-
1.
Application of Granulometry for Rapid Assessment of the Operational Properties of Acid-Activated Sedimentary Rocks
-
(Not-set)
-
... effect of acid treatment on the adsorption-structural characteristics of diatomite. We showed the possibility of using of granulometry for a rapid assessment of the operational properties of acid-activated ...
-
2.
The Influence of Nepheline Syenite and Waste of Mineral Wool Production on the Operational Properties of Ceramics
-
(Not-set)
-
The possibility of using wastes from the production of mineral wool (MB) and nepheline-syenite (NS) in the production of ceramics in order to improve the physical and mechanical properties of the samples, ...
-
3.
Technological Features
of Production and Assessment of the Main operational Properties
of Proppants Used in Oil and Gas Production by Hydraulic Frac-turing
-
(Not-set)
-
The results of studies of the structure, phase composition, mechanical and chemical properties of aluminosilicate, magnesia-quartz and glass-ceramic proppants (RosProp, BorProp, ForeRCP, Wauli, etc.) are ...
-
4.
The Influence of Modification of Polyurea with Glass Microspheres on its Operational Properties
-
(Not-set)
-
Modification of polyurea with glass microspheres has been carried out. Polyurea compositions of coatings based on them have been obtained. Their properties are assessed. The results of studying the compositions ...
-
5.
ANTIBACTERIAL PROPERTIES OF BOROSILICATE ENAMEL WITH NANOSCALE ZINC OXIDE PARTICLES
-
(Not-set)
-
Glass-enamel coatings have been modified with nanosized particles, which expands the scope of their application and is a promising direction. It has been established that the introduction of nanosized ...
-
6.
Plasma-Sprayed Ceramic Coatings Based on Fluoragnesium Apa-tite: Application Technology and Properties
-
(Not-set)
-
The technology of synthesis of fluoromagnesiumapatite powder and technology of coating formation by plasma spraying on its basis are presented. The recommended mode for the formation of a coating based ...
-
7.
The microstructure and properties of low-temperature porcelain
-
(Science for ceramic production)
-
... liquid phase on the formation of the structure, operational and decorative characteristics of porcelain made using energy-saving technology has been established. Tab. 3, ill. 2, bibliography: 5 titles ...
-
8.
LASER-INDUCED TRANSFER OF COLORING AGENT TO GLASS FOR MARKING STRUCTURAL OPTICS PRODUCTS
-
(Not-set)
-
A laser marking process for glass products was studied. This process involves laser-induced transfer of ink vapor to the product surface upon irradiation from the opposite side through the glass. A pulse-periodic ...
-
9.
THE PROCESS OF FORMATION OF CRYSTALLINE PHASES IN HEAT-RESISTANT CORDIERITE-CONTAINING ELECTRICAL MATERIALS
-
(Not-set)
-
The article presents the results of studies of heat-resistant insulating ceramics, as well as a mechanism of cordierite phase formation during single firing of compositions containing polymineral clay ...
-
10.
THERMODYNAMIC ANALYSIS OF OXIDE-CARBON AND CARBON MONOXIDE CHEMICAL REACTIONS IN ORDER TO SELECT ADDITIVES FOR CARBON NANOTUBE REINFORCED CORUNDUM CERAMICS
-
(Not-set)
-
The calculation of Gibbs energy for reactions of interaction of ZrO2, Al2O3, SiO2, TiO2, CaO and MnO with carbon and carbon monoxide in temperature range 1273 – 2273 К (1000 – 2000 ?С) is made to select ...
-
11.
SYNTHESIS OF WOLLASTONITE-CONTAINING CERAMICS FROM NATURAL RAW MATERIALS OF THE REPUBLIC OF BELARUS
-
(Not-set)
-
... composition of synthesized ceramic materials in connection with the physicochemical properties and operational characteristics were established. The influence of a mineralizing additive (naturally occurring ...
-
12.
GLASS FILLERS BASED ON THE SrO–Al2O3–B2O3–SiO2 SYSTEM FOR DENTAL COMPOSITES
-
(Not-set)
-
... and no tendency to crystallization. It is shown that the developed glass filler provides a high level of biomedical, operational and functional properties of a dental composite based on it and competitiveness ...
-
13.
The Prospects for the Use of Clay Raw Materials From the "Krupeisky Sad" Deposit For Obtaining Heat-Resistant Ceramic Product
-
(Not-set)
-
The complex study of the mineralogical and chemical composition, as well as the technological properties of clay from the “Krupeisky Sad” deposit of the Republic of Belarus, was carried out. The features ...
-
14.
Influence of High-Alumina Sludge of Alkaline Etching on Technical Parameters and Phase Composition of Acid-Resistant Materials
-
(Not-set)
-
... in compositions that do not contain high-alumina raw materials or calcined sludge of alkaline etching, mainly mullite is formed, which mainly forms the operational properties of ceramic products. X-ray ...
-
15.
Lightweight Ceramics with Addition of Waste Production of Mineral Wool and Aluminosilicate Cenospheres of Various Fractions
-
(Not-set)
-
A study of the influence of the addition of aluminosilicate cenospheres (ASC) of 2 fractions on the structure and properties of ceramics with waste from the production of mineral wool (MW) was carried ...
-
16.
Plasma Technology for the Production of Glass
Pellets Based on Waste from the Enrichment of Ferruginous Quartzite KMA
-
(Not-set)
-
... K, there is a complete melting and spherization of the particles with the formation of glass microspheres with a size of 80 to 1250 microns. The following operational parameters of glass microspheres based ...
-
17.
Lightweight Glass-Crystalline Proppants
-
(Not-set)
-
The possibility of obtaining lightweight porous proppants based on metallurgical slags has been investigated. The structure, phase composition and some operational and physical properties of the obtained ...
-
18.
Bulk Processing of Industrial Waste into Foam Glass Materials
-
(Not-set)
-
An overview of research in the field of utilization of large-scale industrial waste in the production of granular and block foam materials is presented. The possibilities and prospects of obtaining materials ...
-
19.
Use of Alternative Energy Sources and Glass Domestic Waste in Ceramic Facing Glazing Technology
-
(Not-set)
-
A technology for glazing ceramic tiles has been developed using alternative energy sources and glass household waste. The effect of a plasma jet on the change in the chemical composition of materials for ...
-
20.
Glass Silica Based on Ferrous Quartzite Kursk Magnetic Anomaly Enrichment Waste and Glass Household Waste
-
(Not-set)
-
A technology has been developed for the production of glass-silica based on the wastes of enrichment of ferruginous quartzites of the Kursk Magnetic Anomaly (KMA) of the Lebedinsky GOK and fractionated ...
