar content from 20 to 80 & # 37; Bi 2 O 3 . In multi-bismuth glasses, ...
-
3.
Structure and properties of bismuth-borate glasses
(review)
-
(Science for glass production)
-
Generalized information on the structure of alkaline-borate compounds and glasses is presented, as well as data on the study of the properties and structure of bismuth borate compounds and glasses based ...
-
4.
Phase and glass formation, and properties of glasses in BаO - Bi2O3 - B2O3 system
-
(Science for glass production)
-
Information on phase formation and glass formation in bismuth borate systems as a basis for obtaining lead-free fusible glasses with a wide range of changes in physical and optical characteristics is generalized. ...
-
5.
Development of the low-melting glasses composition based on bismuth-borate system
-
(Science for glass production)
-
The results of studying the properties of low-melting lead-free glasses obtained on the basis of the system ZnO - Bi 2 O 3 - B 2 O 3 with additional introduction K 2 O, Al 2 O 3 and SiO ...
-
6.
Fusible low-lead borate-based glass systems
-
(Science for glass production)
-
The results of experimental studies on the production of low-melting glasses with a reduced lead oxide content for silicate paint fluxes based on two borate systems, which have not been studied before, ...
-
7.
GLASSY FUNCTIONAL FILLERS OF GLASS IONOMER CEMENTS IN THE SrO–Al2O3–P2O5–SiO2–F SYSTEM
-
(Not-set)
-
... is due to the presence of the absorbing component of the glass filler - oxide and strontium fluoride, which are introduced into the glass together. The use of fusible fluorine-containing raw materials ...
-
8.
Formation of Surface Conducting Open Conductors on Glass with Electrically Conducting Coating by Gas-Dynamic Method
-
(Not-set)
-
Using the example of glass of composition 15Na 2 O * 10CaO * 75SiO2, the possibility of forming current-carrying buses on an electrically conductive coating by the & # 171; cold & # 187; gas-dynamic ...
-
9.
Method of quartz rigging processing in micro- and nano-electronics production
-
(At the enterprises and institutes)
-
Investigations of the effect of various methods of processing quartz tooling in order to completely remove sparingly soluble films of borosilicate and phosphorosilicate glasses have been carried out. It ...
-
10.
Lead titanate batch composition influence on thermal expansion coefficience of low-melting glass materials for corundum leak-tight low-temperature soldering
-
(At the enterprises and institutes)
-
The influence of the granulometric parameters of crystalline lead titanate on the thermal expansion coefficient of soldering glass compositions used for low-temperature vacuum-tight soldering of corundum ...
-
11.
Aspects of formation of titanium glaze coatings for floor tiles
-
(Coatings)
-
The efficiency of using titanium dioxide as a muffler for obtaining glass-crystalline wear-resistant semi-fritted glaze coatings of floor tiles with the required physicochemical and operational characteristics ...
-
12.
Synthesis of polyphosphate glass
-
(Science for glass production)
-
Multicomponent spatially crosslinked polymers based on ultraphosphates with a glass transition temperature of 123 - 302 ° C have been synthesized. Their hydrolytic stability (the rate of weight loss during ...
-
13.
Study of the possibility of high-lead glass substitution in low-melting solder-glass with low toxic components
-
(Science for glass production)
-
The possibility of partial or complete replacement of PbO in low-melting glass solders with less toxic components has been investigated. It was found that in systems PbO - P 2 O 5 - ZnO - B 2 O ...
-
14.
Low-melting glass based on lead-borate systems
-
(Science for glass production)
-
The state of the art in the development of low-melting glasses, used, in particular, as fluxes for the production of silicate paints, is analyzed. The results of developments and patent data in this area ...
-
15.
Formation of low-temperature seals
and coatings based on lead-tellurium glass
-
(Coatings. Seals.)
-
The process of formation of solders and coatings based on fusible lead-tellurite glasses has been studied. The results of X-ray microanalysis on the distribution of elements in glass-aluminum and glass-quartz ...
-
16.
Phase composition and structure of the composition aluminum - coating
-
(Coatings. Enamels.)
-
Low-melting enamel coatings for household utensils from aluminum have been synthesized. The possibility of the formation of fusible glasses in the R 2 O-Al 2 O 3 - B 2 O system has been investigated ...
-
17.
Oxide glass-based nonlinear optic nanocomposites
-
(Science for glass production)
-
The first nonlinear optical nanocomposite based on a fusible glassy matrix and a ferroelectric crystal has been obtained. Lead-borate glasses were used as a matrix, and a single-phase ferroelectric powder ...
-
18.
Synthesis of colored glaze coating on the base of metadiabases
-
(Science for glass and ceramic production)
-
Research has been carried out on the synthesis of colored non-pigment fusible glazes based on metadiabases of Belarus. The temperature-time conditions for the formation of high-quality glaze coatings have ...
