-
1.
STRUCTURE AND ELECTRICAL PROPERTIES OF MULTILAYER CERAMIC MATERIALS BASED ON MODIFIED POTASSIUM POLYTITANATES
-
(Not-set)
-
Some ceramic materials formed by sintering layered green bodies formed the compacted powders of the basic potassium polytitanate and this one modified with Mn compound are produced and investigated. Using ...
-
2.
The Influence of Molarity and Temperature of the Alkaline Activator Solution on the Rheological Properties and Structure Formation of Alkaline Activated Refractory
Materials
-
(Not-set)
-
The effect of molarity (from 3.64 to 1.74 M) of a solution of an alkaline activator (ALA) and temperature (from 10 to 20 ° C) of a mixture of alkali-activated materials (ALA) based on chamotte and metakaolin ...
-
3.
Influence of SiO2/Al2O3 ratio on structure, properties and heat resistance of geo-polymer refractory materials
-
(At the enterprises and institutes)
-
A study of the properties of lightweight geopolymer materials (GM) based on refractory technogenic waste of aluminosilicates has been carried out. The effect of the ratio of oxides SiO 2 and Al 2 O ...
-
4.
GLASS-LIKE CARBON FROM SUPERCRITICAL FLUID IN THE C–O–H SYSTEM AT TEMPERATURE 800 ?C AND PRESSURE 500…1000 ATM
-
(Not-set)
-
The paper presents the results of experimental modeling of glass-like carbon synthesis from high pressure supercritical fluid in the C–O–H system at temperature 800 °C and pressure 500…1000 atm. A full ...
-
5.
INVESTIGATION OF THE CONDITIONS OF CERAMIC AND MECHANOCHEMICAL SYNTHESIS OF COMPOSITES CuO/ZnO/?-Al2O3
-
(Not-set)
-
In this work, using the methods of X-ray phase, X-ray diffraction, synchronous thermal analysis, scanning electron microscopy, low-temperature adsorption-desorption of nitrogen, the process of obtaining ...
-
6.
HIGH-TEMPERATURE CERAMOVERMICULITE THERMAL INSULATION ON A WOLLASTONITE BUNDLE
-
(Not-set)
-
Ceramovermiculite thermal insulation on a wollastonite bundle was obtained from chalk, diatomite and expanded vermiculite by the method of solid-phase synthesis of components. The influence of the granulometric ...
-
7.
OXIDE-CONTAINING MINERAL FIBERS: TYPES, METHODS OF PRODUCTION, APPLICATION AND MANUFACTURERS (REVIEW)
-
(Not-set)
-
The article provides an overview of mineral oxide fibers of various chemical composition: aluminosilicate, alumina, silica, bio-soluble, zirconium oxide fibers and others. Methods for producing discrete ...
-
8.
New Method for Calculating Structural Parameters of Glass Membranes
-
(Not-set)
-
A new method for calculating the structural parameters of glass membranes is proposed, which allows calculating the average coordination number, specific surface area, average radii of the necks of spherical ...
-
9.
Composites Based on Zeolitesmodifiedby Cu Nanoparticles
-
(Raw materials)
-
The results of studies of the physical properties of a Cu / zeolite composite based on zeolite raw materials from the Kulikovskoe deposit in the Amur region are presented. To obtain the composite, the ...
-
10.
Estimation of the Structural Parameters of the Glass Membrane
-
(Science for glass production)
-
Structural parameters of glass membranes are analyzed depending on their porosity on a model of non-intersecting tortuous capillaries commonly used by specialists, and it is shown that the expression for ...
-
11.
Methods for producing ceramics from metal nitrides (a review)
-
(Science for ceramic production)
-
The main methods of obtaining metal nitrides are considered. The main advantages and disadvantages are highlighted for each method. The possibilities of using these materials in various industries are ...
-
12.
Properties of SiO2-СаO-P2O5-TiO2 based materials obtained by a sol-gel method
-
(Biomaterials)
-
Sol-gel method synthesized thin films based on the SiO 2 -CаO-P 2 O 5 -TiO 2 system ... The properties of the material were investigated by methods of infrared spectroscopy, X-ray phase analysis, ...
-
13.
Non-shrink facer based on glass waste and colemanite
-
(Utilization of waste)
-
An energy-saving technology of a non-shrinkable facing material is proposed and tested, which is based on the imposition and zeroing of two opposite deformation effects during sintering: volumetric shrinkage ...
-
14.
Foam-glass made from mechanoactivated wedge ceolite rock
-
(Science for glass production)
-
... crushed rock or by adding flask rock to alkaline zeolite-containing compositions. At the same time, the macro- and microporous structure of the foam obtained from the usually crushed rock in a rod mill ...
-
15.
Structural changes in porous glasses densified by laser radiation in cold and heated environment
-
(Science for glass production)
-
A comparison of structural changes in porous glass that occur during thermal and "cold" compaction under the action of laser radiation is presented. Changes in the modified regions of different ...
-
16.
Diatomite - silica material for glass industry
-
(Raw materials)
-
The results of X-ray phase, differential thermal, thermogravimetric, infrared spectroscopic analyzes of diatomite from the Inzenskoye deposit are presented, as well as the results of experimental cooking ...
-
17.
Characteristics of mullite-zirconia ceramics obtained from powders synthesized by hydrothermal method
-
(Science for ceramic production)
-
The influence of the hydrothermal method for the synthesis of initial powders using chemical reagents and illite clay as initial components on both the phase composition and structure and some properties ...