-
1.
INVESTIGATION OF THE STRUCTURAL ADSORPTION PROPERTIES OF A COMPOSITE BASED ON MOLYBDENUM NANOPARTICLES IN A ZEOLITE MATRIX
-
(Not-set)
-
The results of the study of the structure and adsorption properties of the Mo/zeolite composite obtained by enriching the zeolite of the Chuguevsky deposit of Primorsky Krai with Mo nanoparticles followed ...
-
2.
Microstructure Features of Cermet Based on Thermoelectric Bismuth Telluride Matrix and Ferromagnetic Filler
-
(Not-set)
-
... Bi2Te3 (a matrix of the composite), and ferromagnetic filler) Ni or Fe). It was found that under spark plasma sintering, the filler inclusions are forming as locally-gradient shell–core inclusions (Ni@NiTe2 ...
-
3.
Glass Layer Forming in Ceramic Matrix Composite after Impact of High-Enthalpy Flow
-
(Not-set)
-
The structure of the surface layer of ceramic composite materials (CMC) of the compositions HfB 2 & # 8211; SiC and SiC & # 8211; TiC after exposure to a flow of dissociated air has been investigated. ...
-
4.
Properties of stereolithography-produced composite with calcium phosphate filled polymer matrix for ceramics with defined porous space architecture
-
(Biomaterials)
-
A study of the process of removing the organic component from composites (photopolymer / calcium phosphate) of complex architecture, obtained by 3D printing for the creation of personalized bioceramic ...
-
5.
Phase composition in core-shell transition layer in matrix structure of construction ceramics made from lean raw materials with clay addition
-
(Science for ceramic production)
-
The process of the proposed technology for the formation of a transition layer between the dispersion medium and the dispersed phase of a ceramic matrix composite is investigated, and a technique for the ...
-
6.
3D-matrix based on bioactive glass and calcium phosphates with tailored resorbtion for bone tissue replacement.
-
(Biomaterials)
-
A 3D matrix was obtained based on a sintered composite material made of bioactive glass and dicalcium phosphate dihydrate. The regularities of the influence of the ratio of the mixture components and the ...
-
7.
Interaction of glass fiber with paste matrix
-
(At the enterprises and institutes)
-
The results of studies of the processes of interaction of fiberglass used for dispersed reinforcement of concrete with cement stone are presented. It was found that the nature of the interaction depends ...
-
8.
Filter-separator for ferrous admixtures in ceramic slurries. Magnetic field in matrix pores
-
(Equipment)
-
The perspective application of magnetic filter-separators with a filtering matrix for cleaning ceramic suspensions is considered. The previously absent characteristics of the relative strength and induction ...
-
9.
Constructional glass and ceramic matrix high temperature composites for advanced aviation systems
-
(At the enterprises and institutes)
-
The perspective high-temperature glass-ceramic and ceramic composite materials developed at VIAM, which are distinguished by their ability to retain properties at high temperatures in an oxidizing environment, ...
-
10.
Solid-phase processes in the ceramic matrix of the system SiO2 - Al2O3 - TiO2 added with fibrous nanostructured alumina
-
(Science for ceramic production)
-
The process of formation of composite ceramics based on the SiO 2 - Al 2 O 3 - TiO 2 system with the addition of nanostructured powders has been investigated ? - and ?-Al 2 O 3 during heat ...
-
11.
Protective coatings for ceramomatrix C/SiC-like composites
-
(Coatings)
-
Changes in the compositions of thermal protective and antioxidant coatings for composite materials based on C / SiC are considered. Data on the compositions and properties of two-, three- and multilayer ...
-
12.
Waste-based ceramized glass matrix for heat-resistant coatings
-
(Coatings. Enamels.)
-
An effective solution to the problem of synthesis of glass composite heat-resistant coatings with a sitall structure, intended for protection against high-temperature corrosion of expensive and scarce ...
-
13.
Developing of the glass matrix composition for light heat-resistant pyroceram coating of nichrome alloys
-
(Enamels)
-
... glasses were determined, the features of the structure and phase formation of sitallized glass matrices were studied. An optimal composition has been established that can be used as a glass matrix for ...
-
14.
Developing of the glass matrix composition of white low-melting enamel for steels
-
(Enamels)
-
... glasses on the amount of SiO 2 , B 2 O 3 and R 2 O and their ratio. The composition of the glass matrix used as a white enamel to protect steel facing plates and give them a good decorative appearance ...
-
15.
THE EFFECT OF ZIRCONIUM DIOXIDE NANOPARTICLES ON THE PROPERTIES OF CORUNDUM CERAMICS BASED ON RUSSIAN RAW MATERIALS
-
(Not-set)
-
The effect of various concentrations of zirconium dioxide nanoparticles on the strength and porosity of corundum ceramics obtained from domestic raw materials has been studied. The effect of an additive ...
-
16.
ELECTRON-BEAM POWDER SURFACING OF Al2O3 ONTO TITANIUM IN THE FORE-VACUUM PRESSURE RANGE WITH PRELIMINARY POWDER DEGASSING
-
(Not-set)
-
The results of producing an Al2O3 composite coating on titanium by electron-beam cladding in the forevacuum pressure range (3…30 Pa) are presented. The microstructure, phase composition, and mechanical ...
-
17.
EVALUATION OF THE PROPERTIES OF FUNCTIONAL-GRADIENT CERAMIC MATERIALS OBTAINED BY THE METHOD OF CO-REACTION SINTERING
-
(Not-set)
-
... bonded by a continuous silicon carbide matrix through a reaction-diffusion mechanism. Structural characterization and physicomechanical testing of the multilayer ceramics were performed on prototype samples. ...
-
18.
ALUMINOBOROSILICATE GLASS FOR VITRIFICATION OF PERLITE-CONTAINING MATERIALS
-
(Not-set)
-
The aluminoborosilicate glass of basic composition was tested for the perlite-containing materials syntheses. The influence of the proportion of perlite filter powder in the initial mixture on the composition, ...
-
19.
ELECTRON BEAM SINTERING OF ALUMINA-BASED COMPOSITE CERAMICS WITH COPPER ADDITION IN THE FORE-VACUUM PRESSURE RANGE
-
(Not-set)
-
The effect of electron-beam sintering in the fore-vacuum pressure range (8…10 Pa) on the density, structure, and phase composition of the sintered Al2O3–Cu composite with a component mass ratio of 10:1 ...
-
20.
FABRICATION OF TRANSPARENT QUARTZ GLASS USING ADDITIVE TECHNOLOGIES
-
(Not-set)
-
... the composite makes it possible to destroy agglomerates of SiO2 nanoparticles and achieve a more uniform distribution of them in the organic matrix, significantly reducing the sintering temperature. Optimal ...
