Drilling of Porous Aluminosilicate Ceramics

Ya.S. FIRONOV ¹ , Cand. physical-mat. Sci. I. V. MELNIKOV ¹ , Cand. physical-mat. E. R. NADEZHDIN ² , Dr. of Phys.-Math. Sciences V. N. TOKAREV ³ ; ¹ School of Radio Engineering and Computer Technologies, MIPT (Russia, Dolgoprudny)
² HTC Marine Geophysics, MIPT (Russia, Dolgoprudny)
³ General Physics Institute A.M. Prokhorova of the Russian Academy of Sciences (GPI RAS) (Russia, Moscow)

Whiteley P., Russman HD, Bishop JD Porosity of building materials. A collection of published results // J. Oil Col. Chem. Assoc. 1977. V. 60. P. 142? 150. Najar PAM, Nimje MT, Bagde SU et al. Development of light wight foamed bricks from red mud. Bauxite, Alumina and Aluminum Industry of Asia Conference, 2012. Toru Shimizua, Kazuhiro Matsuura, Harumi Furue, Kunio Matsuzak. Thermal conductivity of high porosity alumina refractory bricks made by a slurry gelation and foaming method // J. Eur. Ceram. Soc. 2013. V. 33. P. 3429? 3435. URL: http://dx.doi.org/10.1016/j.jeurceramsoc . 2013.07.001 Bernal EM, Vlasova M., Aguilar PAM et al. Synthesis and properties of porous ceramics obtained with the use of spherical expanded polystyrene particles of packaging material // Sci. Sint. 2020 (in press). Yulong Yang, Fengli Liu, Qibing Chang et al. Preparation of fly ash-based porous ceramic with alumina as the pore-forming agent // Ceramics. 2019. V. 2. P. 286? 295.doi: 10.3390 / ceramics2020023. Sarkar S., Bandyopadhyay S., Larbot A., Cerneaux S. New clay? Alumina porous capillary supports for filtration application // J. Membr. Sci. 2018. V. 392. P. 130? 136.doi: 10.1016 / j.memsci.2011.12.010. Twigg MV, Richardson JT Fundamentals and applications of structured ceramic foam catalysts // Ind. Eng. Chem. Res. 2007. V. 46. P. 4166? 4177. Hamdan Yahya, Mohd Roslee Othman, Zainal Arifin Ahmad. Effect of mullite formation on properties of aluminosilicate ceramic balls // Procedia Chemistry. 2016. V. 19. P. 922? 928. doi: 10.1016 / j.proche.2016.03.136 Chunbo Zhou, Xiaogang Mu, Youzhi Zhang, Xuanjun Wang. Review on the research methods of the barrier and explosion-proof properties of porous materials // International Symposium on Mechanics, Structures and Materials Science (MSMS 2018), 2018 / AIP Conf. Proc. V. 1995. No. 1.020003-1? 020003-9; https://doi.org/10.1063/1.5048734Published by AIP Publishing. 978-0-7354-1711-3 / $ 30.00 Guzman I. Ya. Some principles of formation of porous ceramic structures. Properties and application // Glass and ceramics. 2003.? 9, p. 28? 31. ? Guzman IA Certain principles of formation of porous ceramic structures: properties and applications (A review) // Glass Ceram. 2003. V. 60, No. nine ? 10.P. 280? 283.? Morozova LV, Lapshin AE, Drozdova A. Preparation and investigation of porous aluminosilicate ceramic materials // Glass Phys. Chem. 2008. V. 34. P. 443. URL: https: // doi.org/10.1134/S1087659608040111 Luyten J., Mullens S., Cooymans J. et al. Different methods to synthesize ceramic foams // J. Eur. Ceram. Soc. 2009. V. 29. P. 829? 832. Burlak G., M. Vlasova, PAM Aguilar et al. Optical percolation in ceramics assisted by porous clusters // Opt. Comm. 2009. V. 282. P. 2850? 2856. Vlasova M., Kakazey M., Mel'nikov I. et al. Formation of CrxCyOz coatings under laser ablation of Cr23C6 ceramics // Surface & Coatings Technology. 2018. V. 349. P. 93? 102. Vlasova M., Kakazey M., Marquez AP et al. Laser Corrosion of TiN? TiB2 Ceramics // Res. Dev. Material Sci. RDMS. 2019. V. 10, No. 2.P. 000731. doi: 10.31031 / RDMS.2019.10.000731. Vlasova M., Kakazey M., Aguilar PAM et al. TiN? TiB2 ceramics degradation in the region of a steady-state laser heating // Surface & Coatings Technology. 2019. V. 378. P. 124738. Vlasova MV, Kakazey MG, Melnikov IV et al. Fiber-Laser Ablation of High-Temperature TiN? TiB2 Ceramics for Protective Coating // Laser Congress. 2019. (ASSL, LAC, LS&C), OSA Technical Digest (Optical Society of America, 2019), paper JM5A.37. URL: https://doi.org/10.1364/ASSL. 2019.JM5A.37 Volkov AN, Zhigilei LV Melt dynamics and melt-through time in continuous wave laser heating of metal films: Contributions of the recoil vapor pressure and Marangoni effects // Int. J. Heat and Mass Transfer. 2017. V. 112. P. 300? 317. URL: https://doi.org/10.1016/j.ijheatmass-transfer.2017.04.100. Poprawe R., Schulz W., Schmitt R. Hydrodynamics of material removal by melt expulsion: Perspectives of laser cutting and drilling // Phys. Procedia. Pt A. 2010. V. 5. P. 1? 18. Dutta Majumdar J., Manna I. Laser processing of materials // Sadhana. 2003. V. 28, No. 3? 4. P. 495? 562. Steen WM Laser Material Processing. Berlin / Heidelberg: Springer-Verlag, 2003. B. Uerler D. Laser Processing and Chemistry. 3rd ed. Berlin / Heidelberg: Springer-Verlag, 2000. Allmen MV, Blatter A. Laser-beam Interactions with Materials: Physical Principles and Applications. Berlin / Heidelberg: Springer, 2002.208 p. Guillon O. Effects of Applied Stress and Heating Rate in Field Assisted Sintering. // Sintering. Engineering Materials. V. 35 / eds. R. Castro, van Benthem K. Berlin / Heidelberg: Springer, 2012. DOI: 10.1007 / 978-3-642-31009-6_9. Kovalchenko MS Rheology and Kinetics of Pressure Sintering // Materials Science Forum 2016. V. 835. P. 76? 105. URL: https://doi.org/10.4028/www.scientific.net/MSF.835.76. Rice RW Hot Forming of Ceramics // Ultrafine-Grain Ceramics: Sagamore Army Materials Research Conference Proceedings. V. 15 / eds JJ Burke, NL Reed, V. Weiss. Boston: Springer, 1970. Hongjian Wang, Huatay Lin, Chengyong Wang. Laser drilling of structural ceramics: A review // J. Eur. Ceram. Soc. 2017. V. 37. P. 1157? 1173. Shengyong Pang, Xin Chen, Jianxin Zhou et al. 3D transient multiphase model for keyhole, vapor plume, and weldpool dynamics in laser welding including the ambient pressure effect // Optics and Lasers in Engineering. 2015. V. 74. P. 47? 58. URL: https://doi.org/10.1016/j.optlaseng.2015.05.003 Bechtold P., Eiselen S., Schmidt M. Influence of electrostatic fields and laser-induced discharges on ultrashort laser pulse drilling of copper // Physics Procedia. 2010. V. 5. P. 525? 531. URL: https://doi.org/10.1016/j.phpro . 2010.08.176 Otto A., Schmidt M. Towards a universal numerical simulation model for laser material processing // Physics Procedia. 2010. V. 5. P. 35? 46. ??URL: https://doi.org/10.1016/j.phpro. 2010.08.120. Coquard R., Rochais D., Baillis D. Conductive and Radiative Heat Transfer in Ceramic and Metal Foams at Fire Temperatures: Contribution to the Special Issue? Materials in Fire ?? / Guest Editor K. Ghazi Wakili // Fire Technology. 2012. V. 48. P. 699? 732. DOI: 10.1007 / s10694-010-0167-8 Sol? Rzano E., Reglero JA, Rodr? Guez-P? Rez MA et al. An experimental study on the thermal conductivity of aluminum foams by using the transient plane source method // Int. J. Heat Mass. Transf. 2008. V. 51. P. 6259? 6267. Coquard R., Rochais D., Baillis D. Experimental investigations of the coupled conductive and radiative heat transfer in metallic / ceramic foams // Int. J. Heat Mass. Transf. 2009. V. 52, Is. 21? 22. P. 4907? 4918. Takegoshi E., Hirasawa Y., Matsuo J., Okui K. A Study on Effective Thermal Conductivity of Porous Metals // Trans. Jap. Soc. Mech. Eng. 1992. V. 58. P. 879. Fetoui M., Albouchi F., Rigollet F., Nasrallah SB Highly porous metal foams: effective thermal conductivity measurement using a photothermal technique // J. Porous Media 2009. V. 12, No ... 10.P. 939? 954. Barea R., Osendi MI, Ferreira JMF, Miranzo P. Thermal conductivity of highly porous Mullite material // Acta Mater. 2005. V. 53, No. 11.P. 3313? 3318.