-
21.
Study of the Porosity Structure of a Ceramic Material of the Fortress Wall of Girona (Spain)
-
(Not-set)
-
The object of the research is ceramic material taken from the fortress wall of the city of Girona. The chemical composition of the test material showed an increased carbon content (13.1 & # 37;), which ...
-
22.
New Technology for Forming Mineral Products
-
(Not-set)
-
A new technology for the formation of a multilayer mineral wool carpet by means of a pendulum zigzag layout of a primary mineral wool carpet is described, which consists in the formation of a loop with ...
-
23.
Low-Temperature Co-Firable Ceramic Li2Zn3Ti4O12 with an Eutectic Additive in the Li2O-B2O3-SiO2 System
-
(Not-set)
-
In the Li 2 O-ZnO-TiO 2 system, a material has been developed for the technology of low-temperature co-firing of ceramics with a view to its use in the production of electronic components. The sintering ...
-
24.
The Influence of Modification of Polyurea with Glass Microspheres on its Operational Properties
-
(Not-set)
-
Modification of polyurea with glass microspheres has been carried out. Polyurea compositions of coatings based on them have been obtained. Their properties are assessed. The results of studying the compositions ...
-
25.
Electrotechnical Porcelain Using Natural Finely Dispersed Silica-Containing Raw Materials and Wollastonites
-
(Science for ceramic production)
-
The influence of wollastonites and marshallites on phase transformations, processes of formation of the mineral composition and structure of electrical porcelain is determined. The positive dynamics of ...
-
26.
Vibrocompacting of Lead-Free Piezoceramic Powder Material Based on Solid Solutions of Potassium and Sodium Niobates
-
(Science for ceramic production)
-
The possibility of obtaining samples of lead-free piezoelectric ceramics using vibration molding at a pressing pressure of less than 0.3 MPa is being considered. The experiments were carried out on the ...
-
27.
Temperature Coefficient of Linear Expansion of Ceramic Material Based on Color Metallurgy Wastes, Glaze and its Mechanism of Formation During Firing
-
(Utilization of waste)
-
Studies have shown that in order to obtain a glazed ceramic material with increased heat resistance, it is necessary that the value of the TEC for the ceramic material be no more than 1.50 - 1.55 & # 37; ...
-
28.
Calculation of Heat Loss from the Outer Surface of the Furnace Coat
-
(Equipment)
-
The dependences for calculating the density of the heat flux into the environment from the outer surfaces of the enclosure of industrial furnaces: side walls, vault and hearth, obtained from the analysis ...
-
29.
The Quality Improvement of Construction Products Based on Technogenic Crushed Glass
-
(Utilization of waste)
-
The size of the fraction of ground glass as the main component has a decisive influence on the quality of building products made of foam glass concrete. This indicates the need to ensure a given size of ...
-
30.
Mechanical Properties of Glass-Fiber Plastics Modified with Carbon Nanotubes
-
(Science for glass production)
-
The results of a study of the physical and mechanical characteristics of fiberglass modified with carbon nanotubes are presented. An epoxy binder was chosen as a polymer matrix; glass fibers were used ...
-
31.
M?ssbauer spectroscopic studies of ferrous oxides, phase com-position and porous structure in ceramic bricks made of coal slate clay and pitch coal slag
-
(Science for ceramic production)
-
A ceramic brick was obtained on the basis of intershale clay and slag from burning brown coal without using traditional natural raw materials. Studies have shown that the ferrous compounds on the surface ...
-
32.
Optimal speed of cooling for porous filler made from liquid-glass batches
-
(Utilization of waste)
-
The composition and method of obtaining highly porous materials at low-temperature swelling of liquid glass and ash-and-slag material from the combustion of oil shale, used as a filler and burnout additive, ...
-
33.
Rheological behaviour of ceramic slurries and physic-mechanic properties of acidresistant ceramics made of nanosized petroleum chemistry and non-ferrous metals production industrial waste, and pyrophy
-
(Utilization of waste)
-
A significant effect of the amount of aluminum-containing nanotechnogenic raw materials based on non-ferrous metallurgy and pyrophyllite on the structural and rheological properties of ceramic masses for ...
-
34.
Study of composite glass-plastic supports stiffening behaviour
-
(At the enterprises and institutes)
-
A study of the stiffness characteristics of fiberglass supports with a taper angle & # 8776; 89 & # 176 ;. A method for determining the modulus of elasticity in tension and compression in the longitudinal ...
-
35.
Composite heat-insulation material synthesis from liquid glass and salt industrial waste of aluminium production
-
(Utilization of waste)
-
On the basis of liquid glass modified with sodium chloride and salt waste of aluminum production, a heat-insulating material was obtained without the use of natural traditional materials. The presence ...
-
36.
Powders synthesized from calcium acetate and mixed-anion solution of phosphate- and carbonate-ions for bioceramics production
-
(Biomaterials)
-
From an aqueous solution of calcium acetate and a mixed-anionic (HPO 4 2- / CO 3 2- ) aqueous solution containing ammonium hydrogen phosphate and ammonium carbonate, an X-ray amorphous powder was ...
-
37.
Thermal performance of diatomite-based materials in a broad temperature range
-
(Coatings)
-
The dependences of the ultimate strength in compression of diatomite on temperature in the temperature range of 50 - 700 ° C are investigated. The ultimate strength in compression at a temperature of 450 ...
-
38.
Development of enamel coatings for promising combined-cycle plants
-
(Coatings)
-
High-temperature enamel coatings with a sufficiently high firing temperature have been obtained, which provide the necessary protective properties and heat resistance. The results of scientific and experimental ...
-
39.
Glass-enamel corrosion-resistant coatings for steel pipelines
-
(Coatings)
-
Currently, the problem of obtaining a defect-free corrosion-resistant glass enamel coating for steel pipelines is an urgent problem. The composition of the corrosion-resistant glass enamel coating for ...
-
40.
Calcium phosphate powder synthesis from calcium formiate and ammonium hydro-phosphate for bio-compatible resorbable bi-phase ceramics production
-
(Biomaterials)
-
Calcium phosphate powder was synthesized from calcium formate Ca (CHO 2 ) 2 and ammonium hydrogen phosphate (NH 4 ) 2 HPO 4 at the Ca / P ratio in the initial aqueous solutions equal to 1. The ...