-
1.
DIELECTRIC PROPERTIES OF CERAMICS BASED ON BN–ZrB2 AND BN–ZrO2 PRODUCED BY SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS
-
(Not-set)
-
Dielectric properties of ceramic materials based on BN–ZrB2 and BN–ZrO2 systems synthesized in the mode of self-propagating high-temperature synthesis (SHS) from a mixture of boron B powders, boron nitride ...
-
2.
Metal/Ceramic Composite Based on Ni?Al?SiO2 System Produced by Self-Propagating High-Temperature Synthesis
-
(Coatings)
-
By the method of self-propagating high-temperature synthesis (SHS) with preliminary mechanical activation treatment (MA), a cermet material was obtained based on the Ni? Al? SiO 2 system with different ...
-
3.
Gas-dynamic model of open and closed porosity formation in self-propagating high-temperature synthesis
-
(Science for ceramic production)
-
A gas-dynamic model of the formation of open and closed porosity of materials under the conditions of combustion of an SHS system, when there is a liquid phase (which can boil under certain conditions), ...
-
4.
Self-propagating high-temperature synthesis of silicon nitride based ceramic composite using ferrosilicon and ilmenite
-
(Science for ceramic production)
-
... of the composition Si 3 N 4 - TiN - Si 2 N 2 O - Fe was obtained by the method of self-propagating high-temperature synthesis with the use of ferrosilicon and ilmenite pulverized waste as raw materials. ...
-
5.
Processes of phase-and structure-formation upon self-propagating high-temperature synthesis in the system Al - MgCO3 - SiO2 - C
-
(Science for ceramic production)
-
The processes of phase formation and structure formation in the Al - MgCO 3 - SiO 2 - C system during self-propagating high-temperature synthesis are considered. The dependences of the structure and ...
-
6.
Ceramics based on the powders of silicon nitride obtained by self-propagating high-temperature synthesis
-
(Science for ceramic production)
-
Ceramics based on silicon nitride powder obtained by self-propagating high-temperature synthesis have been investigated. Yttrium aluminum garnet and mullite were used as sintering additives. The resulting ...
-
7.
Self-propagating high-temperature synthesis
of cerium chromate substituted with alkali-earth metals
-
(At the enterprises and institutes)
-
In the mode of self-propagating high-temperature synthesis using solid in-reaction oxidants, unsubstituted and substituted by alkaline earth metals, cerium chromites are synthesized. The characteristic ...
-
8.
Formation of nickel, cobalt and aluminium-based porous materials in self-propagating high temperature vacuum synthesis
-
(Science for ceramic production)
-
As a result of calculating the influence of the volumetric effect of a chemical reaction on the porosity of the formation of the final product for the Al-Ni-Co system in vacuum, it is shown that the synthesized ...
-
9.
Self-propagating high temperature synthesis of spinel-type pigments
-
(Science for ceramic production)
-
The processes of obtaining spinel-type pigments from a mixture of Al 2 O 3 and Co 2 O 3 with aluminum powder ASD- 4 and additions of MgO and ZnO by the method of self-propagating high-temperature ...
-
10.
Synthesis of YAG:Er Powders for Optically Transparent Ceramics Via Glycine-Nitrate Technique
-
(Science for ceramic production)
-
The results of the synthesis of erbium-doped yttrium-aluminum garnet nanopowders by the glycine-nitrate method to obtain optically transparent ceramics are discussed. The effect of synthesis conditions ...
-
11.
Synthesis, Structure and Properties of One- and Multi-Component Additives for Ceramic Materials Based on Aluminum Oxide (review)
-
(Science for ceramic production)
-
One- and multicomponent sintering additives for ceramics based on aluminum oxide are presented. It has been established from the literature that the use of one-component additives is less effective than ...
-
12.
Influence of synthesis atmosphere on formation of pyrochlore matrices for HLWaste immobilisation
-
(Environmental protection)
-
Research has been carried out on the synthesis of ceramic matrices based on zirconium-enriched pyrochlore for the immobilization of high-level waste (HLW) by the method of self-propagating high-temperature ...
-
13.
Nanosized ZrN powder microwave synthesis compared to autoclaving
-
(Science for ceramic production)
-
The synthesis of nanodispersed powders of zirconium nitride ZrN using exothermic reactions initiated by microwave radiation has been studied. The obtained ZrN powders were studied using X-ray phase analysis ...
-
14.
Anion-exchange synthesis of spinel-type cobalt pigments
-
(Coatings)
-
The synthesis of ultramarine blue pigment is proposed by coprecipitation of cobalt and aluminum from nitrate solutions with anionite AB-17-8 in the OH-form, followed by calcining the precursor at 750 ° ...
-
15.
Synthesis, structure and properties of titanium carbosilicides from the system FeSi - Ti - C
-
(Science for ceramic production)
-
The possibility of obtaining titanium carbosilicides by the method of self-propagating high-temperature synthesis from materials based on the FeSi - Ti - C system is shown. The microstructure and phase ...
-
16.
Chemically and thermally paired synthesis of silicon nitride based composites using ferrosilicon
-
(Science for ceramic production)
-
... nitride during the interaction of ferrosilicon in nitrogen in the combustion mode is considered as an inducing process. It is shown that due to the energy of self-propagating high-temperature synthesis ...
-
17.
Synthesis of spinel type Ni-containing pigments in conditions of burning
-
(Science for ceramic production)
-
The results of experimental studies of the process of self-propagating high-temperature synthesis (SHS method) of blue-green nickel-containing spinels are presented. The composition of the compounds was ...
-
18.
The effect of Si content in the starting alloy on silicon nitride synthesis upon burning of ferrosilicon in nitrogen atmosphere
-
(Science for ceramic production)
-
The process of nitriding of commercial FS 65 alloy in the mode of self-propagating high-temperature synthesis has been studied. The influence of the phase composition of the initial alloy on the combustion ...
-
19.
The effect of compositions and synthesis conditions on the structure of Co-containing spinellide-type pigments
-
(Science for ceramic production)
-
The results of obtaining blue-blue cobalt-containing spinels by the method of self-propagating high-temperature synthesis are presented. The influence of the synthesis conditions and composition on the ...
-
20.
Synthesis of refractory composites on the basis of chromates of alkali-earth metals
-
(Science for ceramic production)
-
... which were also products of self-propagating high-temperature synthesis. The resulting refractories, in terms of their structural and physicochemical characteristics, are not inferior to products synthesized ...
