-
21.
SYNTHESIS OF A FRIT FOR OBTAINING ENAMEL COATING OF STEEL PIPES BY THE METHOD OF INDUCTION HEATING
-
(Not-set)
-
The paper presents the results of a study of the processes of glass formation during the production of a frit by the method of induction heating. According to X-ray phase analysis, the resulting frit is ...
-
22.
A PRACTICE-ORIENTED METHOD FOR ESTIMATING THE SPECIFIC ENERGY OF DESTRUCTION OF CERAMIC COMPOSITIONS OF THE ABRASIVE GRAIN–CERAMIC BINDER–PORES SYSTEM
-
(Not-set)
-
The article is devoted to the development of an original production method for estimating the specific energy of destruction of ceramic compositions of the “abrasive grain–ceramic binder–pores” system. ...
-
23.
INVESTIGATION OF THE LANTHANUM HEXABORIDE OBTAINING PROCESSES BY THE METHOD OF BOROTHERMAL REDUCTION
-
(Not-set)
-
... ?C. The use of the spark plasma sintering method, however, makes it possible to reduce the temperature of synthesis of a single-phase powder of lanthanum hexaboride to 1700 and 1600 ?C with an excess boron ...
-
24.
GEL CASTING METHOD FOR THE PRODUCTION OF CERAMIC MATERIALS
-
(Not-set)
-
Gel casting is one of the new and promising methods for producing ceramics. Modern research on the production of ceramic materials by gel casting covers a wide range of materials, including both dense ...
-
25.
INFLUENCE OF THE METHOD FOR THE SYNTHESIS OF NiO/-SiOH COMPOSITES ON THE OBTAINED TEXTURAL PROPERTIES
-
(Not-set)
-
The article considers two methods for the synthesis of composite precursors for the production of liquid-phase hydrogenation catalysts based on nickel and silica gel. A comparative analysis of synthesis ...
-
26.
METHOD FOR ELIMINATION OF FLATNESS DEFECTS ON GLASS PLATES FOR THEIR THERMAL JOINING
-
(Not-set)
-
A method has been developed to eliminate gaps between glass plates during thermal bonding using a system for distributing the mechanical load. Theoretical and experimental studies of the proposed method ...
-
27.
THE MANUFACTURING METHOD EFFECT ON THE STRUCTURE AND ELECTRICAL PROPERTIES OF SOLID SOLUTION Ce0.8Y0.2О2-?
-
(Not-set)
-
The solid solution Ce0.8Y0.2O2-? was obtained by three methods: sol gel, glycine nitrate and solid-state reaction. The synthesis temperature was 1350 ?C for the sample obtained by the sol gel method and ...
-
28.
EFFECT OF THE SYNTHESIS METHOD ON THE PHYSICOCHEMICAL PROPERTIES AND PHASE COMPOSITION OF ZIRCONIA
-
(Not-set)
-
Hydrated zirconia was obtained by solid state synthesis and precipitation. Physicochemical properties and phase composition of calcined hydrated zirconia was investigated by XRD, IR and DSC-TG. Hydrated ...
-
29.
OBTAINING OF ALKALINE-FREE ALUMINOSILICATE GLASS CERAMICS BY SOL-GEL METHOD AND INVESTIGANING OF ITS PROPERTIES
-
(Not-set)
-
The glass-crystalline ceramic materials in SiO2–Al2O3–RO (RO–MgO, SrO, BaO and their combinations) systems have been synthesized by the sol-gel method. The factors influencing on the sol-gel formation ...
-
30.
METHODS OF UNCREASING OF THE WAX MODEL SURFACE PRIMARY WETTABILITY DURING LOST-WAX CASTING
-
(Not-set)
-
Lost-wax casting is one of the most advanced ways to obtain geometrically complex castings of high quality. One of the main factors influenced on the casting properties is the quality of the ceramic mold ...
-
31.
OXIDE-CONTAINING MINERAL FIBERS: TYPES, METHODS OF PRODUCTION, APPLICATION AND MANUFACTURERS (REVIEW)
-
(Not-set)
-
The article provides an overview of mineral oxide fibers of various chemical composition: aluminosilicate, alumina, silica, bio-soluble, zirconium oxide fibers and others. Methods for producing discrete ...
-
32.
Method of Calculation of Structural Parameters Ceramic Slickers
-
(Not-set)
-
The method of determining the volume-geometric structure of a corundum slip is refined by additional calculation of the average coordination number, the specific surface of the system S0 (the surface of ...
-
33.
New Method for Calculating Structural Parameters of Glass Membranes
-
(Not-set)
-
A new method for calculating the structural parameters of glass membranes is proposed, which allows calculating the average coordination number, specific surface area, average radii of the necks of spherical ...
-
34.
On the Issue of Obtaining High-Density Corundum Ceramics with a Defect-Free POlished Surface and Low Roughness by the SPS Method
-
(Not-set)
-
The fundamental possibility of obtaining corundum ceramics with density close to theoretical, with defect-free polished surface, with low roughness, using as a starting material finely dispersed non-aggregated ...
-
35.
Features of the Synthesis of Magnesium Aluminate Spinel by Sol Gel Method
-
(Not-set)
-
... spinel are presented. It was found that the optimal condition for the synthesis of spinel MgAl 2 O 4 by the sol-gel method using alumina-containing waste is a temperature of 1000 ° C and a holding ...
-
36.
Investigation of the Adhesion Strength of Reactive Coatings on VZh171 Alloy by Sclerometry Method
-
(Not-set)
-
Studies of the adhesion strength of an enamel reaction-hardening coating on a heat-resistant nickel alloy VZH171 by the sclerometry method have been carried out. The threshold value of the loads required ...
-
37.
Influence of the Anionic Composition of the Starting Salts on the Preparation of Zinc Orthostannate by the Sol-Gel Method
-
(Not-set)
-
The effect of the anionic composition of zinc salts upon interaction with tin (IV) chloride on the preparation of zinc orthostannate by the sol-gel method was studied. It was determined that the minimum ...
-
38.
Production and Properties of
Thin-Filmed Biomaterials for the SiO2-P2O5-СаO-ZnO System Us-ing the Zol-Gel Method
-
(Not-set)
-
The sol-gel method was used to synthesize thin films for the SiO 2 -P 2 O 5 -CaO-ZnO system. Compositions and technology for producing thin-film materials on a silicon substrate (model substrate) ...
-
39.
Identification of Porcelain Products by Non-Destructive Optical
Spectroscopy Methods
-
(Not-set)
-
The results of a study of the use of non-destructive contactless methods of optical spectroscopy - registration of diffuse reflectance spectra in the UV-VIS-NIR range and photoluminescence for the identification ...
-
40.
The Dielectric Method for Controlling the Recipe and Technologi-cal Parameters Upon Receipt of Sodium Silicate Materials
-
(Not-set)
-
... to the nature of the change in the strength and water resistance of the modified samples depending on the content of the modifier in the SNK. Based on the foregoing, the method of dielectric constant for ...