-
1.
Author Guidelines
-
... articles reflecting the results of studies held by the author (s), scientific reviews, the deliverables of scientific events (symposiums, conferences, seminars, etc) are accepted to publication.
3.2. The ...
-
2.
LTCC-RESISTORS
-
(Not-set)
-
In this paper the experience of using regular and specially developed resistive pastes for resistors compatible with LTCC substrates is reviewed. Characteristics of surface, buried, and 3D resistors manufactured ...
-
3.
TO THE 85th ANNIVERSARY OF THE BIRTH OF V. F. SOLINOV
-
(Not-set)
-
The activity of the remarkable scientist V.F. Solinov is considered.
-
4.
PIEZOCERAMICS TECHNOLOGIES: APPROACHES FOR ENVIRONMENTAL IMPACT MITIGATION
-
(Not-set)
-
The functional ceramic materials are broadly used in the electronic industry. Many of them are comprised of ferroelectric materials because of their outstanding piezoelectric and dielectric properties. ...
-
5.
Fly Ash as a Technogenic Raw Material for the Production of Re-fractory and Insulating Ceramic Materials (Review)
-
(Not-set)
-
A review of the literature on the production of fly ash at thermal power plants and the level of its processing in Russia and abroad is presented. The properties of fly ash and its fields of application ...
-
6.
Ceramic Material Composite on the Basis of Silicon Carbide with Eutectic Additives
-
(Science for ceramic production)
-
Composite ceramics of granular silicon carbide, precipitation hardened by eutectic additives of the Al 2 O 3 -MnO-TiO 2 system, have been obtained. The effect of a dispersed eutectic powder in the ...
-
7.
Laser welding of glass
-
(Science for glass production)
-
A review of technologies for laser welding of glass is carried out. The technologies of welding with continuous CO 2 -laser radiation in the mode of surface heating and in the mode of deep penetration ...
-
8.
Mixed defoculants of various nature and their influence on cement stone structure and properties
-
(At the enterprises and institutes)
-
The effect of two deflocculants that effectively reduce the viscosity of the cement paste has been investigated. sodium tripolyphosphate (PF) and Castament FS 20 (C1) based on polycarboxylate ether and ...
-
9.
Chemical composition change dynamics in XVIII ? XIX century russian glasses
-
(At the enterprises and institutes)
-
The study of the chemical and isotopic composition of glass fragments found on the territory of the former glass factory XVIII? XIX centuries. in Kazan. Are the finds divided into three main groups? by ...
-
10.
Nanoscale morphology of synthetic leucoxene processing powdered products
-
(Science for ceramic production)
-
Titanosilicates with the structure of natisite Na 2 TiSiO 5 have been synthesized using titanium-silicon intermediate products formed during processing of leucoxene ores as precursors. Using the method ...
-
11.
Structure formation in calcium ferrite under mechano-chemical processing in FeC2O42H2O?Ca(OH)2 system
-
(At the enterprises and institutes)
-
The process of mechanochemical synthesis of calcium ferrite from iron oxalate FeC 2 O 4 * 2H 2 O and calcium hydroxide Ca (OH) 2 . The optimal conditions for obtaining calcium ferrite have been ...
-
12.
Landmarks in cooperation between D. Mendeleyev University de-partment of ceramics and refractories and Glass and Ceramics
-
(Jubilee)
-
The research results of the Russian Chemical Technical University named after V.I. DI Mendeleev in the field of obtaining modern ceramic materials with high performance properties. The technological features ...
-
13.
Bio-processing of clay materials and ceramic masses: main trends, techniques and practical experience
-
(Science for ceramic production)
-
An overview of works on biological effects on clay materials and ceramic masses is presented. The main directions and differences in the technology of biological treatment are determined depending on the ...
-
14.
Marnetic separation of raw materials for glass and ceramics production. Aspects of ferrous impurities control
-
(Raw materials)
-
Numerous data on the magnetic separation of raw materials for the production of glass and ceramics are summarized with an additional key indicator - the separation efficiency (relative decrease in the ...
-
15.
Structural and phase changes in natural quartz crystal upon fluoride treatment
-
(Science for glass production)
-
New information has been obtained on the structural changes occurring during the fluorination of natural crystalline quartz with ammonium hydrodifluoride. The morphological, structural and phase features ...
-
16.
Collection and recycling of glass in Japan
-
(Information)
-
-
17.
The use of fine-dispersed mixture of SiO2 + Sе as a colorant in tinted glass production
-
(Science for glass production)
-
A dye based on selenium obtained by converting it into micro- and nanostates by the method of mechanical dispersion with the use of the main component of the glass batch, quartz sand, as a matrix-stabilizer, ...
-
18.
The modern technologies of float glass cutting
-
(Science for glass production)
-
The main types of cutting of sheet glass are considered. Mechanical roller cutting is described in most detail as the most common at the moment. Explains the effect of roller geometry and loading on edge ...
-
19.
Gas-dynamic model of open and closed porosity formation in self-propagating high-temperature synthesis
-
(Science for ceramic production)
-
A gas-dynamic model of the formation of open and closed porosity of materials under the conditions of combustion of an SHS system, when there is a liquid phase (which can boil under certain conditions), ...
-
20.
Dressability of quartz from kaolin deposit Zhuravlinyi Log
-
(Raw materials)
-
The composition of mineral inclusions in quartz sand of wastes of the kaolin production "Plast-Rifey" operating on the basis of the "Zhuravliny Log" deposit has been studied. Various technological ...
