-
1.
GEL CASTING METHOD FOR THE PRODUCTION OF CERAMIC MATERIALS
-
(Not-set)
-
... and porous ceramic materials. The advantages of this method, such as ease of processing, the use of technological equipment of traditional methods, increased productivity, the possibility of obtaining ...
-
2.
Insulating Enamel Leaden-Borate Glass Basis
-
(Not-set)
-
... the power and productivity of the ozone generator, improve the conditions for electrodes cooling, and makes it possible to create high-frequency ozone generators operating at high-frequency currents. Also, ...
-
3.
Glass Composite Hardening with Multilayer Carbon Nanotubes Aligned with a Constant
Electric Field
-
(Not-set)
-
The effect of the electric field intensity and the percentage of multi-layer carbon nanotubes (MCNTs) on the strength of a composite consisting of unidirectional glass fibers has been studied. The results ...
-
4.
Glass Cutting Technoligy Using the Two Different Lasers
-
(Not-set)
-
A new technology for laser cutting glass along a curved contour is described, which combines the combined use of two different cutting methods in one technological cycle: the method of laser controlled ...
-
5.
Laser Drilling Microholes in Glass
-
(Not-set)
-
The results of successful application of the method of laser drilling of micro-holes with a diameter of 30 - 200 µm in glasses with a thickness of 0.1 to 0.8 mm are presented. Achievement of high quality ...
-
6.
Laser Technology for Removal of Conducting Coatings from Electrowarmed Glassing Products (Review)
-
(Science for glass production)
-
... has been proposed. This method makes it possible to increase the productivity of work tenfold without deteriorating the strength characteristics of transport structural glass products while reducing the ...
-
7.
Mechanical Properties of Glass-Fiber Plastics Modified with Carbon Nanotubes
-
(Science for glass production)
-
The results of a study of the physical and mechanical characteristics of fiberglass modified with carbon nanotubes are presented. An epoxy binder was chosen as a polymer matrix; glass fibers were used ...
-
8.
Glassware forming (a review)
-
(Science for glass production)
-
Various methods of forming glassware, their physicochemical and technological features are considered. At the same time, the structural and deformation characteristics of glass-forming melts, the performance ...
-
9.
Formation of silicium crystalline structure in active media during polishing
-
(Materials processing)
-
Under the action of surfactants included in the polishing compositions, due to the manifestation of the Rebinder effect, the initial crystal structure of the thinnest (tenths and hundredths of a micrometer) ...
-
10.
Influence of active components in polishing compositions on corudum surface layer dispergation during fine abrasive treatment
-
(Materials processing)
-
... of the surface-active components of the polishing composition. The results obtained must be taken into account when developing polishing compositions that provide an increase in the productivity of fine ...
-
11.
Molding plasters in sanitaryware production. Adjusted porosity in terms of optimised strength
-
(Industrial experience)
-
The developed molding gypsum of improved quality is used in the casting of ceramic products using traditional and multiple casting technologies (Spagless). Such gypsums provide an increase in casting performance, ...
-
12.
Immediate challenges in glass-making
-
(Efficiency and quality)
-
Problems limiting the technical and economic efficiency of glass making are considered. The necessity and possibility of design and construction of high-performance and energy-efficient glass-melting furnaces ...
-
13.
The use of surfactants in silicate materials production
-
(At the enterprises and institutes)
-
The introduction of plasticizers into ceramic masses allows to facilitate the extrusion process, increase the speed of the bar and increase productivity. It is possible with a lower molding moisture to ...
-
14.
Diamond wheels on an organic binder for grinding household and art glass
-
(Materials processing)
-
... of the bond M2-01 with a diamond powder grain size of 53/45 microns and a concentration of 50% made it possible to increase the productivity of preliminary diamond grinding of high-quality and art glass ...
-
15.
Determination of the optimal capacity of belt vacuum-press upon making of ceramic
-
(At the enterprises and institutes)
-
Calculation formulas are given to determine the optimal power, taking into account the factors affecting the power and productivity of presses for molding clay materials. Friction resistance coefficients ...
-
16.
Increase in dimensional stability of the diamond ring for machine grinding of the household and fancy glass
-
(Materials processing)
-
An increase in productivity and a decrease in the cost of grinding products from profiled and art glass is achieved as a result of using special multi-spindle copying machines or CNC machines. An increase ...
-
17.
Influence of geometric parameters on the performance of vacuum-belt press for molding ceramic
-
(Equipment)
-
The productivity of a belt vacuum press during the formation of ceramic masses has been studied depending on the specific pressing pressure, productivity losses during press wear and geometric factors ...
-
18.
Determination of the optimal performance of the vacuum-belt press for forming ceramic mass
-
(Equipment)
-
The analysis of determining the optimal performance of a belt vacuum press in the formation of products from ceramic masses is carried out. Various options for determining productivity are presented, taking ...
-
19.
Calculation and design of a melting tank for melting of the container glass
-
(Science for glass production)
-
... and mass transfer can significantly improve the quality of design solutions, the implementation of which creates objective preconditions for achieving high energy efficiency and productivity of glass furnaces. ...
-
20.
Refining of the glass furnace performance specification
-
(Science for glass production)
-
The process of improving the main technical characteristics of a glass-melting furnace is considered: productivity, specific removal of molten glass and specific heat consumption for glass-making. Their ...
