-
21.
Hydraulic radius evaluation in porous structure of ceramic materials
-
(Science for ceramic production)
-
The analysis of the existing dependences describing the capillary absorption of liquid in porous materials is carried out on the basis of an ideal model and data of mercury porosimetry. It is shown that ...
-
22.
Thermal expansivity (at 130 ? 800 K) of borosilicate glasses applica-ble for coupling with silicon in microelectronics
-
(At the enterprises and institutes)
-
The results of processing measurements of the TLEC and relative elongation of borosilicate glasses of two grades are presented. LK5 and Borofloat 33. The thermomechanical analyzer TMA7100 was used to measure ...
-
23.
Fractal approach to ceramic surface analysis
-
(Science for ceramic production)
-
The efficiency and feasibility of using fractal methods to study the surface structure of ceramic materials have been investigated. It was found that the fractal formalism can be used as a means of studying ...
-
24.
Non-transparent colours based on ED-20 resin water emulsion for glassware decoration
-
(Coatings)
-
The possibility of using aqueous epoxy emulsions as a binder for obtaining paints intended for decorating glass products is shown. The physicochemical properties of epoxy coatings have been studied.
-
25.
Nature of Liquescence and Fluidity of Kaolin of the Zhuravliny Log Deposit (a Review)
-
(Raw materials)
-
A review of studies on the nature of the most effective methods for regulating the liquefaction and fluidity of kaolin from the Zhuravliny Log deposit is presented. The data on the material, mineral and ...
-
26.
Assessment of the structure of monodisperse ceramic composites
-
(Science for ceramic production)
-
Methods for determining the dependence of the average distance between particles in monodisperse composites are analyzed. A refined method is proposed for determining the average distance between particles ...
-
27.
Improvement of the methods of geodesic measurements upon construction and service of float-lines with continuous production cycle
-
(Science for glass production)
-
The necessity of using geodetic measurements to identify deformation processes on the rotating surfaces of roller conveyors of industrial lines for the production of flat glass is substantiated. A description ...
-
28.
Testing of laminate glass for impact-resistance
-
(Science for glass production)
-
Comparative tests of laminated glass of various completing for impact resistance were carried out. Tests have confirmed the possibility of using glass subjected to a special heat treatment for the production ...
-
29.
Optical interference system of technological control of the float-glass stripe thickness at the hot stages of manufacture
-
(Science for glass production)
-
A new optical multichannel system for technological control of the thickness of float glass at the beginning of the annealing furnace, based on the interference principle of thickness measurement, is described. ...
-
30.
Testing of complex glass for bullet-proof capacity
-
(Science for glass production)
-
The results of comparative tests of multilayer glasses during firing from a Makarov pistol are presented. It is shown that the use of sheet glass, subjected to a special heat treatment, for the assembly ...
-
31.
Prospects of the new method of the sheet glass thermal treatment
-
(Science for glass production)
-
The essence is considered and the results of a three-stage impulse tempering of sheet glass with an adhesive polymer film are presented. Il. 3, bibliography: 5 titles.
-
32.
The jubilee of academician Sarkisov Pavel Dzhibraelovich
-
(Information)
-
-
33.
The limiting levels of hardening stresses in the sheet glass
-
(Science for glass production)
-
The calculation of the limiting level of hardening of sheet glass, based on three classical strength criteria and equal to about 500 MPa, is presented. Il. 3, bibliography: 6 titles.
-
34.
Design factors of hardening lattices upon critical air flow
-
(Science for glass production)
-
A generalization of the design and technological parameters of cooling grids at a critical air flow from nozzles for hardening glass of various thicknesses is proposed. Il. 3, bibliography: 3 titles.
-
35.
The International conference STEKLOPROGRESS - XXI
-
(Information)
-
-
36.
Glass hardening using critical air flow
-
(Science for glass production)
-
The method of calculating the system compressor - receiver - quenching grids with one-time pressure relief is presented. It has been revealed that such systems are highly promising for use in the theory ...
-
37.
New developments of the Sklostroi Company
-
(Information)
-
-
38.
Strength of laminated safe glass of structural duty
-
(Science for glass production)
-
An analytical approach to determining the impact strength of laminated glass is considered. A method is proposed to reduce material consumption, energy consumption and the cost of a package through the ...
-
39.
Model of triplex fracture upon shock
-
(Science for glass production)
-
The proposed method for calculating the impact strength of triplex proved the possibility of further improving its design based on glass subjected to complex heat treatment. Il. 2, bibliography: 3 tit
-
40.
Energy method for determination of the shock strength of plate glass
-
(Science for glass production)
-
A new method for predicting the impact strength of sheet glass based on the energy approach is proposed. The method was tested on annealed and tempered glasses. Il. 3, bibliography: 4 titles.
