The possibilities of obtaining metal-ceramic materials of the composition Al2O3–Al by liquid-phase oxidation of aluminum by purging the melt with oxygen are considered. The manufacturability of this process makes it possible to avoid the use of powder materials, which leads to a large variability in the formation of the phase components of the materials obtained and a reduction in the cost of their production in comparison with powder metallurgy methods. It is established that by regulating the oxidation process by changing the speed and supply of the gas mixture, it is possible to obtain metal-ceramic composites with different geometric configurations of the ceramic phase and its quantity. An algorithm is proposed for calculating the kinetics of aluminum oxidation during the production of the ceramic phase of a metal-ceramic composite, taking into account the peculiarities of the thermophysical process.
Vladimir V. Mylnikov – PhD (Eng.), Candidate of Technical Sciences, Associate Professor of the Department of Construction Technologies, Faculty of Civil Engineering, Nizhny Novgorod State University of Architecture and Civil Engineering (TSP ISF NNGASU), Nizhny Novgorod, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..
Alexander I. Pronin – PhD (Eng.), Candidate of Technical Sciences, Associate professor of the Department of “Mechanical Engineering”, Komsomolsk-na-Amur State University (ME KnASU), Komsomolsk-on-Amur, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..
Marina V. Mylnikova – junior research assistant of the Department of Scientific Research, Innovation and Design Works (UNIIPR) NNGASU, Nizhny Novgorod, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..
Elena A. Romanova – junior research assistant of the Department of Scientific Research, Innovation and Design Works (UNIIPR) NNGASU, Nizhny Novgorod, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..
Dmitriy I. Shetulov – Doctor of Technical Sciences, Professor, presenter. sci. employee of the Department of Scientific Research, Innovation and Design Works (UNIIPR) NNGASU, Nizhny Novgorod, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..
Ivan A. Gulin – senior lecturer of the Department of Construction Technologies, Faculty of Civil Engineering, Nizhny Novgorod State University of Architecture and Civil Engineering (TSP ISF NNGASU), Nizhny Novgorod, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..
1. Каблов Е. Н. Стратегические направления развития материалов и технологий их переработки на период до 2030 года // Авиационные материалы и технологии. М.: ВИАМ. 2012. С. 7 – 17.
2. Reddy B. S. B., Das K., Das S. A review on the synthesis of in situ aluminum based composites by thermal, mechanical and mechanical-thermal activation of chemical reactions // Journal of Materials Science. 2007. V. 42, Nо. 22. P. 9366 – 9378.
3. Bodunrin M. O., Alaneme K. K., Chown L. H. Aluminium matrix hybrid composites: A review of rein-forcement philosophies; mechanical, corrosion and tribological characteristics // J. Mater. Res. Technol. 2015. No. 4. P. 434 – 445.
4. Иванов О. Н., Япрынцев М. Н., Васильев А. Е. и др. Особенности микроструктуры металлокерамического композита на основе матрицы из термоэлектрического теллурида висмута и ферромагнитного наполнителя // Стекло и керамика. 2021. № 11. С. 23 – 29.[Ivanov O. N., Yapryntsev M. N., Vasil’ev A. E., et al. Microstructure Features of Metal-Matrix Composites Based on Thermoelectric Bismuth Telluride Matrix and Ferromagnetic Filler // Glass Ceram. 2021. V. 78, No. 11–12. P. 442 – 447.]
5. Пашкеев И. Ю., Михайлов Г. Г., Сенин А. В., Лопатко В. М. Изготовление металлокерамических композитов по способу «конденсированное горение – пропитка» // Вестник Южно-Уральского государственного университета. Сер.: Металлургия. 2007. № 21(93). С. 45 – 49.
6. Мофа Н. Н., Садыков Б. С., Баккара А. Е. и др. Получение металлокерамических СВС-композитов на основе механохимически обработанных систем // Горение и плазмохимия. 2018. Т. 16, № 3–4. С. 159 – 171.
7. Mavhungu S., Akinlabi E., Onitiri M., Varachia F. Aluminum Matrix Composites for Industrial Use: Advances and Trends // Procedia Manuf. 2017. No. 7. Р. 178 – 182.
8. Шелудяк Ю. Е., Кашпоров Л. Я., Малинин Л. А., Цалков В. Н. Теплофизические свойства компонентов горючих систем. М.: Информ ТЭИ, 1992. 184 с.
9. Мержанов А. Г., Мукасьян А. С. Твердопламенное горение. М.: Торус Пресс, 2007. 336 с.
10. Рогачев А. С., Мукасьян А. С. Горение для синтеза материалов: введение в структурную макрокинетику. М.: Физматлит, 2012. 400 с.
The article can be purchased
electronic!
PDF format
500
DOI: 10.14489/glc.2022.11.pp.043-051
Article type:
Research Article
Make a request
