-
1.
Studies in polyfunctional composite silicate materials prosessing. Education and training for construction matrials industry
-
(Science for glass and ceramic production)
-
To the 110th anniversary of the South Russian State Polytechnic University (NPI) named after M.I. Platova. The history of education, the types of activities of the department? General chemistry and technology ...
-
2.
Multifunctional high-temperature coatings for heat-insulating materials
-
(Coatings)
-
The outer surfaces of reusable spacecraft are covered with special heat-shielding materials. These materials also need to be protected from erosion, moisture, etc. with thermal control coatings. At VIAM, ...
-
3.
Process optimization in manufacturing procedure of high-quality oxide functional materials
-
(Science for ceramic production)
-
On the example of a single optimization principle, the role of technological trends in the technologies used in improving the quality of the final product in the conditions of real ceramic production is ...
-
4.
FABRICATION OF TRANSPARENT QUARTZ GLASS USING ADDITIVE TECHNOLOGIES
-
(Not-set)
-
The article presents the development of a technique for producing transparent silica glass products using LCD-stereolithography using a photopolymer composite. It is shown that ultrasonic treatment of ...
-
5.
EFFECT OF DYSPROSIUM DOPING ON MICROSTRUCTURE AND DEGREE OF TEXTURING OF BISMUTH TELLURIDE-BASED THERMOELECTRIC MATERIALS
-
(Not-set)
-
The purpose of this work was to prepare and identify the features of the microstructure and the degree of texturing of the thermoelectric material Bi2Te2.7Se0.3 doped with dysprosium. Textured Bi2-xDyxTe2.7Se0.3 ...
-
6.
JOINT PROCESSING OF QUARTZ-LEUCOXENE CONCENTRATE AND BRUCITE CONTAINING WASTE FROM THE PRODUCTION OF REFRACTORY MATERIALS TO OBTAIN COMPLEX COAGULANTS
-
(Not-set)
-
The volumes of large-tonnage mineral waste generation cause serious concern from the side of environmental supervision. Most of the mineral waste is a valuable secondary raw material, but the lack of integrated ...
-
7.
TRADITIONS AND PERSPECTIVES OF THE TECHNOLOGY OF SILICATES AND NANOMATERIALS DEPARTMENT
-
(Not-set)
-
... technical and building ceramics with enhanced functional properties, foam glass-ceramic materials, proppants for oil and gas production, biomedical ceramics, magnesian binders with increased strength and ...
-
8.
GEL CASTING METHOD FOR THE PRODUCTION OF CERAMIC MATERIALS
-
(Not-set)
-
Gel casting is one of the new and promising methods for producing ceramics. Modern research on the production of ceramic materials by gel casting covers a wide range of materials, including both dense ...
-
9.
GLASSY FUNCTIONAL FILLERS OF GLASS IONOMER CEMENTS IN THE SrO–Al2O3–P2O5–SiO2–F SYSTEM
-
(Not-set)
-
Based on glass in the SrO–Al2O3–P2O5–SiO2–F system, functional glass fillers for glass ionomer cements containing up to 13 wt. % fluorine were obtained. The high level of radiopacity of the filling material ...
-
10.
PIEZOCERAMICS TECHNOLOGIES: APPROACHES FOR ENVIRONMENTAL IMPACT MITIGATION
-
(Not-set)
-
The functional ceramic materials are broadly used in the electronic industry. Many of them are comprised of ferroelectric materials because of their outstanding piezoelectric and dielectric properties. ...
-
11.
High Temperature Ceramic Composite (SiC/SiCw) Materials
-
(Not-set)
-
The issue of the prospects of using ceramic composite materials in heat-loaded units of advanced aviation technology instead of metallic materials is considered. Research has been carried out on the manufacture ...
-
12.
Phase Transformations in High-Temperature Fibrous Materials at Influence of Non-Equilibrium Temperature and Light Stream
-
(Glassceramics)
-
Investigations of changes in the phase composition and structure of modern ceramic materials under the action of a high-intensity light flux have been carried out. For the experiment, the technological ...
-
13.
The influence of woven mineral fillers chemical nature on polymer composite materials properties
-
(At the enterprises and institutes)
-
The physicomechanical (density, tensile and compressive strength), thermophysical (TCLE) and dielectric (dielectric constant) properties of polymer composite materials based on woven fillers of mineral ...
-
14.
Quasi-faceted call computing model and its application for bulk materials
-
(At the enterprises and institutes)
-
On the example of ordered packages of bulk media? balls considered a model of their structure? with cells in the form of conditionally cut (quasi-faceted) parallelepipeds, the vertices of which are located ...
-
15.
Marnetic separation of raw materials for glass and ceramics production. Aspects of ferrous impurities control
-
(Raw materials)
-
Numerous data on the magnetic separation of raw materials for the production of glass and ceramics are summarized with an additional key indicator - the separation efficiency (relative decrease in the ...
-
16.
LASER-INDUCED TRANSFER OF COLORING AGENT TO GLASS FOR MARKING STRUCTURAL OPTICS PRODUCTS
-
(Not-set)
-
A laser marking process for glass products was studied. This process involves laser-induced transfer of ink vapor to the product surface upon irradiation from the opposite side through the glass. A pulse-periodic ...
-
17.
EFFECT OF CeO2 ON THE STRUCTURE AND PROPERTIES OF ALUMINA-ZIRCONIA CERAMICS PREPARED BY PRESSURELESS SINTERING AND HOT PRESSING
-
(Not-set)
-
The influence of ceria (CeO2: 0…3,56 wt. %) and sintering method (pressureless sintering in air, hot pressing in Ar) on the phase composition, microstructure, and properties of alumina-zirconia ceramics ...
-
18.
STUDY OF DEGRADATION OF LUMINESCENT PROPERTIES OF ERBIUM-DOPED ZINC-TELLURITE GLASSES UNDER TROPICAL CLIMATE CONDITIONS
-
(Not-set)
-
Glasses in the TeO2–ZnO system doped with Er3+, Yb3+, Nd3+ were studied. The influence of the synthesis atmosphere on the properties was determined. The photoluminescence intensity, absorption, refractive ...
-
19.
OPERATIONAL-DIGITAL ANALYZER OF CONTENT OF MAGNETICALLY ACTIVE FERRO-IMPURITIES OF LOOSE MEDIA (USING FELDSPAR AND QUARZ SAND AS AN EXAMPLE)
-
(Not-set)
-
In the development of standard magnetic methods for polyoperative control of the content of magneto-active (ferrous) particles in samples of bulk media (in particular, glass and ceramic industries), an ...
-
20.
EVALUATION OF ARMOR PROPERTIES OF DIAMOND-SILICON CARBIDE CERAMIC MATERIAL FABRICATED BY REACTION SINTERING TECHNOLOGY
-
(Not-set)
-
This study demonstrates the functional advantages of reaction-sintered diamond-silicon carbide (D–SiC) ceramics for armor applications compared to conventional materials including silicon carbide, boron ...
