-
21.
Aspects of formation of titanium glaze coatings for floor tiles
-
(Coatings)
-
The efficiency of using titanium dioxide as a muffler for obtaining glass-crystalline wear-resistant semi-fritted glaze coatings of floor tiles with the required physicochemical and operational characteristics ...
-
22.
Transparent glazes for high-voltage porcelain
-
(Coatings)
-
The results of the development of compositions of raw material compositions of transparent shiny glaze coatings used for the production of ceramic high-voltage porcelain insulators are presented. The area ...
-
23.
Glazes based on pyroxene glasses produced by simultaneous addition of Group II oxides
-
(Coatings)
-
The results of studies on the effect of oxides of group II elements, jointly introduced into the glaze mixture, on the properties of pyroxene glasses are presented. It is shown that the simultaneous introduction ...
-
24.
Synthesis of spinel-type ceramic pigments and glazes
-
(Science for ceramic production)
-
The results of studies on the synthesis of ceramic pigments based on titanomagnetite using zinc, magnesium, cobalt and manganese oxides as modifying additives are presented. The phase compositions of the ...
-
25.
Low-melting non-fritted glazes for construction ceramics and artware
-
(Coatings)
-
In the system of materials datolite - perlite - cullet, low-melting jade glazes with a firing temperature of 950 - 1000 ° C were obtained. The conditions for the formation of high-quality coatings have ...
-
26.
Reduction of the probability of pinhole formation in cobalt feldspathic glazes used in porcelain production
-
(Science for ceramic production)
-
The use of pegmatite of the Chupinskoye deposit with admixtures of mica for the production of porcelain glaze may cause the formation of a "prickly" glaze defect. It was found that the introduction ...
-
27.
Special features of structure- and phase-formation in Zr-containing frits and glazes
-
(Coatings. Enamels.)
-
A comprehensive study of the features of structure and phase formation in zirconium-containing frits and glazed semi-fritted coatings with their use has been carried out. It has been established that a ...
-
28.
Special features of glaze dyeing with cobalt oxides for building ceramics
-
(Science for ceramic production)
-
The peculiarities of staining the glaze in blue with adjustable shades have been studied. The physicochemical properties of glazes with a given content of cobalt oxide and modifier oxides carrying active ...
-
29.
Production of glazy coating from dead vanadium catalysts
-
(Utilization of waste)
-
The possibility of using spent vanadium catalysts to obtain fritted colored glazes has been established. The technological parameters of the synthesis of glazed glasses in a borosilicate system using spent ...
-
30.
Physicochemical properties of low-melt glazes opacified with the float waste of copper processing plant
-
(Utilization of waste)
-
The results of the synthesis of low-melting muffled glazes for household ceramics based on the R 2 O - RO - B 2 O 3 - Al 2 O 3 - Fe 2 O 3 - ZnO - SiO 2 firmness. The interrelation of physical ...
-
31.
Improvement of the raw glaze quality using colemanite
-
(Science for ceramic production)
-
A comprehensive study of the boron-containing component, colemanite, has been carried out. Glaze coatings have been synthesized with its application. The optimal content of colemanite in the composition ...
-
32.
Copper oxide behavior in silicoborate glazy glass
-
(Coatings. Enamels.)
-
Copper-containing glazed glasses in the system B 2 O 3 - SiO 2 - Al 2 O 3 < / sub> - CaO - CuO with a molar content of copper oxide from 5 to 25%, introduced during the synthesis of glasses. Glasses ...
-
33.
Migration of harmful substances from colored glazy coatings into model medium
-
(Science for ceramic production)
-
The results of a study of colored glaze coatings containing coloring oxides (Cr 2 O 3 , CuO, CoO, Mn 2 O 3 ), introduced into the charge both when cooking colored frits and when grinding a frit of ...
-
34.
Improvement of pigment-free technology for production of dense-colored glazes
-
(Coatings. Enamels.)
-
As a result of the improvement of the technology for obtaining brightly colored glass coatings, a new method of coloring glazes has been proposed, which consists in the course of a complex of physicochemical ...
-
35.
Structure of the porcelain masses and glazes based on the rocks from Gusevskoe deposit
-
(Science for ceramic production)
-
The structure of porcelain and glazes based on the Gusevsky stone has been investigated. Revealed its positive and negative impact on the quality of porcelain products. Tab. 2, ill. 2, bibliography: 3 ...
-
36.
Using of wollastonite in compositions of unfritted zirconium glazes
-
(Raw materials)
-
The possibility of using wollastonite as one of the main components of jade muffled glazes for sanitary ceramics is shown. The main physicochemical properties of the synthesized coatings have been determined, ...
-
37.
Phase composition and structure of matte low-melting glazes
-
(Coatings)
-
... glazed glasses and coatings by methods of X-ray phase analysis, electron microscopy, infrared spectroscopy, etc. are presented. The relationship between the structure and phase composition of coatings ...
-
38.
Dextrin effect on the properties of glazes, ceramic dyes and reduction of cobalt oxide
-
(Science for ceramic production)
-
... metallization". With an increase in the amount of dextrin in the paint and an increase in its adhesive ability, the thickness of the glaze layer at the places where the paint is applied decreases, ...
-
39.
Waste-based decorative glazes for facade ceramics
-
(Utilization of waste)
-
The composition of the glaze based on the sludge of the regeneration of acidic effluents from the Dyatkovo Crystal Plant and the technology for producing colored glass-crystalline coatings for facade bricks ...
-
40.
Evaluation of corrosive resistance of refractory materials in fritted glaze melting furnaces
-
(Science for ceramic production)
-
The corrosion resistance of refractories in frit melts used at ZAO Velor (Orel) has been investigated. Based on the results of the work carried out, it was proposed to replace the MKS refractory material, ...
